journal article·2017-04

Microstructure and mechanical properties of ZrO 2 particle dispersion strengthened 16MnV steel

B.A. Wang, N. Wang, Y.J. Yang, H. Zhong, M.Z. Ma, X.Y. Zhang, R.P. Liu

Publisher page

Abstract

Abstract The dispersion strengthened 16MnV steels with 0.5 wt% and 1.2 wt% ZrO 2 particles were prepared using medium frequency induction melting furnace. The ZrO 2 particles mixed with iron powder were added into the 16MnV steel through cored-wire injection process. Optical metallographic microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to observe and analyze the microstructure, fracture morphology, dislocation configuration and strengthening mechanism of ZrO 2 particle dispersion strengthened 16MnV steel under as-cast, normalizing and quenching states. Results showed that the strength of 16MnV steel under various states increased significantly after the addition of dispersed ZrO 2 particles. Analysis indicates that the dislocation cell formed by high density dislocation around ZrO 2 particles and attractive interaction between those particles are the main strengthening mechanism of dispersion strengthened 16MnV steel. The tensile test results showed that remarkable strengthening effect of ZrO 2 particle on 16MnV steel has been observed. As the addition of 1.2 wt% ZrO 2 , the improvement of strength in ZrO 2 /16MnV is approximately 37.69% for as-casting, 24.2% after normalization and 29.96% after quenching, respectively. The normalized ZrO 2 /16MnV with 1.2 wt% ZrO 2 has the highest strength of 1453 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. The formation and evolution of oxide particles in oxide-dispersion-strengthened ferritic steels during processing10.1016/j.actamat.2012.12.042 ↗
2. Effects of titanium concentration and tungsten addition on the nano-mesoscopic structure of high-Cr oxide dispersion strengthened (ODS) ferritic steels10.1016/j.jnucmat.2013.04.090 ↗
3. The microstructure and mechanical properties of micro-scale Y2O3 strengthened 9Cr steel fabricated by vacuum casting10.1016/j.matdes.2014.10.075 ↗
4. Sintered aluminum with high strength at elevated temperatures
5. Effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion strengthened steel10.1016/j.jnucmat.2015.01.032 ↗
6. Feasibility of using Y2Ti2O7 nanoparticles to fabricate high strength oxide dispersion strengthened Fe-Cr-Al steels10.1016/j.matdes.2015.08.118 ↗
7. The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel10.1016/j.matchar.2015.01.015 ↗
8. Microstructure characterization and tensile properties of 18Cre4Al-oxide dispersion strengthened ferritic steel10.1016/j.jallcom.2015.06.248 ↗
9. The science and technology of mechanical alloying10.1016/S0921-5093(00)01465-9 ↗
10. Modelling of particle strengthening in the γ΄ and oxide dispersion strengthened nickel-base superalloy PM303010.1016/j.msea.2004.01.109 ↗
11. XAFS and TEM studies of the structural evolution of yttrium-enriched oxides in nanostructured ferritic alloys fabricated by a powder metallurgy process10.1016/j.matchemphys.2012.08.038 ↗
12. Oxide dispersion strengthened ferritic steel fabricated by mechanical alloying and spark plasma sintering10.1179/1743290113Y.0000000073 ↗
13. Effect of hydrogen ion/electron dual-beam irradiation on microstructural damage of a 12Cr-ODS ferrite steel10.1016/j.jnucmat.2009.10.014 ↗
14. Optimization of the processing parameters during internal oxidation of Cu–Al alloy powders using an artificial neural network10.1016/j.matdes.2004.06.002 ↗
15. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application10.1364/OE.21.011448 ↗
16. Nitrogen doping in cuprous oxide films synthesized by radical oxidation at low temperature10.1016/j.matlet.2012.10.083 ↗
17. Microstructural stability of ODS steels in cyclic loading10.1111/ffe.12284 ↗
18. Macroscopic and microscopic determinations of residual stresses in thin Oxide Dispersion Strengthened steel tubes
19. Microstructural changes upon annealing in ODS-strengthened ultrafine grained ferritic steel10.1007/s10853-013-7255-3 ↗
20. Assessment of a new fabrication route for Fe–9Cr–1W ODS cladding tubes10.1016/j.jnucmat.2011.12.013 ↗
21. Optimization of the chemical composition and manufacturing route for ODS RAF steels for fusion reactor application10.1088/0029-5515/49/5/055003 ↗
22. Austenitic Oxide Dispersion Strengthened Steels: a Review10.14429/dsj.66.10205 ↗
23. Factors affecting the mechanical properties of ultra-high-strength bainitic steel containing W and 0.33 mass % C10.1016/S1006-706X(16)30047-4 ↗
24. Effect of nano-sized TiC particle addition on microstructure and mechanical properties of SA-106B carbon steel10.1016/j.msea.2015.07.026 ↗
25. Herlach · 2004 · 138
26. Study of the deformation and damage mechanisms of a 9Cr-ODS steel: microstructure evolution and fracture characteristics10.1016/j.msea.2016.01.109 ↗