Facile mechanical alloying of titanium sponge
Source abstract
Abstract
Abstract The mechanical alloying of titanium with 3 wt% chromium was performed starting directly from Hunter or Kroll titanium sponge. A small quantity of calcium was added as a process control agent (PCA) to obtain a high process yield, uniform microstructure and homogeneous chemical composition. The milled powder was then sintered using spark plasma sintering (SPS) at low temperature to achieve the best mechanical properties and a high-quality microstructure. Samples were also heat treated at high temperature to understand the behavior of the chlorine content of the titanium sponge. The mechanical properties were tested by three-point bending. Depending on the kind of starting titanium sponge, high transverse rupture strength (TRS) and high plastic deformation were obtained for all of the alloys in both the as-sintered and heat-treated condition: the high TRS was correlated to the total interstitial elements content. Tensile tests on samples obtained from Hunter titanium sponge yielded results comparable with those of wrought Ti6Al4V, and after high-temperature heat treatment, the samples obtained from the mechanical alloyed powders showed much better properties due to their much smaller grain size compared with that of Ti6Al4V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Boyer · 1994
2. Erhart · 1984
3. Froes · J. Miner. Met. Mater. Soc. · 2004 · 4610.1007/s11837-004-0252-x ↗
4. Peter · Key Eng. Mater. · 2012 · 520 · 110.4028/www.scientific.net/KEM.520.1 ↗
5. Hurless · AMPTIAC Q. · 2011 · 6 · 3
6. Froes · Adv. Mater. Processes · 2012 · 16
7. Froes · Adv. Mater. Processes · 2012 · 26
8. Lütjering · 2007
9. Fray · Int. Mater. Rev. · 2008 · 53 · 31710.1179/174328008X324594 ↗
10. Doblin · Key Eng. Mater. · 2012 · 520 · 9510.4028/www.scientific.net/KEM.520.95 ↗
11. Withers · Key Eng. Mater. · 2010 · 436 · 6110.4028/www.scientific.net/KEM.436.61 ↗
12. Bertolini · Key Eng. Mater. · 2010 · 436 · 7510.4028/www.scientific.net/KEM.436.75 ↗
13. Yamamoto · Key Eng. Mater. · 2010 · 436 · 10310.4028/www.scientific.net/KEM.436.103 ↗
14. Hartman · J. Miner. Met. Mater. Soc. · 1998 · 1610.1007/s11837-998-0408-1 ↗
15. Suryanarayana · Prog. Mater. Sci. · 2001 · 46 · 110.1016/S0079-6425(99)00010-9 ↗
16. Suryanarayana · Adv. Mater. · 1993 · 5 · 9610.1002/adma.19930050205 ↗
17. Bhosle · Mater. Sci. Eng. A · 2003 · 356 · 19010.1016/S0921-5093(03)00117-5 ↗
18. Ivasishin · Key Eng. Mater. · 2010 · 436 · 11310.4028/www.scientific.net/KEM.436.113 ↗
19. Wang · Key Eng. Mater. · 2010 · 436 · 15710.4028/www.scientific.net/KEM.436.157 ↗
20. Zak Fang · Key Eng. Mater. · 2012 · 520 · 1510.4028/www.scientific.net/KEM.520.15 ↗
21. Joshi · J. Mater. Eng. Perform. · 2013 · 22 · 99510.1007/s11665-012-0386-x ↗
22. Fan · J. Microsc. · 1997 · 185 · 15710.1046/j.1365-2818.1997.d01-622.x ↗
23. Huang · Acta Mater. · 2012 · 60 · 321510.1016/j.actamat.2012.02.035 ↗
24. Hanson · Int. J. Powder Metall. · 1990 · 26 · 157
25. Zadra · Mater. Sci. Eng. A · 2013 · 583 · 10510.1016/j.msea.2013.06.064 ↗
26. Liu · Mater. Manuf. Processes · 2010 · 25 · 73510.1080/10426910903365778 ↗
27. Yan · Scr. Mater. · 2012 · 67 · 49110.1016/j.scriptamat.2012.06.009 ↗
28. Liu · Key Eng. Mater. · 2012 · 520 · 4110.4028/www.scientific.net/KEM.520.41 ↗
29. Low · Metall. Mater. Trans. A · 2012 · 43 · 527110.1007/s11661-012-1328-9 ↗
30. Liu · J. Mater. Sci. Technol. · 2006 · 22 · 465
31. Yan · Scr. Mater. · 2013 · 68 · 6310.1016/j.scriptamat.2012.09.024 ↗
32. C. Siemers, F. Brunke, J. Laukart, M.S. Hussain, J. Rösler, K. Saksl, B. Zahra, Rare earths, in: Proceedings of the 51st Annual Conference of Metallurgist, Niagara Falls, Oct. 2012, pp. 281–292.
33. Yang · Mater. Sci. Eng. A · 2013 · 573 · 16610.1016/j.msea.2013.02.042 ↗
34. Lutterotti · J. Appl. Phys. · 1997 · 81 · 59410.1063/1.364220 ↗
35. Zadra · Powder Metall. · 2008 · 51 · 5910.1179/174329008X277000 ↗
36. D.M. Bowden, W.H. Peter, Near-net shape fabrication using low-cost titanium alloy powders, DOE Award Number DE-EE0003480.