Numerical analysis on the local mechanical fields in polycrystalline 316LN stainless steel under cyclic fatigue loading: Comparison with experimental results
Source abstract
Abstract
The present paper is devoted to the study of the parameters responsible for the initiation and/or propagation of transgranular microcracks in polycrystalline materials. The investigation is carried out on an aggregate made of 316LN stainless steel which 3D grain shape and orientation were reconstructed using 2D serial Electron BackScattered Diffraction scans. The evaluation and the analysis of the local mechanical fields at the free surface of the polycrystalline aggregate subjected to cycling loading are performed using Finite Element Crystal Plasticity. Two crystal plasticity models are used and compared through Finite Element computations: quasi-physical or phenomenological models. The local parameters which possibly drive crack initiation are analysed and then compared to the experimental observations. A new criterion predicting whether a specific grain is likely to present a fatigue crack initiation is finally proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. The behaviour of short fatigue cracks and their initiation. Part II–A general summary10.1111/j.1460-2695.1987.tb01153.x ↗
2. The structure of slip band extrusion revealed by transmission electron microscopy10.1016/0001-6160(60)90181-4 ↗
3. A model of extrusions and intrusions in fatigued metals: I. Point-defect production and the growth of extrusions10.1080/01418618108239541 ↗
4. Overview of fatigue behavior in copper single crystals: I. Surface morphology and stage I crack initiation sites for tests at constant strain amplitude10.1016/0001-6160(89)90217-4 ↗
5. Analysis of activated slip systems in fatigued nickel polycrystals using the EBSD-technique in the scanning electron microscope10.1016/0921-5093(95)10076-8 ↗
6. J. Man, K. Obrtlik, P.J., Extrusions and intrusions in fatigued metals. Part 1. State of the art and history, Philos. Mag. 16, 2009, pp. 1295–1336.10.1080/14786430902917616 ↗
7. The role of microstructural dissimilitude in fatigue and fracture of small cracks10.1016/0001-6160(88)90038-7 ↗
8. Influence of the crystalline texture on the fatigue behavior of a 316l austenitic stainless steel10.1016/S0921-5093(00)00804-2 ↗
9. Influence of the crystalline orientations on microcrack initiation in low-cycle fatigue10.1016/j.msea.2013.02.046 ↗
10. Influence of local crystallographic configuration on microcrack initiation in fatigued 316LN stainless steel: experiments and crystal plasticity finite elements simulations10.1016/j.msea.2015.09.119 ↗
11. Micromechanic analysis of fatigue band crossing grain boundary10.1016/S0921-5093(97)00692-8 ↗
12. Analysis of crack tip plasticity for microstructurally small cracks using crystal plasticity theory10.1016/S0013-7944(02)00204-7 ↗
13. Crack tip displacements of microstructurally small cracks in single phase ductile polycrystals10.1016/S0013-7944(02)00033-4 ↗
14. Investigation of the effect of grain clusters on fatigue crack initiation in polycrystals10.1016/j.ijfatigue.2010.04.003 ↗
15. Intergranular and intragranular behavior of polycrystalline aggregates. Part I: FE model10.1016/S0749-6419(00)00061-9 ↗
16. Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN10010.1016/j.ijplas.2009.08.001 ↗
17. Numerical investigations of the free surface effect in three-dimensional polycrystalline aggregates10.1016/j.commatsci.2012.11.052 ↗
18. Experimental and computational studies for low cycle fatigue crack nucleation in a polycrystal10.1016/j.ijplas.2006.07.001 ↗
19. Simulation of slip band evolution in duplex Ti-6Al-4V10.1016/j.actamat.2009.10.025 ↗
20. Single crystal modeling for structural calculations. Part 2: finite element implementation10.1115/1.2903375 ↗
21. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
22. C. Teodosiu, J.-L. Raphanel, L. Tabourot, Finite element simulation of the large elastoplastic deformation of multicrystals, in: Proceedings of the 5th MECAMAT International Seminar on Large Plastic Deformations: Fundamental Aspects and Applications to Metal Forming, MECAMAT, Fontainebleau, France, 1993, pp. 153–168.10.1201/9780203749173-16 ↗
23. A framework for automated analysis and simulation of 3D polycrystalline microstructures. Part I: statistical characterization10.1016/j.actamat.2007.11.041 ↗
24. Groeber · 2011 · 53
25. Uchic · 2011 · 31
26. M. Mineur, Conditions locales d′amorçage des fissures de fatigue dans un acier inoxydable de type 316L: aspects cristallographiques (EBSD) (Ph.D. thesis), École Nationale Supérieure de Mécanique et d′Aérotechnique, 2000.
27. Effet de l'anisotropie élastique cristalline sur la distribution des facteurs de Schmid à la surface des polycristaux10.1016/j.crme.2006.03.004 ↗
28. The elastic constants of crystals10.1016/S0081-1947(08)60553-6 ↗
29. Besson · 2009
30. The concepts o,f latent hardening and strain hardening in metallic single crystals10.1016/0001-6160(85)90154-3 ↗
31. Slip systems interactions in α-iron determined by dislocation dynamics simulations10.1016/j.ijplas.2007.12.009 ↗
32. G. Monnet, A crystalline plasticity law for austenitic stainless steels, Tech. Rep. H-B60-2008-04690-EN, EDF R&D, 2009.
33. C. Gérard, Mesures de champs et identification de modèles de plasticité cristalline (Ph.D. thesis), Université Paris XIII, 2008.
34. Hardening description for FCC materials under complex loading paths10.1016/j.commatsci.2008.08.027 ↗
35. Y. Guilhem, Etude numérique des champs mécaniques locaux dans les agrégats polycristallins d'acier 316l sous chargement de fatigue (Ph.D. thesis), Ecole des Mines de Paris, ParisTech, 2011.
36. Abaqus user’s manual, RI: Hibbitt, Karlsson & Sorensen, INC, version 6.11, 2011.
37. Fatigue crack initiation modeling of 316LN steel based on non local plasticity theory10.1016/j.proeng.2010.03.147 ↗
38. Influence of the crystalline orientations on microcrack initiation in low-cycle fatigue10.1016/j.msea.2013.02.046 ↗
39. Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel10.1016/S0921-5093(00)00804-2 ↗
40. The cleavage strength of polycrystals
41. Atomic force microscopy of surface relief in individual grains of fatigued 316L austenitic stainless steel10.1016/S1359-6454(02)00167-2 ↗
42. Y. Guilhem, S. Basseville, H. Proudhon, G. Cailletaud, Effects of surface roughness on plastic strain localization in polycrystalline aggregates, in: Proceedings of the 2nd International Symposium on Fatigue Design & Material Defects (FDMD II), Paris, France, 2014, paper no 06009.10.1051/matecconf/20141206009 ↗