Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure
Source abstract
Abstract
Abstract The aim of this study is to model the mechanical behavior of ultra-thin sheets of stainless steel taking into account the heterogeneous distribution of the mechanical properties of the grains. EBSD analysis and micro-hardness measurements are performed to characterize the grain size and shape as well as the local hardness distribution. A finite element model of a representative volume, based on the grain size distribution and Vorono polyhedrons, is developed using the dedicated free software Neper and the material inhomogeneity is introduced via a discrete distribution of the flow stress of the grains. Four different flow stress distributions are considered, by changing either the flow stress range or the corresponding volume fractions. A uniaxial tensile test of the representative volume is simulated and compared to experimental data. Then, the influence of the grain heterogeneity on the hysteresis of loading-unloading sequences in tension and on the Bauschinger effect in simple shear is investigated numerically and compared with experiments. In particular, it is shown that the type of the flow stress distribution influences significantly the magnitude of the Bauschinger effect. Finally, the surface roughness is characterized numerically both in tension and simple shear and is shown to reproduce faithfully the experimental values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets
2. Intergranular and intragranular behavior of polycrystalline aggregates. part 1: F.E. model10.1016/S0749-6419(00)00061-9 ↗
3. Intergranular and intragranular behavior of polycrystalline aggregates. part 2: Results10.1016/S0749-6419(00)00062-0 ↗
4. A numerical modelling of 3d polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity10.1016/j.ijplas.2010.09.008 ↗
5. Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models10.1016/0749-6419(93)90054-T ↗
6. Effects of strain localization on surface roughening during sheet forming10.1016/S1359-6454(97)00182-1 ↗
7. Grain-scale micromechanics of polycrystal surfaces during plastic straining
8. Experimental and simulation based study on micro-scaled sheet metal deformation behavior in microembossing process10.1016/j.msea.2012.06.058 ↗
9. The size effect on micro deformation behaviour in micro-scale plastic deformation10.1016/j.matdes.2010.06.011 ↗
10. Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper10.1016/j.msea.2010.07.009 ↗
11. The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of dp980 steel during uniaxial tension10.1016/j.ijplas.2012.11.013 ↗
12. Inelastic effects on springback in metals10.1016/S0749-6419(01)00054-7 ↗
13. Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries10.1016/j.ijplas.2004.05.017 ↗
14. Mechanical properties and bending behaviour of metal foils10.1243/09544054JEM838 ↗
15. C. Déprés, C. Manole, P. Balland, F. Degré, L. Tabourot, V. Pouzols, Plasticity of cristalline materials: from dislocations to continuum, Wiley-ISTE, Ch. 3. 2011.
16. Geometry and grain size effects on the fracture behavior of sheet metal in micro-scale plastic deformation10.1016/j.matdes.2011.06.039 ↗
17. Constitutive modeling of free surface roughening in sheet metal considering mesoscopic inhomogeneity based on hardness distribution10.1299/jmmp.3.1285 ↗
18. Prediction of free surface roughening by 2d and 3d model considering material inhomogeneity10.1299/jmmp.5.978 ↗
19. Constitutive modeling of free surface roughening in sheet metal considering microscopic inhomogeneity based on hardness distribution10.1299/jmmp.3.1285 ↗
20. Prediction of surface roughening and necking behavior for metal foils by inhomogeneous FE material modeling10.4028/www.scientific.net/KEM.554-557.169 ↗
21. Glaeser · 2010
22. Microhardness and microstructure of austenite and ferrite in nitrogen alloyed duplex steels between 20 and 500°C10.1016/S0921-5093(98)00839-9 ↗
23. Necking behavior of aa 6022-t4 based on the crystal plasticity and damage models10.1016/j.ijplas.2015.06.013 ↗
24. The ‘size effect’ on the stress-strain, fatigue and fracture properties of thin metallic foils10.1016/S0921-5093(01)01043-7 ↗
25. Material behavior modelling in micro/meso-scale forming process with considering size/scale effects10.1016/j.commatsci.2008.02.017 ↗
26. Polycrystalline numerical simulation of variable amplitude loading effects on cyclic plasticity and microcrack initiation in austenitic steel 304l10.1016/j.ijfatigue.2011.07.003 ↗
27. Influence of size effect on the springback of sheet metal foils in micro-bending10.1016/j.commatsci.2011.04.002 ↗
28. Modelling of size effects in microforming process with consideration of grained heterogeneity10.1016/j.commatsci.2013.03.033 ↗
29. Investigation of size effects on material behavior of thin sheet metals using hydraulic bulge testing at micro/meso-scales10.1016/j.ijmachtools.2008.01.006 ↗
30. Size effect on deformation behavior and ductile fracture in microforming of pure copper sheets considering free surface roughening10.1016/j.matdes.2015.06.067 ↗
31. A model for the effect of grain size on the yield stress of metals
32. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
33. Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models10.1016/j.ijplas.2006.06.002 ↗
34. J. Nohava, P. Hausild, N.X. Randall, G. Favaro1, Grid nanoindentation on multiphase materials for mapping the mechanical properties of complex microstructures, in: Metrology in Modern Context. Pattaya, Chonburi, Thailand, November 2010.
35. Delta ferrite formation in austenitic stainless steel castings
36. Effects of microstructure on the variation of the unloading behavior of DP780 steels10.1007/s11665-015-1671-2 ↗
37. Mechanical properties involved in the micro-forming of ultra-thin stainless steel sheets10.1007/s11661-015-2978-1 ↗
38. In-situ observation of bulk 3d grain evolution during plastic deformation in polycrystalline cu10.1016/j.ijplas.2014.10.013 ↗
39. Large-scale 3D random polycrystals for the finite element method: generation, meshing and remeshing10.1016/j.cma.2011.01.002 ↗
40. Concepts for integrating plastic anisotropy into metal forming simulations10.1002/1527-2648(200204)4:4<169::AID-ADEM169>3.0.CO;2-G ↗
41. Surface micromechanics of polymer coated aluminium sheets during plastic deformation10.1002/1527-2648(20021105)4:11<859::AID-ADEM859>3.0.CO;2-0 ↗
42. Numerical analyses of surface roughness during bending of fcc single crystals and polycrystals10.1016/j.ijplas.2013.01.016 ↗
43. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
44. Experimental investigation of plastic grain interaction10.1016/S0921-5093(01)01974-8 ↗
45. Guide to etching specialty alloy
46. Observation of microscopic plastic deformation of polycrystalline aluminum during uniaxial tension by confocal laser-scanning microscope
47. Influence of specimen width on the deformation and fracture behaviour of AA5182 sheets10.1016/j.engfracmech.2013.07.007 ↗
48. Complex unloading behavior: nature of the deformation and its consistent constitutive representation10.1016/j.ijplas.2010.12.003 ↗
49. Compartmentalized model for the mechanical behavior of titanium10.4028/www.scientific.net/KEM.504-506.673 ↗
50. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
51. Fracture and the formation of sigma phase, M23C6 and austenite from delta-ferrite in an AISI stainless steel10.1007/BF02652290 ↗
52. Evolution of matt surface topography in aluminium pack rolling. part I: model development10.1016/j.ijmecsci.2004.07.004 ↗
53. Evolution of matt surface topography in aluminium pack rolling. part II: effect of material properties10.1016/j.ijmecsci.2004.07.005 ↗
54. Studies of grain boundary regions in deformed polycrystalline aluminum using spherical nanoindentation10.1016/j.ijplas.2016.01.001 ↗
55. Advanced issues in springback10.1016/j.ijplas.2012.08.006 ↗
56. Effect of grain anisotropy on limit strains in biaxial stretching: part I. Influence of sheet thickness and grain size in weakly textured sheets10.1007/BF02643565 ↗
57. On the evolution of surface roughness during deformation of polycrystalline aluminum alloys10.1016/j.actamat.2005.05.007 ↗
58. Specimen dimension and grain size effects on deformation behavior in micro tensile of SUS304 stainless steel foil10.2320/matertrans.M2013016 ↗
59. Evaluation of change in material properties due to plastic deformation10.1016/j.jmatprotec.2004.04.114 ↗
60. Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain10.1016/S0749-6419(01)00049-3 ↗
61. Effects of grain-scale heterogeneity on surface roughness and sheet metal necking10.1016/j.ijmecsci.2014.03.018 ↗
62. Surface roughness evolution under constant amplitude fatigue loading using crystal plasticity10.1016/j.engfracmech.2004.06.001 ↗
63. A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations10.1016/j.ijplas.2016.01.002 ↗
64. Experimental and numerical studies of coupling size effects on material behaviors of polycrystalline metallic foils in microscale plastic deformation10.1016/j.msea.2016.01.116 ↗
65. Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal10.1016/j.ijplas.2008.01.002 ↗