journal article·2017-05

Microstructure and mechanical properties of two Z-phase strengthened 12%Cr martensitic steels: the effects of Cu and C

Masoud Rashidi, Lennart Johansson, Hans-Olof Andrén, Fang Liu

Publisher page

Abstract

Z-phase strengthened 12% Cr steels are designed to combine good corrosion and creep resistance for applications in fossil fuel power plants with steam temperatures up to 650 °C. Two trial Z-phase strengthened steels were investigated, Z-steel with ultra-low C content, and ZCuC-steel with relatively high C content and Cu addition. The Z-steel has better creep strength; however, the alloy has low impact toughness due to the formation of continuous Laves-phase films at grain boundaries. Atom probe tomography, transmission electron microscopy, and scanning electron microscopy were employed to study the effects of C and Cu on the microstructure of the two steels in the as-tempered condition, and after ageing for different times. The Z-steel shows a fast transformation from TaN to Z-phase. The relatively high C content in the ZCuC-steel resulted in the formation of two categories of MX: Ta(C, N) and TaN. The phase transformation from Ta(C, N) to Z-phase is slower compared to that from TaN to Z-phase. In addition, precipitation of M23C6 and Cu particles in the ZCuC-steel led to easier nucleation of Laves-phase, and hence a much improved toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. J.G.J. Olivier, G. Janssens-Maenhout, M. Muntean, J.A.H.W. Peters, Trends in global CO2 emissions: 2016 report, 2016.
2. Development of creep-resistant steels and alloys for use in power plants10.1533/9780857097552.2.250 ↗
3. Microstructure and long-term creep properties of 9-12% Cr steels10.1016/j.ijpvp.2007.06.010 ↗
4. Coarsening of precipitates and degradation of creep resistance in tempered martensite steels10.1016/j.msea.2008.04.088 ↗
5. Influence of Z-phase on Long-term creep stability of martensitic 9 to 12% Cr steels
6. A new 12% chromium steel strengthened by Z-phase precipitates10.1016/j.scriptamat.2015.10.030 ↗
7. Tantalum-containing Z-phase in 12% Cr martensitic steels10.1016/j.scriptamat.2009.01.025 ↗
8. Initial study on Z-phase strengthened 9-12% Cr steels by atom probe tomography
9. First-principles investigation of the stability of MN and CrMN precipitates under coherency strains in α-Fe (M=V, Nb, Ta)10.1063/1.3573392 ↗
10. Conversion of MX nitrides to Z-phase in a martensitic 12% Cr steel10.1016/j.actamat.2009.09.045 ↗
11. A thermodynamic model of the Z-phase Cr(V, Nb)N10.1016/j.calphad.2007.04.001 ↗
12. Relationship between Laves phase and the impact brittleness of P92 steel reevaluated10.1016/j.msea.2015.05.012 ↗
13. Causes of breakdown of creep strength in 9Cr-1.8W-0.5Mo-VNb steel10.1016/j.msea.2006.05.010 ↗
14. Design of martensitic/ferritic heat-resistant steels for application at 650°C with supporting thermodynamic modelling10.1016/j.msea.2007.05.047 ↗
15. Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep10.1016/j.matchar.2012.08.009 ↗
16. Formation of delta ferrite in 9 wt% Cr steel investigated by in-situ X-ray diffraction using synchrotron radiation10.1007/s11661-010-0371-7 ↗
17. Kinetics of Z-phase precipitation in 9 to 12 pct Cr steels10.1007/s11661-012-1583-9 ↗
18. M.K. Miller, R.G. Forbes, The art of specimen preparation, in Atom-Probe Tomography: The Local Electrode Atom Probe, Springer US, 2014, pp. 189–225.10.1007/978-1-4899-7430-3_4 ↗
19. Effects of laser pulsing on analysis of steels by atom probe tomography10.1016/j.ultramic.2010.12.012 ↗
20. Grain size measurement by the intercept method10.1016/0026-0800(71)90005-X ↗
21. M. Rashid, H.-O. Andrén, and F. Liu, Core-shell structure of intermediate precipitates in a Nb-based Z-phase strengthened 12% Cr steel, Microsc. Microanal., no. APT&M2016, Special Issue, In press.10.1017/S1431927617000174 ↗
22. Microstructural development during ageing of an 11% chromium steel alloyed with copper10.1016/S0921-5093(01)01304-1 ↗
23. Effect of boron on microstructure and creep strength of advanced ferritic power plant steels10.1016/j.proeng.2011.04.018 ↗
24. On the nucleation of Mo-rich Laves phase particles adjacent to M23C6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels10.1016/j.actamat.2015.01.027 ↗
25. On the effect of long-term creep on the microstructure of a 12% chromium tempered martensite ferritic steel10.1016/j.actamat.2009.07.010 ↗
26. Effect of Boron on Carbide Coarsening at 873K (600°C) in 9 to 12 pct Chromium Steels10.1007/s11661-012-1205-6 ↗
27. BN type inclusions formed in high Cr ferritic heat resistant steel10.1179/174892406X160624 ↗