Tube extrusion of AZ31 alloy with Sr additions
Source abstract
Abstract
Abstract Three Mg alloys (AZ31, and AZ31 + 0.4 and 0.8 wt%Sr) were successfully hot extruded into tubes at 400 °C through a porthole die. Strontium (Sr) additions to AZ31 alloy reduced twining and the dynamically recrystallized grain size. However, Sr also increased the surface cracking tendency during extrusion. It was noted that the complex deformation path in the porthole die distributes the Sr-rich precipitates homogeneously across the microstructure and stringer formation is effectively avoided. The material flow in the die resembles that seen in multiple equal channel angular pressing (ECAP) routes and similar and significant effects on the final texture are observed. The material flow curvatures in the extrusion direction rotate the basal poles 25° from the radial direction. Two other texture components ( δ 1 , δ 2 ) are also formed in the welding zone by the circumferential flow of material. The maximum intensity of the orientation distribution function (ODF) is reduced with increasing level of Sr. Noteworthy, the maximum intensity in AZ31 + 0.8Sr occurs at the δ 1 component while for AZ31 and AZ31 + 0.4Sr, the maximum intensity is located at the basal components. With Sr, alloying, Al is depleted from Mg solid solution and grains deform more easily in the circumferential direction. As a result, selective workhardening–dynamic recrystallization (SWH–DRX) cycles leave more grains with unfavorable slip orientations (the δ components).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Lu · Materials Science and Engineering A · 2000 · 278 · 6610.1016/S0921-5093(99)00604-8 ↗
2. Bakke · 2005
3. Development of Creep Resistant Magnesium-Aluminum-Strontium Alloys
4. Xiao · Journal of Alloys and Compounds · 2009 · 480 · L3310.1016/j.jallcom.2009.02.087 ↗
5. Luo · Journal of Materials Science · 1994 · 29 · 525910.1007/BF01171534 ↗
6. Rokhlin · 2003
7. Zhao · Materials Science and Engineering A · 2007 · 444
8. Stanford · Materials Science and Engineering A · 2008 · 496 · 39910.1016/j.msea.2008.05.045 ↗
9. Stanford · Materials Science and Engineering A · 2010 · 527 · 266910.1016/j.msea.2009.12.036 ↗
10. Mackenzie · Materials Science and Technology · 2007 · 23 · 117310.1179/174328407X226509 ↗
11. Mackenzie · Scripta Materialia · 2008 · 59 · 66510.1016/j.scriptamat.2008.05.021 ↗
12. Laser · Acta Materialia · 2008 · 56 · 279110.1016/j.actamat.2008.02.010 ↗
13. Abuleil · Transactions of Nonferrous Metals Society of China · 2009 · 19 · 4010.1016/S1003-6326(08)60225-3 ↗
14. Jing · Scripta Materialia · 2006 · 55 · 116310.1016/j.scriptamat.2006.08.020 ↗
15. Zeng · Metallurgical and Materials Transactions A · 2006 · 37 · 133310.1007/s11661-006-1085-8 ↗
16. Recrystallization and texture evolution of Mg–3%Al–1%Zn–(0.4–0.8)%Sr alloys during extrusion10.1016/j.msea.2010.10.096 ↗
17. Effect of Sr addition on texture evolution of Mg–3Al–1Zn (AZ31) alloy during extrusion10.1016/j.msea.2010.12.091 ↗
18. Pekguleryuz · 2004
19. Pekguleryuz · 2003
20. Sadeghi · 2010
21. Sadeghi · Journal of Materials Research · 2010
22. Microstructure, mechanical properties and texture evolution of AZ31 alloy containing trace levels of strontium10.1016/j.matchar.2011.05.006 ↗
23. Yield asymmetry and fracture behavior of Mg–3%Al–1%Zn–(0-1)%Sr alloys extruded at elevated temperatures10.1016/j.msea.2011.06.060 ↗
24. Effect of pre-deformation anneal on microstructure and texture evolution of Mg–3Al–1Zn alloys during hot extrusion10.1007/s10853-012-6416-0 ↗
25. Miao-quan · Applied Mathematics and Mechanics, · 1990 · 11 · 73310.1007/BF02015147 ↗
26. Jina · Scripta Materialia · 2006 · 55 · 84310.1016/j.scriptamat.2006.05.040 ↗
27. Lin · Materials Science and Engineering A · 2005 · 402 · 25010.1016/j.msea.2005.04.018 ↗
28. Ferrasse · Metallurgical and Materials Transactions A · 1997 · 28 · 104710.1007/s11661-997-0234-z ↗
29. Agnew · Materials Science and Engineering A · 2005 · 408 · 7210.1016/j.msea.2005.07.052 ↗
30. Agnew · Acta Materialia · 2005 · 53 · 313510.1016/j.actamat.2005.02.019 ↗
31. Ding · Scripta Materialia · 2008 · 59 · 100610.1016/j.scriptamat.2008.07.007 ↗
32. Field · Metallurgical and Materials Transactions A · 2001 · 33 · 96510.1007/s11661-002-1029-x ↗
33. Figueiredo · Materials Science and Engineering A · 2010 · 527 · 170910.1016/j.msea.2009.10.061 ↗