journal article·2002-07

Effect of additive-Si3N4 on mechanical properties of Ti–B–C composites

Shibo Li, Guangwu Wen, Baosheng Zhang

Materials Science and Engineering: A· Volume 332· Issue 1-2
Publisher page

Abstract

Abstract Rod-like phase TiB 2 , formed by reaction of B 4 C and Ti, in situ toughened Ti–B–C composites, and improved the mechanical properties of composites. But additives as added to system of B 4 C–Ti damaged the mechanical properties of Ti–B–C composites and restrained the formation of rod-like TiB 2 . The particles of TiB 2 , β-SiC and Ti(C, N) were produced by addition of 20 vol.% Si 3 N 4 that reacted with B 4 C and Ti. The thermodynamic processing of the reaction of B 4 C, Ti, and Si 3 N 4 was studied. Each of grain size is about 2 μm and distributes uniformly in composites. TiB 2 did not develop into rod-like microstructure, but equiaxial crystal owing to restraint of interrelated unfavorable factors. The crystalline phases were determined by X-ray diffractometry (XRD) and the microstructure of composite was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite possesses high density (>99%) and the fracture toughness of composites by addition of 20% Si 3 N 4 is 7.11 MPa √m. We discussed the effect of Si 3 N 4 on the mechanical properties of composites and analyzed the mechanisms of toughening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Lee · J. Am. Ceram. Soc. · 1994 · 77 · 165510.1111/j.1151-2916.1994.tb09771.x ↗
2. Padture · J. Am. Ceram. Soc. · 1994 · 77 · 251810.1111/j.1151-2916.1994.tb04637.x ↗
3. Padture · J. Am. Ceram. Soc. · 1994 · 77 · 51910.1111/j.1151-2916.1994.tb07024.x ↗
4. Cho · J. Mater. Sci. · 1998 · 33 · 21110.1023/A:1004326503688 ↗
5. Cao · J. Am. Ceram. Soc. · 1996 · 79 · 46110.1111/j.1151-2916.1996.tb08145.x ↗
6. Johnson · Ceram. Eng. Sci. Proc. · 1989 · 10 · 58810.1002/9780470310557.ch4 ↗
7. Claar · Ceram. Eng. Sci. Proc. · 1989 · 10 · 59910.1002/9780470310557.ch5 ↗
8. Johnson · J. Am. Ceram. Soc. · 1991 · 74 · 209310.1111/j.1151-2916.1991.tb08265.x ↗
9. Barsoum · J. Am. Ceram. Soc. · 1993 · 76 · 144510.1111/j.1151-2916.1993.tb03924.x ↗
10. Zhang · J. Chine. Ceram. Soc. · 1998 · 26 · 27
11. Brodkin · J. Am. Ceram. Soc. · 1996 · 79 · 194510.1111/j.1151-2916.1996.tb08017.x ↗
12. S.B. Li, Ph.D. thesis: the microstructure and mechanical properties of ceramics composites by hot-pressed boron carbide, University of Architecture and Civil Engineering, Harbin, China, 2000, pp. 98.
13. Simpson · J. Am. Ceram. Soc. · 1974 · 57 · 15110.1111/j.1151-2916.1974.tb10843.x ↗
14. Zhou · 1995 · 358
15. Akselsen · J. Mater. Sci. · 1992 · 27 · 198910.1007/BF01117909 ↗
16. Naka · Trans. JWRI · 1987 · 16 · 87
17. Murarka · Ann. Rev. Mater. Sci. · 1983 · 13 · 11710.1146/annurev.ms.13.080183.001001 ↗
18. Moriyama · J. Ceram. Soc. Jpn. · 1996 · 104 · 32010.2109/jcersj.104.333 ↗
19. Zhang · J. Eur. Ceram. Soc. · 1996 · 16 · 114510.1016/0955-2219(96)00034-9 ↗
20. Cho · J. Mater. Sci. · 1996 · 31 · 622310.1007/BF00354442 ↗
21. Aigner · J. Alloys Comp. · 1994 · 215 · 12110.1016/0925-8388(94)90828-1 ↗
22. Rice · J. Am. Ceram. Soc. · 1981 · 64 · 34510.1111/j.1151-2916.1981.tb10300.x ↗