journal article·2014-06

Effects of Zn addition on the microstructure and tensile properties of hot-extruded Al–16wt% Al4Sr in-situ composite

K. Tavighi, M. Emamy, Z. Tanhaee, S.E. Vaziri Yeganeh

Publisher page

Abstract

Abstract In current research, the effects of Zn addition (3–15 wt%) on the microstructure and tensile properties of hot-extruded Al–16 wt% Al 4 Sr composite have been investigated. Microstructural examinations were assessed by the use of scanning electron microscopy and energy dispersive spectroscopy. The results showed that Zn addition improves tensile properties and the mechanism responsible for this progress is solid solution strengthening. Tensile testing of the hot-extruded Al–16%Al 4 Sr composite revealed that the addition of 15 wt% Zn to the composite improves ultimate tensile strength (UTS) from 179 MPa to 220 MPa, but reduces elongation percent. Moreover, hot extrusion was found to be powerful in refining coarse intermetallics and achieving microstructural uniformity apart from reducing porosities, which all result in toughness enhancement. The study of fracture surfaces of all hot-extruded MMCs revealed that the ductile mode of fracture is dominant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Lloyd · Int. Mater. Rev. · 1994 · 39 · 110.1179/imr.1994.39.1.1 ↗
2. Kaczmar · J. Mater. Process. Technol. · 2000 · 106 · 5810.1016/S0924-0136(00)00639-7 ↗
3. Chapman · Wear · 1999 · 236 · 8110.1016/S0043-1648(99)00259-8 ↗
4. Shorowordi · J. Mater. Process. Technol. · 2003 · 142 · 73810.1016/S0924-0136(03)00815-X ↗
5. Zhiqiang · Mater. Des. · 2005 · 26 · 45410.1016/j.matdes.2004.07.026 ↗
6. Arik · Mater. Des. · 2006 · 27 · 79910.1016/j.matdes.2005.01.024 ↗
7. Rahmani Fard · J. Mater. Process. Technol. · 2007 · 187–188 · 43310.1016/j.jmatprotec.2006.11.077 ↗
8. Kori · Mater. Sci. Eng. A · 2000 · 283 · 9410.1016/S0921-5093(99)00794-7 ↗
9. Liao · Mater. Sci. Eng. A · 2002 · 335 · 6210.1016/S0921-5093(01)01949-9 ↗
10. Shin · Mater. Sci. Eng. A · 2012 · 532 · 15110.1016/j.msea.2011.10.076 ↗
11. Timpel · Ultramicroscopy · 2011 · 111 · 69510.1016/j.ultramic.2010.12.023 ↗
12. Bai · Mater. Sci. Eng. A · 2006 · 419 · 18110.1016/j.msea.2005.12.017 ↗
13. Yang · J. Alloy. Compd. · 2008 · 461 · 29810.1016/j.jallcom.2007.06.124 ↗
14. Liao · Procedia Eng. · 2011 · 27 · 80510.1016/j.proeng.2011.12.524 ↗
15. Ouyang · Physica B · 2011 · 406 · 368110.1016/j.physb.2011.06.071 ↗
16. ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM International, Materials Park, OH, USA, 1992.
17. Tavighi · Mater. Des. · 2013 · 46 · 59810.1016/j.matdes.2012.11.033 ↗
18. Cöcen · Compos. Sci. Technol. · 2002 · 62 · 27510.1016/S0266-3538(01)00198-1 ↗
19. Bahrami · Key. Eng. Mater. · 2011 · 471–472 · 117110.4028/www.scientific.net/KEM.471-472.1171 ↗
20. Tsao · Mater. Charact. · 2002 · 48 · 34110.1016/S1044-5803(02)00276-0 ↗
21. Tekman · Mater. Sci. Eng. A · 2003 · 360 · 36510.1016/S0921-5093(03)00461-1 ↗
22. Abbaschian · 2009
23. Zener · J. Appl. Phys. · 1949 · 20 · 95010.1063/1.1698258 ↗
24. Rozak · J. Compos. Mater. · 1992 · 26 · 207910.1177/002199839202601405 ↗
25. Suzuki · J. Jpn. Inst. Light Met. · 1993 · 43 · 53310.2464/jilm.43.533 ↗
26. Dieter · 1988
27. Martin · 1998
28. Babout · Acta Mater. · 2004 · 52 · 451710.1016/j.actamat.2004.06.009 ↗