Temperature dependence of amplitude-dependent internal friction due to simultaneous breakaway of a dislocation from several pinning points
Source abstract
Abstract
Abstract The amplitude-dependent internal friction of very pure aluminum (99.9999%) and Al dilute alloys (20–100 ppm) has been measured at temperatures between 2 and 250 K. Two universal properties have been found in the temperature dependence of the required stress amplitude for a constant decrement. At relatively low temperatures (or high stress amplitude), the decrease of the stress with increasing temperature is proportional to T2/3 down to 65% of the stress for 0 K, and then deviates from the T2/3 dependence. It is explained that the elementary process is due to unpinning of a dislocation from a single solute atom. The interaction potential has been determined successfully from this region. At relatively high temperatures (or stress less than 40% of that for 0 K), we find for the first time that the stress changes as proportional to T−1 for all dilute Al alloys but for a pure Al crystal. It is explained that the elementary process is due to simultaneous unpinning of a dislocation from several solute atoms for dilute alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Fleischer · Acta. Metall. · 1961 · 9 · 99610.1016/0001-6160(61)90242-5 ↗
2. J. Friedel, Dislocations, Pergamon Press, Oxford, 1964, p. 360.10.1016/B978-0-08-013523-6.50011-9 ↗
3. N.F. Mott, Imperfections in Nearly Perfect Crystals, Wiley, New York, 1952, p. 173.
4. Labusch · Phys. Stat. Sol. · 1970 · 41 · 65910.1002/pssb.19700410221 ↗
5. H. Suzuki, in: P. Haasen, et al. (Eds.), Strength of Metals and Alloys (ICSMA-5), Pergamon Press, Oxford, 1980, p. 1595.
6. H. Suzuki, in: H.J. McQueen, et al. (Eds.), Strength of Metals and Alloys (ICSMA-7), Pergamon Press, Oxford, 1986, p. 1727.10.1016/B978-0-08-031640-6.50011-6 ↗
7. Kocks · Metall. Trans. · 1985 · 16A · 210910.1007/BF02670415 ↗
8. P. Haasen, in: W. Cahn, P. Haasen (Eds.), Physics of Metallurgy, Elsevier, Amsterdam, 1983, p. 1342.
9. H. Neuhauser, C. Schwink, in: H. Mughrabi (Ed.), Materials Science Technology, Vol. 6, VCH, Weinheim, 1993, p. 191.
10. R.W. Balluffi, A.V. Granato, in: F.R.N. Nabarro (Ed.), Dislocations in Solids, Vol. 4, North-Holland, 1979, p. 1.
11. T. Kosugi, in: H. Oikawa, et al. (Eds.), Strength of Materials (ICSMA-10), Jpn. Inst. Metals (JIM), 1994, p. 133.
12. Granato · J. Appl. Phys. · 1956 · 27 · 58310.1063/1.1722436 ↗
13. Granato · J. Appl. Phys. · 1981 · 52 · 713610.1063/1.328687 ↗
14. Kosugi · Mater. Sci. Eng. A · 1993 · 164 · 31610.1016/0921-5093(93)90685-8 ↗
15. Kosugi · J. Phys. Soc. Jpn. · 1984 · 53 · 383710.1143/JPSJ.53.3837 ↗
16. Kosugi · Jpn. J. Appl. Phys. · 1994 · 33 · 286210.1143/JJAP.33.2862 ↗
17. Teutonico · J. Appl. Phys. · 1964 · 35 · 22010.1063/1.1713074 ↗
18. Basinski · Scripta Metall. · 1972 · 6 · 80710.1016/0036-9748(72)90052-X ↗
19. Lebedev · Phys. Stat. Sol. (a) · 1989 · 116 · 64510.1002/pssa.2211160223 ↗
20. Lebedev · J. de Physique IV · 1996 · 6 · C8