journal article·2019-08

The mechanical anisotropy of directionally solidified Mg-4 wt.% Zn alloy under compression test

Hongmin Jia, Xiaohui Feng, Yuansheng Yang

Publisher page

Abstract

Abstract The mechanical anisotropy of directionally solidified Mg-4 wt.% Zn alloy was studied under compression test at room temperature. The results show that directionally solidified Mg-4 wt.% Zn has higher compression strength and work hardening rates when compression axis is parallel to the growth direction, which is mainly due to the formation of { 10 1 ‾ 2 } extension twins. Besides, the microstructural evolution in the process of plastic deformation was also investigated. When the compression axis is parallel to the growth direction, plastic deformation of the alloy starts with multi-slip systems and { 10 1 ‾ 2 } twins are activated as the strain increases. The interactions among the twins, matrix and dislocations result in the occurrence of sub-grains and the fragmentation of columnar grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Magnesium properties - applications - potential10.1016/S0921-5093(00)01351-4 ↗
2. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
3. Weight loss with magnesium alloys10.1126/science.1182848 ↗
4. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
5. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗
6. Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature10.1016/j.actamat.2006.06.043 ↗
7. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
8. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing10.1016/S1359-6454(03)00161-7 ↗
9. Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation10.1016/S0921-5093(04)00882-2 ↗
10. Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy10.1016/j.msea.2007.07.076 ↗
11. Microtexture evolution via deformation twinning and slip during compression of magnesium alloy AZ3110.1016/j.msea.2006.07.175 ↗
12. Tensile properties of directionally solidified AZ91 Mg alloy10.2320/matertrans.44.436 ↗
13. Effects of the growth rate on microstructures and room temperature mechanical properties of directionally solidified Mg-5.2Zn alloy
14. Microstructural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys10.1016/j.jallcom.2017.05.129 ↗
15. Microstructure evolution and mechanical properties of directionally solidified Mg- x Gd ( x =0.8, 1.5, and 2.5) alloys10.1016/j.msea.2016.03.065 ↗
16. Room-temperature tensile properties of a directionally solidified magnesium alloy and its deformation mechanism dominated by contraction twin and double twin10.1016/j.msea.2017.06.053 ↗
17. Microstructure of directionally solidified Mg-Zn alloy with different growth rates10.4028/www.scientific.net/MSF.816.411 ↗
18. Microstructure and corrosion resistance of directionally solidified Mg-2 wt.% Zn alloy10.1016/j.corsci.2017.02.023 ↗
19. Microstructure evolution and growth orientation of directionally solidified Mg–4 wt% Zn alloy with different growth rates10.1007/s40195-017-0630-3 ↗
20. Influence of solution treatment on microstructure, mechanical and corrosion properties of Mg-4Zn alloy10.1016/j.jma.2015.08.006 ↗
21. Effect of crystal orientation on corrosion behavior of directionally solidified Mg-4 wt% Zn alloy10.1016/j.jmst.2017.06.009 ↗
22. A constitutive model for hcp materials deforming by slip and twinning : application to magnesium alloy AZ31B10.1016/S0749-6419(03)00039-1 ↗
23. A taylor model based description of the proof stress of magnesium AZ31 during hot working10.1007/s11661-003-0146-5 ↗
24. Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium10.1016/j.msea.2013.07.003 ↗