journal article·2003-04

Elevated temperature deformation behavior of discontinuous-reinforced titanium aluminide matrix composites

J.S. Marte, S.L. Kampe, A.A. Wereszczak

Materials Science and Engineering: A· Volume 346· Issue 1-2
Publisher page

Abstract

Abstract A series of Al 3 Ti- and near-γ TiAl-matrix discontinuously-reinforced composites have been produced and their elevated temperature flow behavior evaluated. Specifically, steady state compressive flow stress (i.e. maximum flow stress) was determined as a function of temperature (1000, 1100, 1200 °C), strain-rate (10 −3 , 10 −4 s −1 ), and composite reinforcement loading percentage (30, 40, 50 v%). The experimental results have been used to develop unified constitutive equations for each matrix type that can be used to survey the sensitivity of the respective flow behavior to the independent variables of high temperature wrought processing. The results indicate that while the temperature and strain-rate dependence of flow stress can be described in terms of a traditional Zener–Holloman (temperature-compensated strain-rate) analysis, reinforcement volume percentage may additionally represent a non-traditional but influential independent variable of processing. It is shown that particulate volume loading can be used to positively influence the deformability characteristics of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Cahn · Intermetallics · 1998 · 6 · 56310.1016/S0966-9795(98)00027-2 ↗
2. Kimura · Intermetallics · 1998 · 6 · 56710.1016/S0966-9795(98)00061-2 ↗
3. Kumar · ISIJ Int. · 1991 · 31 · 124910.2355/isijinternational.31.1249 ↗
4. Ward · Mater. Res. Soc. Symp. Proc. · 1994 · 350 · 310.1557/PROC-350-3 ↗
5. Dimiduk · ISIJ Int. · 1991 · 31 · 122310.2355/isijinternational.31.1223 ↗
6. Froes · J. Mater. Sci. · 1992 · 27 · 511310.1007/BF02403806 ↗
7. Yamaguchi · Philos. Mag. A · 1987 · 55 · 30110.1080/01418618708209869 ↗
8. Zhang · Scripta Metall. Mater. · 1990 · 24 · 144110.1016/0956-716X(90)90411-9 ↗
9. Hyman · Metall. Trans. A · 1989 · 20A · 184710.1007/BF02663215 ↗
10. F.H. Froes, C. Suryanarayana, D. Eliezer, ISIJ Int. (1991) 1235–1248.10.2355/isijinternational.31.1235 ↗
11. Milman · Intermetallics · 2001 · 9 · 83910.1016/S0966-9795(01)00073-5 ↗
12. Kim · Intermetallics · 1998 · 6 · 62310.1016/S0966-9795(98)00037-5 ↗
13. Nakamura · Intermetallics · 1998 · 6 · 63710.1016/S0966-9795(98)00047-8 ↗
14. Lui · Intermetallics · 1998 · 6 · 65310.1016/S0966-9795(98)00062-4 ↗
15. VanMeter · Scripta Mater. · 1996 · 34 · 125110.1016/1359-6462(95)00671-0 ↗
16. Kampe · Metall. Trans. A · 1994 · 25A · 218110.1007/BF02652319 ↗
17. Pandey · Mater. Sci. Eng. · 1994 · A189 · 9510.1016/0921-5093(94)90405-7 ↗
18. Semiatin · Scripta Mater. · 1997 · 36 · 29110.1016/S1359-6462(96)00386-7 ↗
19. Seetharaman · Metall. Mater. Trans. A · 1997 · 28A · 230910.1007/s11661-997-0188-1 ↗
20. Seetharaman · 1991 · 237
21. Nobuki · Acta Metall. Mater. · 1994 · 42 · 262310.1016/0956-7151(94)90204-6 ↗
22. Martin · 1980 · 61
23. Wereszczak · J. Eur. Ceram. Soc. · 1999 · 19 · 22710.1016/S0955-2219(98)00184-8 ↗
24. Martin · Metall. Mater. Trans. · 2002 · 33A · 274710.1007/s11661-002-0397-6 ↗
25. Zener · J. Appl. Phys. · 1944 · 15 · 2210.1063/1.1707363 ↗
26. Tegart · 1966 · 43
27. Dieter · 1986 · 307
28. Briottet · Acta Mater. · 1996 · 44 · 166510.1016/1359-6454(95)00257-X ↗