Evolution of microstructure and mechanical properties of Al 6061 alloy tube in cyclic rotating bending process
Source abstract
Abstract
Abstract To refine the microstructure and improve the mechanical properties of metal tubes, a new concept of severe plastic deformation process of cyclic rotating bending (CRB) was newly introduced. The current study focused on the investigation of evolution of microstructure and mechanical properties of Al 6061 tube in the CRB process with different deformation conditions. For this purpose, the CRB processes were performed with different deformation temperatures, bending angles and deformation times. The tensile test and Vickers hardness test were employed to evaluate the tensile properties and micro-hardness of the tube, respectively. While the Optical Microscope and Scanning Electronic Microscope equipped with Electron Back-Scattered Diffraction were utilized for the microstructure characterizations. The results shows that the deformation temperature, bending angle and deformation time have the strong influences on the mechanical properties and microstructure of the tubes processed by the CRB process. As a result, the tube with an average grain size of about 55 µm, as well as ultimate tensile strength of 244 MPa and total elongation of 10.05% was successfully obtained with the optimized deformation condition of the CRB process with a temperature of 100 °C, bending angle of 174°, the rotation speed of 20 r/min, and deformation time of 5 min, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Developing lightweight concepts in the automotive industry: taking on the environmental challenge with the SåNätt project10.1016/j.jclepro.2013.11.007 ↗
2. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel10.1126/science.1242578 ↗
3. General view of severe plastic deformation in solid state10.1016/j.matlet.2014.10.052 ↗
4. V.M. Segal, Minsk, Russia, 1974.
5. Mechanical properties of ultrafine grained steel produced by repetitive cold side extrusion10.1016/S0007-8506(07)61505-4 ↗
6. Rotary-die equal-channel angular pressing of an Al-7 mass% Si-0.35 mass% Mg alloy10.1016/S1359-6462(01)00985-X ↗
7. Effect of die parameters and material properties in ECAP with parallel channels10.1016/j.msea.2010.08.022 ↗
8. Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
9. Severe plastic deformation of metals by high-pressure tube twisting10.1016/j.scriptamat.2008.09.029 ↗
10. Kinematics of metal flow during twist extrusion investigated with a new experimental method10.1016/j.jmatprotec.2008.08.022 ↗
11. Grain refinement by severe deformation processing and super plastic characterization of AZ31 Magnesium alloy tubes10.9773/sosei.48.412 ↗
12. Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting10.1016/j.actamat.2012.04.035 ↗
13. Microstructure control during severe plastic deformation of Al-Cu-Li and the influence on strength and ductility10.1016/j.msea.2011.01.036 ↗
14. Microstructure control using severe plastic deformation10.1016/j.stam.2006.05.011 ↗
15. The use of severe plastic deformation for microstructural control10.1016/S0921-5093(01)01288-6 ↗
16. Microstructure and mechanical properties of an Al-Mg-Si tube processed by severe plastic deformation and subsequent annealing10.1016/j.msea.2015.05.099 ↗
17. Nucleation and microtexture development under dynamic recrystallization of copper10.1016/S0921-5093(01)01336-3 ↗
18. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle10.1016/j.scriptamat.2014.01.020 ↗
19. Influence of crystallographic orientation on cavitation erosion resistance of high interstitial CrMnCN austenitic stainless steels10.1016/j.triboint.2015.11.002 ↗
20. Relaxation of low-angle grain boundary structure by climb of the constituent dislocations10.1016/j.scriptamat.2015.11.016 ↗