Effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of AISI D2 tool steel
Source abstract
Abstract
Abstract Tool steels are widely used in various industries, such as automotive, shipbuilding, manufacturing, and marine, for rolling mills, blanking metals, and punching dies, given their distinctive hardness, resistance to abrasion, and deformation. However, joining tool steels using the conventional fusion welding process is difficult because of the formation of dendritic structures and hot cracking, which affect the strength of joining. Therefore, this study proposed the direct partial remelting process (DPRMP) for the butt joining of AISI D2 tool steel. Moreover, different uniaxial loads of 0, 0.5, 2.5, and 5 N were applied during the joining process to investigate the microstructural evolution and mechanical properties of DPRMP samples. Results showed that the ferrite phase in the base material was changed to the austenite phase with globular shape in the joined samples through DPRMP. In addition, increasing the uniaxial load from 0 N to 5 N reduced the average grain size, increased the shape factor, and caused joining defects, such as voids, to disappear. Furthermore, the tensile strength of the DPRMP samples improved by increasing uniaxial loading from 0 N to 5 N due to the effect of grain boundary diffusion and the decrease in eutectic carbide at the joint interface. The highest tensile strength was achieved in DPRMP-5, with a value of 652 MPa and a welding efficiency of 103%. Moreover, the average hardness value of the fusion zone improved in the DPRMP samples and increased to 400 HV wherein the as-received material presented a value of 226 HV.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Study of carbide evolution during thermo-mechanical processing of AISI D2 tool steel10.1007/s11665-012-0340-y ↗
2. Mechanical properties and microstructure characterization of AISI D2 and O1 coldwork tool steels10.3390/met9111169 ↗
3. Effect of cerium and lanthanum on the microstructure and mechanical properties of AISI D2 tool steel10.1016/j.msea.2013.01.074 ↗
4. Effect of machining parameters of AISI D2 tool steel on electro discharge machining
5. Microstructural properties of semisolid welded joints for AISI D2 tool steel10.17576/jkukm-2014-26-04 ↗
6. Densification of a high chromium cold work tool steel powder in different atmospheres by SLPS: microstructure, heat treatment and micromechanical properties10.1016/j.msea.2020.139053 ↗
7. Failure analysis of guides made of high-strength AISI D2 tool steel10.1007/s11668-015-0038-1 ↗
8. Improvement of wear resistance of some cold working tool steels10.1016/j.wear.2017.03.023 ↗
9. A comprehensive review on cold work of AISI D2 tool steel
10. Microstructure and mechanical properties of thixowelded AISI D2 tool steel
11. Thixio-Joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties10.3139/146.111080 ↗
12. Effects of carbon and chromium on microstructure evolution and mechanical properties of friction stir weldment in medium-carbon steel10.1016/j.msea.2019.138060 ↗
13. Microstructural investigations of XW-42 and M2 tool steels in semi-solid zones via direct partial remelting route10.1007/s10853-011-5749-4 ↗
14. Morphological evolution during partial Re-melting
15. Microstructure and mechanical properties of Mg97Zn1Y2 alloy reinforced with LPSO structure produced by semisolid squeeze casting10.1016/j.msea.2018.07.025 ↗
16. On the microstructure and mechanical properties of the AlCoCrCuNi high entropy alloy processed in the semi-solid state10.1016/j.msea.2017.10.012 ↗
17. Trend and development of semisolid metal joining processing10.1155/2015/846138 ↗
18. Forming and joining of commercial steel grades in the semi-solid state10.1016/S0924-0136(02)00766-5 ↗
19. Automated semi-solid forging of steel components by means of thixojoining10.4028/www.scientific.net/SSP.116-117.383 ↗
20. Method and apparatus for metal solid freeform fabrication utilizing partially solidified metal slurry
21. Joining metals by combining mechanical stirring and thermomechanical treatment to form a globular weld structure10.4028/www.scientific.net/SSP.116-117.397 ↗
22. Semisolid joining of zinc AG40A alloy by partial remelting and mechanical stirring10.4028/www.scientific.net/SSP.141-143.225 ↗
23. Semisolid joining of aluminum A356 alloy by partial remelting and mechanical stirring10.1016/S1003-6326(09)60376-9 ↗
24. Mushy/Semi-solid metal forming technology - present and future10.1016/S0007-8506(07)61705-3 ↗
25. High-temperature deformation resistance and forming behavior of two-step SIMA-processed 6066 alloy10.1016/j.msea.2016.02.041 ↗
26. Effects of pre-deformation on microstructure and tensile properties of Al-Zn-Mg-Cu alloy produced by modified strain induced melt activation10.1016/S1003-6326(16)64349-2 ↗
27. Effects of predeformation and semi-solid processing on microstructure and mechanical properties of Cr-V-Mo steel10.1016/j.jmatprotec.2012.09.021 ↗
28. Comparison of microstructural evolution of 7075 aluminum alloy fabricated by SIMA and RAP10.1016/j.jmatprotec.2016.06.020 ↗
29. Microstructural evolution during DPRM process of semisolid ledeburitic D2 tool steel10.1155/2013/828926 ↗
30. Effect of operational parameters in the semi-solid processing of Al/SiC composites from machining chips
31. A study of microstructural evolution of AISI D2 tool steel during Direct Partial Remelting method
32. A study on the microstructure and mechanical properties of AISI D2 tool steel modified by niobium10.1016/j.msea.2012.07.061 ↗
33. Study of microstructure and thermal properties of as-cast High carbon and high chromium tool steel
34. Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process10.1016/S1003-6326(10)60595-X ↗
35. Thixotropic rheology of semisolid metal suspensions10.1016/S0924-0136(00)00731-7 ↗
36. Effect of uniaxial load on microstructure and mechanical properties of thixo-joint AISI D2 tool steel10.15282/jmes.13.2.2019.17.0414 ↗
37. Microstructural evolution of solid-solution-treated Zn-22Al in the semisolid state10.1016/j.jmst.2013.04.003 ↗
38. Texture evolution in semi-solid partial remelting and its effect on the microstructure of magnesium alloy10.1016/j.matlet.2018.11.075 ↗
39. Problematic standard errors and confidence intervals for skewness and kurtosis10.3758/s13428-010-0044-x ↗
40. Higher statistical moments and an outlier detection technique as two alternative methods 2 that capture long-term changes in continuous environmental data, Hydrol
41. Chemical composition and morphology of M7C3 eutectic carbide in high chromium white cast iron alloyed with vanadium10.2355/isijinternational.52.2200 ↗
42. Metastable structure of austenite base obtained by rapid solidification in a semi-solid state10.1016/j.jallcom.2010.12.211 ↗
43. Fracture surface analysis in thixojoined tool steels10.1155/2014/489487 ↗
44. Interfacial strength and structure of stainless steel-semi-solid aluminum alloy clad metal10.1016/j.matlet.2005.08.015 ↗
45. Sintering behaviour and fracture toughness characterization of D2 matrix tool steel, comparison with wrought and PM D210.1016/S1359-6462(01)01253-2 ↗
46. Handbook of friction materials and their applications
47. Problems in laser repair cladding a surface AISI D2 heat-treated tool steel10.1080/09507116.2011.592707 ↗
48. Metallurgical characterization of a weld bead coating applied by the PTA process on the D2 tool steel10.1590/0104-9224/SI2102.10 ↗
49. Microstructural and abrasive characteristics of high carbon Fe-Cr-C hardfacing alloy10.1016/j.triboint.2009.12.045 ↗