journal article·2009-07

On the use of a sub-scale thermomechanical simulator to obtain accurate tensile properties of (α+β)- and β-processed Ti–6Al–4V

B. Peterson, P. Collins, H. Fraser

Publisher page

Abstract

Abstract The tensile properties obtained using an electrothermal mechanical tester (ETMT) and sub-scale specimens have been rigorously evaluated by comparing the results with those obtained using ASTM Standards over a controlled range of microstructures and temperatures (up to 300 °C) for both (α + β)- and β-processed Ti–6Al–4V. These comparisons of the ETMT results, including yield strength (YS), ultimate tensile strength (UTS), Young's modulus ( E ), total elongation, and reduction in area, have been made for six different microstructures producing controlled variations in properties. It has been shown that the ETMT may be used to successfully measure yield and ultimate tensile strength for (α + β)-processed Ti alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Terashima · Science and Technology of Welding and Joining · 2006 · 11 · 58010.1179/174329306X120868 ↗
2. Kar · Metallurgical and Materials Transactions A—Physical Metallurgy and Materials Science · 2006 · 37A · 55910.1007/s11661-006-0028-8 ↗
3. Banerjee · Materials Science & Engineering C—Biomimetic and Supramolecular Systems · 2005 · 25 · 28210.1016/j.msec.2004.12.010 ↗
4. Collins · Proceedings of Ti-2003 Science and Technology · 2003 · 3 · 1389
5. Keehan · Welding Journal · 2006 · 85 · 200S
6. Keehan · Welding Journal · 2006 · 85 · 218S
7. McBride · Materials Science and Engineering A—Structural Materials Properties Microstructure and Processing · 2004 · 384 · 12910.1016/j.msea.2004.05.072 ↗
8. Shafyei · Materials Science and Engineering A—Structural Materials Properties Microstructure and Processing · 2006 · 431 · 20610.1016/j.msea.2006.05.150 ↗
9. Searles · Measurement Science & Technology · 2005 · 16 · 6010.1088/0957-0233/16/1/009 ↗
10. Tiley · Materials Science and Engineering A—Structural Materials Properties Microstructure and Processing · 2004 · 372 · 19110.1016/j.msea.2003.12.008 ↗
11. Tiley · 2002
12. Lee · The Ohio State University · 2004
13. Dary · International Journal of Refractory Metals & Hard Materials · 1999 · 17 · 4510.1016/S0263-4368(98)00070-5 ↗
14. Griffiths · Materials Science & Engineering A · 2004 · 384 · 8310.1016/S0921-5093(04)00819-6 ↗
15. Roebuck · Materials Science & Engineering · 1996 · A209 · 35810.1016/0921-5093(95)10134-9 ↗
16. Roebuck · Scripta Materialia · 2001 · 44 · 91710.1016/S1359-6462(00)00662-X ↗
17. Roebuck · Materials Science and Technology · 1998 · 14 · 100110.1179/mst.1998.14.9-10.1001 ↗
18. Standard Test Methods for Tension Testing of Metallic Materials [Metric] E 8M-04. West Conshohocken: ASTM International, 2004.
19. Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials E 21-05. West Conshohocken: ASTM International, 2005.
20. Sutton · Image and Vision Computing · 1983 · 1 · 13310.1016/0262-8856(83)90064-1 ↗
21. Vendroux · Experimental Mechanics · 1998 · 38 · 8610.1007/BF02321649 ↗
22. Peters · Optical Engineering · 1982 · 21 · 427
23. P.C. Collins, et al., Materials Science & Engineering A, http://dx.doi.org/10.1016/j.msea.2008.12.038.10.1016/j.msea.2008.12.038 ↗
24. ASM I. Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus E 111-04. ASTM Standards, 2004.
25. Materials Properties Handbook, Titanium Alloys. ASM, 1994.
26. Titanium and Titanium Alloys. MIL HDBK-697A, 1974, p. 36.
27. Standard Test Methods for Tension Testing of Metallic Materials E 8-04. West Conshohocken: ASTM International, 2004.