Metallic glass hardening after thermoplastic forming
Source abstract
Abstract
Abstract Thermoplastic forming is an important manufacturing technique for the shaping of metallic glass (MG) components. However, property changes of MGs after such forming are unclear. This paper systematically studied the effect of thermoplastic forming on the structure and mechanical properties of a Zr-based MG. It was found that the MG after forming is of higher hardness; yet this effect increases with the forming temperature rise. Localized shear deformation as commonly observed around a Vickers indentation mark in MGs was not found around the indentation mark of the thermoplastically formed MG. The study concluded that the primary mechanism of such property change of the MG is due to the free volume annihilation induced by the structural relaxation during the thermoplastic forming.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural Heritage Materials Analysis · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Suryanarayana · 2011
2. The superplastic forming of bulk metallic glasses10.1007/s11837-005-0093-2 ↗
3. On the nano/micro-mechanics of metallic glass10.1080/10408436.2014.973933 ↗
4. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
5. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
6. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
7. Effects of environmental temperature and sliding speed on the tribological behaviour of a Ti-based metallic glass10.1016/j.intermet.2014.03.011 ↗
8. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
9. Bulk Metallic Glass in Micro to Nano Length Scale Applications
10. Processing of bulk metallic glass10.1002/adma.200902776 ↗
11. Thermoplastic forming of bulk metallic glass—Applications for MEMS and microstructure fabrication10.1016/j.msea.2006.02.398 ↗
12. General nanomoulding with bulk metallic glasses10.1088/0957-4484/26/14/145301 ↗
13. Nanomoulding with amorphous metals10.1038/nature07718 ↗
14. Thermoplastic micro-forming of bulk metallic glasses: a review10.1007/s11837-016-1844-y ↗
15. On the adhesion between metallic glass and dies during thermoplastic forming10.1016/j.jallcom.2017.04.005 ↗
16. Wetting of bulk metallic glass forming liquids on metals and ceramics10.1063/1.3615630 ↗
17. Size-dependent viscosity in the super-cooled liquid state of a bulk metallic glass10.1063/1.4808342 ↗
18. Notable internal thermal effect on the yielding of metallic glasses10.1063/1.3700923 ↗
19. Surface roughness effect on the friction and wear of bulk metallic glasses10.1016/j.wear.2014.11.030 ↗
20. Effects of annealing on the hardness and elastic modulus of a Cu 36 Zr 48 Al 8 Ag 8 bulk metallic glass10.1016/j.matdes.2012.12.071 ↗
21. Revealing structural relaxation of optical glass through the temperature dependence of Young's Modulus10.1111/jace.13179 ↗
22. Homogeneous flow of metallic glasses: a free volume perspective10.1016/j.scriptamat.2005.09.046 ↗
23. Atomic rearrangements in metallic glass: their nucleation and self-organization10.1016/j.actamat.2013.06.046 ↗
24. On the plasticity event in metallic glass10.1080/09500839.2012.755270 ↗
25. Understanding the brittleness of metallic glasses through dynamic clusters10.1557/jmr.2014.11 ↗
26. Mechanical behavior of metallic glasses: Microscopic understanding of strength and ductility10.1146/annurev.matsci.38.060407.130226 ↗
27. Equilibrium viscosity of Zr–Cu–Ni–Al–Nb bulk metallic glasses10.1016/j.scriptamat.2010.06.008 ↗
28. Creation and annihilation of free volume during homogeneous flow of a metallic glass10.1063/1.1827344 ↗
29. A nanoindentation study of serrated flow in bulk metallic glasses10.1016/S1359-6454(02)00303-8 ↗
30. Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation10.1016/j.actamat.2005.04.036 ↗
31. Thermoplastic extrusion of bulk metallic glass10.1016/j.scriptamat.2009.02.052 ↗
32. Hardness, toughness, brittleness and cracking systems in an iron-based bulk metallic glass by indentation10.1016/j.intermet.2008.08.017 ↗
33. Embrittlement of a bulk metallic glass due to sub-T g annealing10.1016/j.actamat.2004.11.040 ↗
34. Manipulation of free volumes in a metallic glass through Xe-ion irradiation10.1016/j.actamat.2016.01.002 ↗
35. HRTEM analysis of nanocrystallization during uniaxial compression of a bulk metallic glass at room temperature10.1016/j.ultramic.2003.08.013 ↗
36. Incipient plasticity and shear band formation in bulk metallic glass studied using indentation10.1007/s11661-007-9338-8 ↗
37. Micro mold filling kinetics of metallic glasses in supercooled liquid state10.1063/1.4795508 ↗
38. Temperature dependence of the thermoplastic formability in bulk metallic glasses10.1063/1.3624666 ↗
39. Structural relaxation of a metallic glass near equilibrium10.1016/0001-6160(85)90112-9 ↗
40. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
41. Mechanical behavior of a Zr-based metallic glass at elevated temperature under high strain rate10.1063/1.3467779 ↗
42. The failure stress of bulk metallic glasses under very high strain rate10.1557/JMR.2010.0176 ↗
43. Mechanical annealing in the flow of supercooled metallic liquid10.1063/1.4892457 ↗
44. Free volume model: high-temperature deformation of a Zr-based bulk metallic glass10.1016/j.actamat.2005.10.054 ↗
45. Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass10.1016/j.scriptamat.2003.09.038 ↗
46. The kinetics of structural relaxation of a metallic glass10.1016/0001-6160(80)90031-0 ↗