A thermomechanical study of the effects of mold topography on the solidification of Aluminum alloys
Source abstract
Abstract
A thermomechanical study of the effects of mold topography on the solidification of Aluminum alloys at early times is provided. The various coupling mechanisms between the solid-shell and mold deformation and heat transfer at the mold/solid-shell interface during the early stages of Aluminum solidification on molds with uneven topographies are investigated. The air-gap nucleation time, the stress evolution and the solid-shell growth pattern are examined for different mold topographies to illustrate the potential control of Aluminum cast surface morphologies during the early stages of solidification using proper design of mold topographies. The unstable shell growth pattern in the early solidification stages results mainly from the unevenness of the heat flux between the solid-shell and the mold surface. This heat flux is determined by the size of the air-gaps formed between the solidifying shell and mold surface or from the value of the contact pressure. Simulation results show that a sinusoidal mold surface with a smaller wavelength leads to nucleation of air-gaps at earlier times. In addition, the unevenness in the solid-shell growth pattern decreases faster for a smaller wavelength. Such studies can be used to tune mold surfaces for the control of cast surface morphologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Hector · J. Appl. Mech. · 2000 · 67 · 15510.1115/1.321160 ↗
2. Yigit · J. Appl. Mech. · 2000 · 67 · 6610.1115/1.321166 ↗
3. Yigit · J. Appl. Mech. · 2000 · 67 · 7710.1115/1.321167 ↗
4. Yigit · J. Therm. Stress. · 2002 · 25 · 66310.1080/01495730290074360 ↗
5. Lewis · Metall. Mater. Trans. B · 1998 · 29 · 43710.1007/s11663-998-0122-y ↗
6. Richmond · J. Mech. Phys. Solids · 1971 · 19 · 27310.1016/0022-5096(71)90013-5 ↗
7. Zabaras · Comp. Meth. Appl. Mech. Eng. · 1990 · 81 · 33310.1016/0045-7825(90)90060-Y ↗
8. Zabaras · J. Appl. Mech. ASME · 1991 · 58 · 86510.1115/1.2897699 ↗
9. Zabaras · Int. J. Num. Meth. Eng. · 2004 · 60 · 110310.1002/nme.998 ↗
10. Heinrich · Modell. Simul. Mater. Sci. Eng. · 2004 · 12 · 88110.1088/0965-0393/12/5/008 ↗
11. Ceynar · J. Cryst. Growth · 2001 · 222 · 38010.1016/S0022-0248(00)00905-2 ↗
12. Bejan · 1993
13. Strangeland · Metall. Mater. Trans. A · 2004 · 35A · 290310.1007/s11661-004-0238-x ↗
14. Hector · J. Therm. Stress. · 1994 · 17 · 61910.1080/01495739408946283 ↗
15. Li · J. Therm. Stress. · 1995 · 18 · 6910.1080/01495739508946291 ↗
16. Farup · Metall. Mater. Trans. A · 2000 · 31A · 146110.1007/s11661-000-0264-2 ↗
17. Laursen · 2002
18. Zabaras · Int. J. Num. Meth. Eng. · 1999 · 45 · 39910.1002/(SICI)1097-0207(19990610)45:4<399::AID-NME587>3.0.CO;2-E ↗
19. Rappaz · Metall. Mater. Trans. A · 1999 · 30 · 44910.1007/s11661-999-0334-z ↗