journal article·2019-01Open access

Effect of Sm on thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses

F. Sıkan, S.E. Atabay, A. Motallebzadeh, S. Özerinç, I. Kalay, Y.E. Kalay

Abstract

Abstract The effect of rare-earth (Sm) microalloying on the thermal stability and phase selection along with the effect of nanocrystallization on the mechanical properties of amorphous melt-spun ribbons of Zr50Cu40Al10, Zr49Cu39.2Al9.8Sm2 and Zr48Cu38.4Al9.6Sm4 alloys were investigated using differential scanning calorimetry (DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), Vickers and nanoindentation hardness tests and micropillar compression analysis. XRD and TEM analyses showed that all samples were fully amorphous in as-spun state; however, crystallization sequences for the Sm-free and the Sm micro-alloyed samples were different during devitrification. Combined study of XRD, DSC and TEM on melt-spun ribbons show that Zr48Cu38.4Al9.6Sm4 have nanocrystallization of Cu2Sm phase with an average diameter of 10 nm, which was absent in Zr50Cu40Al10, prior to crystallization of Cu10Zr7 phase. The nanoindentation and micropillar compression tests revealed Cu2Sm nanocrystals embedded in Zr48Cu38.4Al9.6Sm4 alloy improves strength and hardness. On the other hand, presence of these nanocrystals deteriorate shear band stability and thus result in a catastrophic brittle fracture through a single shear band burst.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Non-crystalline structure in solidified gold-silicon alloys10.1038/187869b0 ↗
2. Glass forming properties of Zr-based bulk metallic alloys10.1016/S0022-3093(02)01876-8 ↗
3. Influence of Cr micro-addition on the glass forming ability and corrosion resistance of Cu-based bulk metallic glasses
4. Glass forming ability and crystallization of Zr-Cu-Ag-Al-Be bulk metallic glasses10.1016/j.jallcom.2011.02.107 ↗
5. Crystallization kinetics and phase transformation mechanisms in Cu56Zr44 glassy alloy10.1007/s11661-015-2921-5 ↗
6. High-accuracy X-ray diffraction analysis of phase evolution sequence during devitrification of Cu50Zr50 metallic glass10.1007/s11661-010-0531-9 ↗
7. Bulk metallic glasses10.1016/S0966-9795(03)00046-3 ↗
8. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
9. Bulk metallic glasses: at the cutting edge of metals research10.1557/mrs2007.121 ↗
10. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
11. Bulk metallic glass formation in binary Cu-rich alloy series - Cu100-xZrx ( x=34, 36, 38.2, 40 at%) and mechanical properties of bulk Cu64Zr36 glass10.1016/j.actamat.2004.02.009 ↗
12. Effect of cooling rate on the volume fraction of B2 phases in a CuZrAlCo metallic glass matrix composite10.1016/j.intermet.2013.03.017 ↗
13. Formation of Cu-Zr-Al bulk metallic glass composites with improved tensile properties10.1016/j.actamat.2011.01.029 ↗
14. Formation of CuZr-based bulk metallic glass composites containing nanometer-scale B2-CuZr phase through sub-Tg annealing10.1016/j.jallcom.2014.08.045 ↗
15. Bulk metallic glasses: smaller is softer
16. The mechanism of fracture in glassy materials capable of some inelastic deformation10.1016/0025-5416(76)90198-1 ↗
17. Stable fracture of a malleable Zr-based bulk metallic glass10.1063/1.4767327 ↗
18. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
19. Shear fracture and fragmentation mechanisms of bulk metallic glasses10.1080/09500830600949602 ↗
20. Mechanical behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass10.1016/j.intermet.2004.12.016 ↗
21. The effect of primary crystallizing phases on mechanical properties of Cu46Zr47Al7 bulk metallic glass composites10.1557/jmr.2006.0315 ↗
22. Work-Hardenable’” ductile bulk metallic glass
23. Phase formation and mechanical properties of Ti-Cu-Ni-Zr bulk metallic glass composites10.1016/j.actamat.2013.10.068 ↗
24. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗
25. Roles of minor rare-earth elements addition in formation and properties of Cu-Zr-Al bulk metallic glasses10.1016/j.jallcom.2015.01.036 ↗
26. Phase separation and improved plasticity by modulated heterogeneity in Cu-(Zr, Hf)-(Gd, Y)-Al metallic glasses10.1016/j.scriptamat.2007.03.008 ↗
27. Phase separation and enhancement of plasticity in Cu-Zr-Al-Y bulk metallic glasses10.1016/j.actamat.2005.12.020 ↗
28. Probing shear-band initiation in metallic glasses10.1103/PhysRevLett.107.185502 ↗
29. Thin film metallic glasses: unique properties and potential applications10.1016/j.tsf.2012.03.092 ↗
30. Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses10.1016/j.actamat.2015.05.028 ↗
31. Propagation dynamics of individual shear bands during inhomogeneous flow in a Zr-based bulk metallic glass10.1016/j.actamat.2011.01.060 ↗
32. Studies of shear band velocity using spatially and temporally resolved measurements of strain during quasistatic compression of a bulk metallic glass10.1016/j.actamat.2009.06.013 ↗
33. Strain burst speeds in metallic glass micropillars10.1016/j.intermet.2010.02.037 ↗
34. Temperature invariant flow stress during microcompression of a zirconium-based bulk metallic glass10.1016/j.scriptamat.2012.03.039 ↗
35. Nanocrystallization in Cu-Zr-Al-Sm bulk metallic glasses10.1007/s11661-018-4482-x ↗
36. On the hardness and elastic modulus of bulk metallic glass matrix composites10.1016/j.scriptamat.2010.06.010 ↗
37. Mechanically alloyed Zr55Al10Cu30Ni5 metallic glass composites containing nanocrystalline W particles
38. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
39. Critical cooling rate and thermal stability of Zr-Ti-Cu-Ni-Be alloys10.1063/1.1350624 ↗
40. The e/a factor governing the formation and stability of (Zr76Ni24)1-xAlx bulk metallic glasses10.1016/S1359-6462(03)00129-5 ↗
41. Composition optimization of the Al-Co-Zr bulk metallic glasses10.1016/j.scriptamat.2003.12.014 ↗
42. Local chemical and topological order in Al-Tb and its role in controlling nanocrystal formation10.1016/j.actamat.2011.11.008 ↗
43. Unified equation for the strength of bulk metallic glasses
44. Yield strength and yield strain of metallic glasses and their correlations with glass transition temperature10.1016/j.jallcom.2015.03.005 ↗
45. Effects of rare-earth elements on the glass-forming ability and mechanical properties of Cu46Zr47-xAl7Mx (M = Ce, Pr, Tb, and Gd) bulk metallic glasses10.1007/s12598-010-0147-7 ↗
46. Serrated flow of CuZr-based bulk metallic glasses probed by nanoindentation: role of the activation barrier, size and distribution of shear transformation zones10.1016/j.jnoncrysol.2017.01.015 ↗
47. Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments10.1557/JMR.1998.0185 ↗
48. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
49. Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy10.1016/j.scriptamat.2006.12.014 ↗
50. Indentation size effects in the nano- and micro-hardness of a Fe-based bulk metallic glass10.1016/j.physb.2014.05.057 ↗
51. High-strength materials produced by precipitation of icosahedral quasicrystals in bulk Zr – Ti – Cu – Ni – Al amorphous alloys10.1063/1.122980 ↗
52. Bulk and microscale compressive behavior of a Zr-based metallic glass10.1016/j.scriptamat.2008.01.009 ↗
53. Ductility of bulk nanocrystalline composites and metallic glasses at room temperature10.1063/1.126872 ↗
54. Role of nanometer-scale quasicrystals in improving the mechanical behavior of Ti- based bulk metallic glasses Role of nanometer-scale quasicrystals in improving the mechanical behavior of Ti-based bulk metallic glasses10.1063/1.1616198 ↗
55. Nanocrystallization and fracture characteristics in Co-based ribbons10.1016/j.jnoncrysol.2008.08.012 ↗
56. Evolution of the elastic modulus of Zr-Cu-Al BMGs during annealing treatment and crystallization: role of Zr/Cu ratio10.1016/j.jnoncrysol.2015.04.028 ↗
57. Ni-free Zr – Cu – Al – Nb – Pd bulk metallic glasses with different Zr / Cu ratios for biomedical applications10.1002/jbm.b.32715 ↗
58. A combinatorial thin film sputtering approach for synthesizing and characterizing ternary ZrCuAl metallic glasses10.1016/j.intermet.2007.02.011 ↗