journal article·2004-10

Control of cooling during spray forming of bearing steel billets

Chengsong Cui, Udo Fritsching, Alwin Schulz, Klaus Bauckhage, Peter Mayr

Publisher page

Abstract

In an effort to minimize the distortion of bearing steel rings during the production process, 100Cr6 steel billets are spray formed with a unique cooling control system to control the cooling and solidification behavior of the deposits. Effects of heating around the deposits, gas cooling at the substrate bottom and the gas flow over the deposits are investigated both by numerical simulation and experiment. Porosity profiles and microstructures of spray formed bearing steel are examined and evaluated. The investigation results show that the thermal boundary conditions of the deposits play important roles on the cooling and solidification behavior of the deposits, especially at the deposit periphery. Porosity in the 100Cr6 bearing steel deposit can be reduced significantly with the special cooling control system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Materials Engineering and Processing · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Cook · Heat Treat. Met. · 1999 · 2 · 27
2. Hoffmann · Zeitschrift für Metallkunde · 2001 · 92 · 242
3. Leatham · Mater. World · 1996 · 4 · 317
4. Leatham · Int. J. Powder Metall. · 1993 · 29 · 321
5. Lawley · Mater. Sci. Forum · 1999 · 299-300 · 40710.4028/www.scientific.net/MSF.299-300.407 ↗
6. A. Lawley, Melt atomization & spray deposition—Quo Vadis, in: K. Bauckhage, V. Uhlenwinkel, U. Fritsching (Eds.), Spray Deposition and Melt Atomization (SDMA2000), vol. 1, Proceedings of the International Conference on Spray Deposition and Melt Atomization, University of Bremen, Bremen, Germany, 2000, pp. 3–15.
7. E.J. Lavernia, Y. Wu, Spray Atomization and Deposition, John Wiley and Sons Ltd., Chichester, UK, 1996.
8. C.S. Cui, O. Meyer, H. Zöller, U. Fritsching, A. Schulz, K. Bauckhage, P. Mayr, Production of homogeneous bearing steel billet by spray forming, in: V. Arnhold, C. Chu, W.F. Jandeska, Jr., H.I. Sanderow (Eds.), Advances in Powder Metallurgy & Particulate Materials-2002, Proceedings of the 2002 World Congress on Powder Metallurgy & Particulate Materials, Part 4, Metal Powder Industries Federation, Princeton, USA, 2002, pp. 201–217.
9. Meyer · Int. J. Thermal Sci. · 2003 · 42 · 15310.1016/S1290-0729(02)00015-7 ↗
10. T.P. Pederson, J.H. Hattel, N.H. Pryds, A.S. Pederson, M. Buchholz, V. Uhlenwinkel, A new integrated numerical model for spray atomization and deposition: comparison between numerical results and experiments, in: K. Bauckhage, V. Uhlenwinkel, U. Fritsching (Eds.), Spray Deposition and Melt Atomization, vol. 2, Proceedings of the International Conference on Spray Deposition and Melt Atomization (SDMA2000), University of Bremen, Bremen, Germany, 2000, pp. 813–824.
11. V. Uhlenwinkel, M. Buchholz, R. Tinscher, A. Schulz, J. Fischer, R. Schröder, Investigation of spray formed billets from bearing steel AISI 52100, in: A. Leatham (Eds.), Proceedings of the Fourth International Conference on Spray Forming, Baltimore, USA, 1999.