journal article·2018-07

Quantitative study of the effect of stress on the precipitation in an Al-Cu-Mg-Ag alloy single crystal

Xiaobin Guo, Yunlai Deng, Xinming Zhang

Publisher page

Abstract

Abstract Al-1.96Cu-0.24Mg-0.18Ag alloy single crystal with ( 2 ¯ 15) plane orientation has been used to investigate the effect of external stresses (50, 100, 134, 160 and 200 MPa) on the precipitation behavior of Ω, θ′ and S precipitates. The microstructure of the aged specimens was observed by transmission electron microscopy (TEM), selected area electron diffraction (SAED) and scanning transmission electron microscopy (STEM). X-ray elemental mapping under high-angle annular dark-field (HAADF) was used to analyze the elements in the precipitates. TEM images showed that the amount and distribution of the three types of precipitates are different in specimens aged under different external stresses. Along with the SAED and STEM images, the type, amount and distribution of Ω, θ′ and S precipitates were quantitatively measured. Compared to the results on stress-free aged specimen, the amount of Ω precipitates decreases in stress aged samples, while that of the S precipitates increases, and the amount of θ′ precipitates is constant with low value. The orienting effect of stress on Ω precipitates gets serious at 100 MPa, but it decreases at 200 MPa. The orienting effect of stress on S precipitates is quite similar to that in the case of the Ω phase. As the competition of acquiring Mg and Cu atoms between S and Ω precipitates, the orienting effect of stress on S precipitates is serious from 100 to 160 MPa. Both the orienting effect of stress on Ω and S precipitates decreased because of the inhibiting effect of dislocations at 200 MPa. The orienting effect on θ′ variants is different from that of Ω precipitates. It is serious at 50 MPa and gets weaker at 100–200 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Experimental and numerical analysis of toughness anisotropy in AA2139 Al–alloy sheet10.1016/j.actamat.2009.04.046 ↗
2. Effects of grain shape and texture on the yield strength anisotropy of Al–Li alloy sheet10.1016/S1359-6462(98)00481-3 ↗
3. Texture-microstructure effects in yield strength anisotropy of 2090 sheet alloy10.1016/0956-716X(90)90409-A ↗
4. Strengthening effect of unshearable particles of finite size: a computer experimental study10.1016/S1359-6454(99)00179-2 ↗
5. Recent development in aluminium alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
6. Influence of multi-step heat treatments in creep age forming of 7075 aluminum alloy: optimization for springback, strength and exfoliation corrosion10.1016/j.matchar.2012.05.012 ↗
7. Effect of T1 precipitate on the anisotropy of Al–Li alloy 209010.1016/0956-7151(93)90028-Q ↗
8. Effect of stress during ageing on the precipitation of θ′ in Al–4 wt%Cu10.1007/BF02658406 ↗
9. Effects of preferentially aligned precipitates on plastic anisotropy in Al-Cu-Mg-Ag and Al-Cu alloys10.1016/S0921-5093(98)00826-0 ↗
10. The precipitate Ω phase in Al-Cu-Mg-Ag alloys10.1016/0001-6160(89)90005-9 ↗
11. Influence of a microalloying addition of Ag on the precipitation kinetics of an Al–Cu–Mg alloy with high Mg:Cu ratio10.1016/j.actamat.2015.07.032 ↗
12. Mondolfo · 1976
13. Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys10.1179/174328005X14357 ↗
14. Effects of stress-aging on the microstructure and properties of an aging forming Al–Cu–Mg–Ag alloy10.1016/j.matdes.2014.01.048 ↗
15. Effect of pre-straining on the aging behavior and mechanical properties of an Al–Cu–Mg–Ag alloy10.1016/j.msea.2014.11.094 ↗
16. Discussion of “Effect of stress during aging on the precipitation of θ′ in Al–4 wt%Cu”
17. The inhibiting effect of dislocation helices on the stress-induced orientation of S′ precipitates in Al–Cu–Mg alloy10.1016/j.matchar.2015.07.020 ↗
18. The precipitation behavior of Al–Cu–Mg–Ag single crystal during aging under elevated compression stresses10.1016/j.msea.2016.05.039 ↗
19. Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys10.1179/174328005X14357 ↗
20. Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy10.1016/j.msea.2017.06.110 ↗
21. Effects of cold work on precipitation in Al–Cu–Mg–(Ag) and Al–Cu–Li(Mg–Ag) alloys10.1007/BF02670753 ↗
22. A crystallographic orientation based model for describing the precipitation strengthening of stress-aged Al–Cu alloy10.1016/j.msea.2015.07.067 ↗
23. A precipitate-strengthening model based on crystallographic anisotropy, stress-induced orientation, and dislocation of stress-aged Al-Cu-Mg Single10.1007/s11661-017-4257-9 ↗
24. On the effect of stress on nucleation and growth of precipitates in an Al–Cu–Mg–Ag alloy10.1007/BF02595436 ↗