journal article·2017-05

Cyclic testing of thin Ni films on a pre-tensile compliant substrate

He Wei, Pierre-Olivier Renault, Eric Le Bourhis, Shibin Wang, Philippe Goudeau

Publisher page

Abstract

Abstract A novel experimental approach to study the cyclic plastic deformation of thin metallic films is presented. 300 nm thick Ni films are deposited on both sides of a pre-tensile soft substrate which allows to deform the films alternately in tension and compression (approximately from +2.7 GPa down to −2 GPa) relative to the as-deposited residual stress state. Nanocrystalline thin films' intrinsic elastic strains (or stresses) and true strains have been measured step by step during two loading/unloading cycles thanks to the X-ray diffraction (XRD) and digital image correlation (DIC) techniques respectively. From the first cyclic deformation, a significant Bauschinger effect is evidenced in the films, however, little or no cyclic hardening is observed during the two cyclic tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Flexible and stretchable electronics for wearable health devices10.1016/j.sse.2015.05.024 ↗
2. Materials and mechanics for stretchable electronics10.1126/science.1182383 ↗
3. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
4. Ueber die veranderung der elasticitatagrenze und dea elasticitatamoduls verschiadener metalle
5. Bauschinger effect in thin metal films10.1016/j.scriptamat.2005.03.048 ↗
6. Size independent stresses in al thin films thermally strained down to −100 °C10.1016/j.actamat.2006.10.052 ↗
7. Young's modulus, Poisson's ratio and failure properties of tetrahedral amorphous diamond-like carbon for mems devices10.1088/0960-1317/15/4/009 ↗
8. Interface controlled plasticity in metals: dispersion hardening and thin film deformation10.1016/S0079-6425(00)00015-3 ↗
9. Atomistic calculation of size effects on elastic coefficients in nanometre-sized tungsten layers and wires10.1016/j.scriptamat.2004.01.033 ↗
10. Bauschinger effect in unpassivated freestanding nanoscale metal films10.1016/j.scriptamat.2008.06.010 ↗
11. In situ tem study of microplasticity and bauschinger effect in nanocrystalline metals10.1016/j.actamat.2010.05.013 ↗
12. Bauschinger and size effects in thin-film plasticity10.1016/j.actamat.2006.06.059 ↗
13. Dislocation dynamics simulations of the bauschinger effect in metallic thin films10.1016/j.commatsci.2011.09.031 ↗
14. A new method to study cyclic deformation of thin films in tension and compression10.1557/JMR.1999.0317 ↗
15. Deformation behavior of thin copper films on deformable substrates10.1016/S1359-6454(01)00293-2 ↗
16. Bauschinger effect and anomalous thermomechanical deformation induced by oxygen in passivated thin cu films on substrates10.1016/S1359-6454(03)00113-7 ↗
17. Effects of stretching and cycling on the fatigue behavior of polymer-supported ag thin films10.1016/j.msea.2013.03.043 ↗
18. Buckling of a stiff thin film on a compliant substrate in large deformation10.1016/j.ijsolstr.2008.01.023 ↗
19. A stretchable form of single crystal silicon for high-performance electronics on rubber substrates10.1126/science.1121401 ↗
20. Controlled buckling of semiconductor nanoribbons for stretchable electronics10.1038/nnano.2006.131 ↗
21. Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling10.1126/science.1260960 ↗
22. Deposition of ultra-thin gold film on in situ loaded polymeric substrate for compression tests10.1016/j.matlet.2011.12.122 ↗
23. X-ray elastic strain analysis of compressed au thin film on polymer substrate10.1016/j.surfcoat.2012.07.090 ↗
24. Comparative study of the mechanical properties of nanostructured thin films on stretchable substrates10.1063/1.4894616 ↗
25. Elastic-strain distribution in metallic film-polymer substrate composites10.1063/1.3293450 ↗
26. B. Culity, Elements of x-ray diffraction, 2nd, Addition-Wesley, MA, London.
27. Hauk · 1997
28. Noyan · 1987
29. Elastic constants of fibre-textured thin films determined by x-ray diffraction10.1107/S0021889809011807 ↗
30. In situ diffraction strain analysis of elastically deformed polycrystalline thin films, and micromechanical interpretation10.1107/S0021889809037376 ↗
31. Stress determination in textured thin films using x-ray diffraction10.1557/S0883769400041658 ↗
32. X-ray diffraction and stress measurement
33. Residual stress/strain analysis in thin films by x-ray diffraction10.1080/10408439508243733 ↗
34. Simmons · 1971
35. He · 2016
36. Study of texture effect on elastic properties of au thin films by x-ray diffraction and in situ tensile testing10.1016/j.actamat.2006.05.036 ↗
37. Application of optical methods to investigate the non-linear asymmetric behavior of ceramics exhibiting large strain to rupture by four-points bending test10.1016/j.jeurceramsoc.2012.06.016 ↗
38. Digital image correlation: from displacement measurement to identification of elastic properties {a review10.1111/j.1475-1305.2006.00258.x ↗
39. Displacement discontinuity or complex shape of sample: assessment of accuracy and adaptation of local dic approach10.1111/str.12150 ↗
40. Strain measurement by digital image correlation: influence of two types of speckle patterns made from rigid or deformable marks10.1111/j.1475-1305.2011.00831.x ↗
41. Assessment of digital image correlation measurement errors: methodology and results10.1007/s11340-008-9204-7 ↗