journal article·2011-08

The reactive stabilization of Al–Zn foams using a powder metallurgy approach

M. Lafrance, M. Isac, F. Jalilian, K.E. Waters, R.A.L. Drew

Materials Science and Engineering: A· Volume 528· Issue 21
Publisher page

Abstract

Abstract The Al–Zn binary system was chosen in order to study the possibility of generating a reactive foam system within the semi-solid region. The idea is to create foam at lower temperatures than the melting point of pure aluminum using a transient liquid phase that softens the matrix prior to bulk expansion. This minimizes crack formation, collapse, drainage and deformation generated during processing. The Al–Zn foams were fabricated via the powder metallurgy route by hot compaction and subsequently foamed using TiH 2 as a blowing agent. The investigated systems consist of low, medium and high concentrations of Zn (10 wt%, 33 wt% and 50 wt%) in an Al based matrix containing 0.8 wt% TiH 2 . High temperature in situ confocal microscopy was used to study the formation of the transient liquid phase of the compacted elemental powders. As the percentage of Zn was increased, the liquidus temperature of the melt was lowered along with an increase in the volume of transient liquid phase. This reduces the mismatch between the hydrogen release temperature of the blowing agent and the liquidus temperature of the melt, thus increasing foaming stability. Reasonable foam structures near 300 vol% expansion and fair pore distributions were achieved at low concentrations of Zn (10 wt%) only above the alloy liquidus point. The mechanical compressive strength properties of the alloyed foam systems were also assessed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Pickering emulsions and particle stabilization · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Banhart · Progress in Materials Science · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
2. Kennedy · Powder Metallurgy · 2002 · 4510.1179/003258902225001579 ↗
3. Baumgärtner · Journal of Advanced Engineering Materials · 2000 · 2 · 16810.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O ↗
4. J. Baumeister, United States Patent Office, 5,151,246 (1992).
5. von_Zeppelin · Composites Science and Technology · 2003 · 63 · 229310.1016/S0266-3538(03)00262-8 ↗
6. Kennedy · Scripta Materialia · 2002 · 47 · 76310.1016/S1359-6462(02)00281-6 ↗
7. Baumgärtner · Advanced Engineering Materials · 2000 · 2 · 16810.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O ↗
8. Banhart · Applied Physics Letters · 2001 · 78 · 115210.1063/1.1350422 ↗
9. Helfen · Advanced Engineering Materials · 2002 · 4 · 80810.1002/1527-2648(20021014)4:10<808::AID-ADEM808>3.0.CO;2-U ↗
10. Lafrance · 2011
11. Thornton · Metallurgical Transactions A · 1975 · 6A
12. Handbook of cellular metals, WILEY-VCH, Weinheim, 2002
13. Gale · 2004
14. Lide · 1996
15. Schneider · Ztschr Elektrochemistry · 1941 · 47 · 527
16. Asavavisithchai · Advanced Engineering Materials · 2006 · 8
17. Asavavisithchai · Journal of Colloid and Interface Science · 2006 · 297 · 71510.1016/j.jcis.2005.11.046 ↗
18. Lumley · Metallurgical and Materials Transactions A · 1999 · 30A · 168210.1007/s11661-999-0108-7 ↗
19. Ashby · 2000