journal article·2008-05

Texture in Cu-based shape memory strips obtained by twin roll casting

C. Sobrero, R. Bolmaro, J. Malarría, P. Ochin, R. Portier

Publisher page

Abstract

Abstract Strips of Cu–13Al–5Ni–1Ti (wt.%) of about 400 μm thickness were obtained by twin-roll casting directly from the melt. Temperature-induced transformations under constant tensile load show a larger deformation, associated with the reversible martensitic transformation, for strips annealed at 700 °C and 900 °C than for the as-cast samples. This effect is partially ascribed to relaxation of internal stresses produced by the rapid solidification, some recovery of short-range disorder and microstructural changes related to Ti-rich X-phase precipitates. On the other hand, the strips show a columnar grain morphology and annealing leads to an increase of texture intensity related with the increase in elongation rate. Columnar grains are mostly aligned with the 〈 0 4 0 〉 R 18 / / 〈 1 0 0 〉 D O 3 directions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Solidification and crystal growth phenomena · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Babic · J. Phys. · 1970 · 3 · 1014
2. A.W. Cramb, in: E.F. Matthys, W.G. Truckner (Eds.), Proceedings of the Melt Spinning, Strip Casting and Slab Casting Symposium, Anaheim, California, USA, February 4–8, 1996. The Minerals, Metals and Materials Soc., Warrendale, PA, USA, 1996, p. 1.
3. Dalle · J. Phys. IV · 2001 · 11 · 46310.1051/jp4:2001877 ↗
4. Dalle · Mat. Sci. Eng. A · 2003 · 346 · 32010.1016/S0921-5093(02)00548-8 ↗
5. Goryczka · J. Mater. Proc. Tech. · 2005 · 162–163 · 17810.1016/j.jmatprotec.2005.02.029 ↗
6. Malarría · Mater. Sci. Eng. A · 2006 · 438–440 · 76310.1016/j.msea.2006.02.122 ↗
7. Inoue · Acta Mater. · 1996 · 44 · 482510.1016/S1359-6454(96)00120-6 ↗
8. Morawiec · Mater. Sci. Eng. A · 1999 · 273–275 · 70810.1016/S0921-5093(99)00401-3 ↗
9. Goryczka · Mater. Sci. Eng. A · 2004 · 378 · 24810.1016/j.msea.2003.11.068 ↗
10. Zhu · 1993 · 1083
11. Murty · J. Mater. Sci. · 1982 · 17 · 194510.1007/BF00540411 ↗
12. Adachi · Scripta Metall. · 1987 · 21 · 45310.1016/0036-9748(87)90179-7 ↗
13. Sakamoto · Trans. Jpn. Inst. Metall. · 1987 · 28 · 71510.2320/matertrans1960.28.715 ↗
14. Dutkiewietz · Mater. Sci. Eng. A · 1992 · 158 · 11910.1016/0921-5093(92)90142-N ↗
15. Lovey · Acta Metall. · 1994 · 42 · 45310.1016/0956-7151(94)90500-2 ↗
16. J. Malarría, P. Vermaut, P. Ochin, R. Portier, J. Mater. Proc. Technol., 2006, submitted for publication.
17. Bhattacharya · Acta Mater. · 1996 · 44 · 52910.1016/1359-6454(95)00198-0 ↗
18. Eucken · Mater. Sci. Forum · 1990 · 56–58 · 48710.4028/www.scientific.net/MSF.56-58.487 ↗
19. Recarte · Metall. Mater. Trans. A · 2002 · 33 · 258110.1007/s11661-002-0379-8 ↗