journal article·2012-06

Upper-bound and finite-element analyses of non-isothermal ECAP

F.R.F. Silva, N. Medeiros, L.P. Moreira, J.F.C. Lins, J.P. Gouvêa

Publisher page

Abstract

Abstract In this paper, the thermomechanical properties of pure tantalum described by Liang and Khan [Int. J. Plast. 15 (1999) 963] through Johnson–Cook hardening law were used to propose a non-isothermal solution for estimating the temperature increasing during single-pass equal channel angular pressed metallic materials. The pressing force was determined with the upper-bound models developed by Perez and Luri [Mech. Mater. 40 (2008) 617] extended for elastic-plastic materials with the isotropic criteria of von Mises and Drucker. The von Mises plane-strain finite-element models were done with the program ABAQUS/Explicit to provide the pressing force, P , effective plastic strain, e ¯ p , and temperature along the workpiece and also to validate the proposed analytical solutions. By using Drucker's criterion, theoretical analyses showed that the decreasing of the sample temperature increment, Δ T , was primarily affected by higher values of die channels intersection angle, Φ , and moderately for its initial temperature and the tooling outer fillet radius, R outer . Also, the increasing of Δ T was more sensible for greater die inner fillet radii, R inner , and superior velocities, V 0 . In addition, the force dropped for elevated sample initial temperatures. For Φ = 90°, the finite-element models confirmed the decreasing of Δ T and P for 0 mm ≤ R outer ≤ 5 mm and their increasing for 10 mm/s ≤ V 0 ≤ 20 mm/s. Lastly, by comparing the numerical and theoretical results of P , e ¯ p and Δ T , the proposed solutions could be validated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Segal · Mater. Sci. Eng. A · 1995 · 197 · 15710.1016/0921-5093(95)09705-8 ↗
2. Iwahashi · Scr. Mater. · 1996 · 35 · 14310.1016/1359-6462(96)00107-8 ↗
3. Segal · Mater. Sci. Eng. A · 2002 · 338 · 33110.1016/S0921-5093(02)00066-7 ↗
4. Pérez · Scr. Mater. · 2004 · 50 · 38710.1016/j.scriptamat.2003.10.007 ↗
5. Luri · J. Manuf. Sci. Eng. · 2006 · 128 · 86010.1115/1.2194555 ↗
6. Pérez · Mech. Mater. · 2008 · 40 · 61710.1016/j.mechmat.2008.02.003 ↗
7. Pei · Scr. Mater. · 2003 · 49 · 30310.1016/S1359-6462(03)00284-7 ↗
8. Pei · J. Met. Nanocryst. Mater. · 2005 · 23 · 26310.4028/www.scientific.net/JMNM.23.263 ↗
9. DeLo · Metall. Mater. Trans. A · 1999 · 30 · 139110.1007/s11661-999-0287-2 ↗
10. Jiang · Mater. Sci. Eng. A · 2009 · 513–514 · 10910.1016/j.msea.2009.01.044 ↗
11. Quang · Mater. Trans. · 2009 · 50 · 4010.2320/matertrans.MD200823 ↗
12. Kim · Mater. Trans. · 2001 · 42 · 53610.2320/matertrans.42.536 ↗
13. Liang · Int. J. Plast. · 1999 · 15 · 96310.1016/S0749-6419(99)00021-2 ↗
14. Mathaudhu · Mater. Sci. Eng. A · 2007 · 463 · 9410.1016/j.msea.2006.08.120 ↗
15. Drucker · J. Appl. Mech. · 1949 · 16 · 34910.1115/1.4010009 ↗
16. Medeiros · Mater. Sci. Eng. A · 2010 · 527 · 283110.1016/j.msea.2009.12.049 ↗
17. Cazacu · Math. Mech. Solids · 2001 · 6 · 61310.1177/108128650100600603 ↗
18. Ferron · Int. J. Plast. · 1994 · 10 · 43110.1016/0749-6419(94)90008-6 ↗
19. N. Medeiros, Theoretical and numerical analyses of the equal channel angular pressing process, Ph.D. Thesis, Federal Fluminense University, Rio de Janeiro, Brazil, 2008 (in Portuguese).