journal article·2005-04

Structural- and mechanical-properties of hot-pressed surface modified TixSi100−x (x=62.5 and 85 at.%) powders synthesized by mechanical alloying

F. Simões, B. Trindade

Materials Science and Engineering: A· Volume 397· Issue 1-2
Publisher page

Abstract

Abstract In this paper, we are describing a new procedure for the synthesis of metallic- and intermetallic-matrix composites from powders obtained by mechanical alloying, subsequently coated by magnetron sputtering and compacted by hot isostatic pressing. Mixtures of Ti 62.5 Si 37.5 and Ti 85 Si 15 (numbers indicate at.%) were mechanically-alloyed from elemental titanium and silicon powders in a planetary ball-mill for 50 h and subsequently coated with a titanium thin film. The presence of a metallic layer on the surface of the powders affects the mechanical properties of the hot-compacted samples. The Ti thin film increases the Young modulus and fracture-toughness of the Ti 85 Si 15 samples; this effect is not seen in the Ti 62.5 Si 37.5 alloy. Hardness is not significantly affected. In the case of the Ti 62.5 Si 37.5 alloy, partial oxidation of the coating was observed during the synthesis procedure; this procedure is responsible for the increase in hardness, in the Young's modulus and in the decrease in fracture-toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Meschter · JOM · 1989 · 41 · 5210.1007/BF03220384 ↗
2. Zhang · Key Eng. Mater. · 2003 · 249 · 20510.4028/www.scientific.net/KEM.249.205 ↗
3. Ruess · Scripta Metall. Mater. · 1990 · 24 · 102110.1016/0956-716X(90)90293-P ↗
4. Zhang · Acta Mater. · 1998 · 46 · 353510.1016/S1359-6454(98)00026-3 ↗
5. Li · J. Eur. Ceram. Soc. · 2002 · 22 · 55110.1016/S0955-2219(01)00304-1 ↗
6. Mitra · Metall. Mater. Trans. A. · 1998 · 29 · 162910.1007/s11661-998-0086-1 ↗
7. Dias · Mater. Sci. Eng. A · 2004 · 364 · 27310.1016/j.msea.2003.08.029 ↗
8. Simões · Mater. Technol. · 2003 · 18/2 · 9810.1080/10667857.2003.11753021 ↗
9. Williamson · Acta Metall. · 1953 · 1 · 2210.1016/0001-6160(53)90006-6 ↗
10. Antunes · Surf. Coat. Technol. · 2002 · 149 · 2710.1016/S0257-8972(01)01413-X ↗
11. Ponton · Mater. Sci. Technol. · 1989 · 5 · 86510.1179/mst.1989.5.9.865 ↗
12. ASTM B311-93, Volume 02.05 ASTM standards, American Society for Testing and Materials (Eds.), West Conshohocken, PA, 1998.pp. 81–83.
13. International Centre for Difraction Data, ICDD, Pennsylvania, USA, Ti5Si3, (78–1429).
14. International Centre for Difraction Data, ICDD, Pennsylvania, USA, α-Ti, (44–1294).
15. Guan · J. Alloys Compounds · 1997 · 252 · 24510.1016/S0925-8388(96)02720-X ↗
16. Itsukaichi · J. Mater. Res. · 1993 · 8 · 181710.1557/JMR.1993.1817 ↗
17. Min · J. Mater. Sci. · 1995 · 30 · 547910.1007/BF00351561 ↗
18. Thom · 1994 · 413
19. G. Frommeyer, R. Rosenkranz, Proceedings of the International Conference on PM Aerospace Materials, Lausanne, Switzerland, Nov. 4–6, 1991. MPR Publishing Services Ltd., Bellstone, Shrewsbury, U.K., 1991 pp. 29:1–29:18.
20. Rosenkranz · Mater. Sci. Eng. A · 1992 · 152 · 28810.1016/0921-5093(92)90081-B ↗
21. Kumar · 1995 · 211