journal article·2016-07

Estimation of the elastic modulus of the alumina coated AA1050 aluminum: Modeling and experiments

Amir Bahri, Noamen Guermazi, Mansour Bargui, Khaled Elleuch

Publisher page

Abstract

Abstract This paper deals with the prediction of the elastic modulus of alumina coating deposited on an aluminum substrate. Three- and four-point bending tests were used for the mechanical characterization. Three configurations were retained: a sandwich model, a model with coating subjected to tensile and model with coating placed in the state of compression. For the prediction of the elastic modulus of anodic oxide layer, an inverse method based on a numerical/experimental comparison was used. From the main results, it was found that: Finite element (FE) simulations of three- and four-point bending tests have been successfully conducted. In particular, both numerical 2D and 3D models were considered to be compared with the experimental results. The predicted elastic modulus was found to largely depend on the coating thickness. The elastic modulus was found to be around 15 GPa for a thickness of 20–50 µm and 20 GPa for an alumina coating of 80 µm. The numerical/experimental correlation allowed to conclude that when the alumina coating was subjected to compression it was more resistant than in tensile.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Concrete Corrosion and Durability · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. The effect of sulphuric anodisation of aluminium alloys on contact problems10.1016/j.surfcoat.2005.01.105 ↗
2. Aluminium foams for transport industry10.1016/S0261-3069(97)00050-2 ↗
3. The effect of core thickness on the flexural behaviour of aluminium foam sandwich structures10.1016/j.compstruct.2006.07.002 ↗
4. Bending fatigue characteristics of nanohoneycomb structures10.1016/j.compstruct.2006.11.007 ↗
5. Mechanical failure of anodic films on Aluminum and Tantalum10.1149/1.2132714 ↗
6. On the growth of highly ordered pores in anodized Aluminum Oxide10.1021/cm980163a ↗
7. Optimization of mechanical and chemical properties of sulfuric anodized aluminum using statistical experimental methods10.1016/j.matchemphys.2007.09.043 ↗
8. Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film10.1016/j.surfcoat.2007.01.044 ↗
9. Failure of sandwich beams consisting of alumina face sheet and aluminum foam core in bending10.1016/j.msea.2005.06.070 ↗
10. Studies on the structure of anodic oxide films on Aluminum10.1149/1.2425726 ↗
11. Plastic deformation of nanometric single crystal silicon wire in AFM bending test at intermediate temperatures10.1109/84.993447 ↗
12. Evaluation of size effect on mechanical properties of single crystal Silicon by nanoscale bending test using AFM10.1109/84.896765 ↗
13. Development of AFM-based techniques to measure mechanical properties of nanoscale structures10.1016/S0924-4247(02)00268-6 ↗
14. Mechanical property measurements of nanoscale structures using an atomic force microscope10.1016/S0304-3991(02)00089-X ↗
15. Young's modulus measurements of silicon nanostructures using a scanning probe system: a non-destructive evaluation approach10.1088/0964-1726/12/6/023 ↗
16. Quasi-static bending test of nano-scale SiO2 wire at intermediate temperatures using AFM-based technique10.1016/S0924-4247(02)00431-4 ↗
17. Mechanical properties and adhesion strength of TiN and Al coatings on HSS, steel, aluminium and copper characterized by four testing Methods10.1016/0040-6090(95)06931-3 ↗
18. Toughening of nanoporous glasses using porogen residuals10.1038/nmat1153 ↗
19. Mechanical properties of metal oxide films10.1149/1.2412286 ↗
20. The determination of the delamination resistance in thermal barrier coating system by four-point bending tests10.1016/j.surfcoat.2005.12.023 ↗
21. Molecular dynamics simulations of four-point bending tests on SiC nanowires10.1016/j.scriptamat.2008.05.044 ↗
22. Study of interfacial adhesion energy of multilayered ULSI thin film structures using four-point bending test10.1016/j.surfcoat.2004.10.036 ↗
23. Mechanical failure of anodized aluminum under three and four-point bending tests10.1016/j.matdes.2013.03.087 ↗
24. Hertzian-Crack suppression in ceramics with elastic-modulus-graded surfaces10.1111/j.1151-2916.1998.tb02625.x ↗
25. Mechanical failure of anodized films of aluminum in bending10.1016/j.matdes.2008.11.023 ↗
26. Young's modulus measurements of nanohoneycomb structures by flexure testing in atomic force microscopy10.1016/j.compstruct.2006.02.023 ↗
27. Thick and dense anodic oxide layers formed in aluminum in sulfuric acid bath10.1016/S1005-0302(10)60018-7 ↗
28. comparative study of mechanical and tribological properties of alumina coatings formed on Aluminum in various conditions10.1016/j.matdes.2009.02.005 ↗
29. Jun Fujiwara, Taku Nakajima, Makoto Ohsaki, and Fumiyoshi Takeda, Shape Optimization of clamping members of frame-supported membrane structures under stress constraints, in: Proceedings of the 6th China–Japan–Korea Joint Symposium on Optimization of Structural and Mechanical Systems, 2010, pp. 22–25.
30. Determination of Anodized aluminum material characteristics by means of nanoindentation measurements
31. Cracking and decohesion of a thin Al2O3 film on a ductile Al–5% Mg substrate10.1016/j.actamat.2004.10.005 ↗
32. C. Dukhyun, J. Jihoon, L. Pyungsoo, H. Woonbong, L. Kunhong, Hyunchul Park. Young's Modulus Measurements of nanohoneycomb Structures by Flexural testing in Atomic
33. An analysis of decohesion along an imperfect interface10.1007/BF00018611 ↗
34. Black anodic coatings for space applications: study of the process parameters, characteristics and mechanical properties10.1016/j.jmatprotec.2009.02.013 ↗
35. The plastic collapse of sandwich beams with a metallic foam core10.1016/S0020-7403(00)00069-2 ↗