journal article·2017-06

Effect of hydrogen on γ−phase transformation and texture evolution of a TiAl−based alloy deformed at elevated temperature

Daosheng Wen, Shuhui Huang, Bin Guo, Debin Shan, Yingying Zong

Publisher page

Abstract

Abstract The effect of hydrogen on γ-phase transformation and texture evolution of a Ti-46Al-2V-1Cr-0.3Ni (in at%) alloy was investigated during deformed in the temperature range of 1100–1200 °C with a strain rate of 0.01 s−1. Both the γ→α2 and α2→γlamella transformations occurred in the hydrogenated alloy, and the former was predominant, when it is deformed at 1150 °C/0.01 s−1. γ→α2 transformation occurred earlier than α2→γlamella. Hydrogen-induced such transformation was mainly associated with hydrogen−promoted dislocation movement and hydrogen−decreased stacking faults energy. A sharp −fiber texture was observed in the unhydrogenated alloy. That was significantly weakened in the hydrogenated alloy because of hydrogen−promoted lamellar decomposition and dynamic recrystallization. − and −fiber textures mainly associated with ∑3 and ∑27a which were increased by hydrogen can be only observed in the hydrogenated alloy. With increasing temperature, − and −fiber textures of the hydrogenated alloy was enhanced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Hydrogen Storage and Materials · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Microstructural evolution and mechanical properties of a forged gamma titanium aluminide alloy10.1016/0956-7151(92)90411-7 ↗
2. Gas phase aluminizing of TiAl intermetallics10.1016/j.intermet.2009.01.015 ↗
3. Deformation behaviour of γ+α2 Ti aluminide processed through reaction synthesis10.1016/j.msea.2012.08.016 ↗
4. Mechanical milling of Ti–Ni–Si filler metal for brazing TiAl intermetallics10.1016/j.intermet.2011.01.017 ↗
5. Deformation mechanisms in TiAl intermetallics−experiments and modeling10.1016/S0749-6419(01)00036-5 ↗
6. Textures of Materials (ICOTOM−11)
7. Micromechanical mechanism of texture formation in γ−TiAl10.1016/S0966-9795(01)00086-3 ↗
8. Effect of thermo hydrogen treatment on lattice defects and microstructure refinement of Ti6Al4V alloy10.1016/j.ijhydene.2010.03.109 ↗
9. Hydrogen effects on high temperature deformation characteristics of a cast Ti–14Al–19Nb–3V–2Mo alloy10.1016/S1359-6462(97)00265-0 ↗
10. Effect of hydrogen on hot deformation behaviors of TiAl alloys10.1016/j.ijhydene.2010.09.032 ↗
11. Effect of hydrogen on the microstructural evolution of a γ−TiAl based alloy10.1016/j.matlet.2014.11.139 ↗
12. Influence of heat treatments on the microstructure of a multi−phase titanium aluminide alloy10.3139/147.110142 ↗
13. Grain growth and β to α transformation behavior of a β−solidifying TiAl alloy10.1016/j.intermet.2013.09.010 ↗
14. Investigations of hydrogen–promoted α2−lamella decomposition of a γ−TiAl based alloy10.1016/j.matlet.2015.03.079 ↗
15. Lattice variations of Ti–6Al–4V alloy with hydrogen content10.1016/j.matchar.2011.04.019 ↗
16. Effect of 0.5 wt% hydrogen addition on microstructural evolution of Ti−6Al−4V alloy in the friction stir welding and post−weld dehydrogenation process10.1016/j.matchar.2011.07.016 ↗
17. Phase transformation mechanism involved in two−phase TiAl−based alloys10.1016/1359-6454(95)00167-4 ↗
18. An evidence of stress−induced α2 →γ transformation in a γ−TiAl−based alloy10.1016/0956-716X(95)00061-Y ↗
19. Effect of 0.3 wt%H addition on the high temperature deformation behaviors of Ti−6Al−4V alloy10.1016/j.ijhydene.2007.04.032 ↗
20. Microstructure and deformation of two−phase γ−titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
21. Microstructure evolution and mechanical properties of a novel beta γ−TiAl alloy10.1016/j.intermet.2012.07.012 ↗
22. Microstructure evolution, hot deformation behavior and mechanical properties of Ti−43Al−6Nb−1B alloy10.1016/j.intermet.2012.07.016 ↗
23. Microstructure of A γ−α2−β TiAl alloy containing iron and vanadium10.1016/0956-7151(93)90101-W ↗
24. Design of novel β−solidifying TiAl alloys with adjustable β/B2−phase fraction and excellent hot−workability10.1002/adem.200800164 ↗
25. Phase transformation and microstructure evolution of differently processed Ti–45Al–9Nb–Y alloy10.1016/j.intermet.2012.01.011 ↗
26. Influence of the deformation conditions on the texture evolution in γ−TiAl10.1016/S0921-5093(97)00556-X ↗
27. Deformation behavior and microstructural evolution of directionally solidified TiAlNb−based alloy during thermo−compression at 1373–1573 K10.1016/j.matdes.2015.06.117 ↗
28. Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl−based alloys10.1016/S1359-6454(00)00093-8 ↗
29. The effect of hydrogen on phase transformation and mechanical properties of a containing γ–TiAl based alloy10.1016/j.ijhydene.2014.08.051 ↗
30. Interfacial dislocations and deformation twinning in fully lamellar TiAl10.1016/S0921-5093(01)01661-6 ↗
31. Evolution of grain boundary and texture in as-forged Ti–45Al–9Nb–Y alloy during tensile test at different temperature10.1016/j.intermet.2012.01.011 ↗
32. Influence of the deformation conditions on the texture10.1016/S0921-5093(97)00556-X ↗
33. Effects of strain and annealing processes on the distribution of Σ3 boundaries in a Ni−based superalloy10.1016/j.scriptamat.2006.03.014 ↗