journal article·2019-05

Microstructure evolution under high temperature deformation of CoNiCrAlY bond coat alloy

Makoto Hasegawa, Maiko Iwashita, Yuji Kubota, Petr Dymáček, Ferdinand Dobeš

Publisher page

Abstract

Abstract The evolution of microstructure and texture during high temperature uniaxial compressive deformation of two-phase (γ+β) CoNiCrAlY bond coat alloy was investigated. Uniaxial compression tests were carried out at various temperatures ranging from 1073 K to 1473 K with true strain rates from 5.0 × 10−3s−1 to 5.0 × 10−4s−1 up to a true strain of −1.0. It was concluded that dynamic recrystallization (DRX) occurred in both γ and β phases, even in two-phase alloys. Under all deformation conditions, the main component of the texture in the γ phase having fcc structure was {101}. As for the conditions of low Zener-Hollomon parameter Z in the γ phase, the texture was not developed. This is due to the formation of twin boundaries during grain boundary migration which may weaken the texture. In the β phase with the B2 structure, the main component of the texture was {111}. Even under the low-Z conditions of the β phase, the texture was not developed. Because the area fraction of the β phase in CoNiCrAlY alloy is approximately 25%, and because the β-phase grains were surrounded by γ-phase grains, migration of the β-phase grain boundaries should not occur.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Reed · 2006 · 305
2. 1996 · 19
3. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
4. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
5. Change in microstructure of plasma sprayed thermal barrier coating by high temperature isothermal heat exposure10.2320/jinstmet.69.67 ↗
6. Microstructural and mechanical properties changes of a NiCoCrAlY bond coat with heat exposure time in air plasma-sprayed Y2O3-ZrO2 TBC systems10.1111/j.1744-7402.2006.02085.x ↗
7. Measurement of interfacial shear mechanical properties in thermal barrier coating systems by a barb pullout method10.1016/j.scriptamat.2005.07.012 ↗
8. Evaluation of interfacial mechanical properties under shear loading in EB-PVD TBCs by the pushout method10.1016/j.actamat.2007.02.027 ↗
9. Delamination toughness of electron beam physical vapor deposition (EB-PVD) Y2O3-ZrO2 thermal barrier coatings by the pushout method: effect of thermal cycling temperature10.1557/jmr.2008.0288 ↗
10. The effect of microstructure change of bond coat layer in air plasma-sprayed thermal barrier coating system on interfacial mechanical property under shear loading10.2320/jinstmet.73.802 ↗
11. Effects of heat exposure time and temperature on the delamination behavior of air plasma-sprayed thermal barrier coatings under shear loading10.2320/matertrans.M2016077 ↗
12. Sintering and creep behavior of plasma-sprayed zirconia- and hafnia-based thermal barrier coatings10.1016/S0257-8972(98)00669-0 ↗
13. Indentation creep of free-standing EB-PVD thermal barrier coatings10.1016/j.jeurceramsoc.2007.04.011 ↗
14. Damage evolution of TBC system under in-phase thermo-mechanical tests10.1016/j.mseb.2009.12.022 ↗
15. High temperature tensile and creep behavior of low pressure plasma-sprayed NiCoCrAlY coating alloy10.1016/0025-5416(86)90341-1 ↗
16. Stress rupture and creep behavior of a low pressure plasma-sprayed NiCoCrAlY coating alloy in air and vacuum10.1016/0040-6090(87)90280-X ↗
17. In-situ SEM observation of delamination and fracture process in plasma-sprayed CoNiCrAlY thin film10.1299/jmmp.2.1389 ↗
18. Application of small punch testing to a thermally sprayed CoNiCrAlY bond coat10.1016/j.msea.2013.06.080 ↗
19. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
20. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
21. High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy10.1016/j.msea.2015.03.097 ↗
22. Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy10.1016/j.matchar.2016.06.021 ↗
23. Hot deformation behavior of CoCrFeMnNi fcc high entropy alloy10.1016/j.matchemphys.2017.06.062 ↗
24. An empirical relation defining the stress dependence of minimum creep rate in metals
25. Self-diffusion in pure metals10.1016/0022-3115(78)90234-9 ↗
26. Humphreys · 1995 · 373
27. Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
28. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
29. Nucleation and microtexture development under dynamic recrystallization of copper10.1016/S0921-5093(01)01336-3 ↗
30. Formation mechanism of texture during dynamic recrystallization in γ-TiAl, nickel and copper examined by microstructure observation and grain boundary analysis based on local orientation measurement10.1016/S1359-6454(03)00218-0 ↗
31. Microstructural study on dynamic recrystallization and texture formation in pure nickel10.2320/matertrans.43.1183 ↗
32. Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel10.1016/S0921-5093(98)00784-9 ↗
33. Dynamic recrystallization under warm deformation of polycrystalline copper10.2355/isijinternational.38.595 ↗
34. The role of annealing twins in the dynamic recrystallization of an austenitic Fe-Ni alloy10.2355/tetsutohagane1955.68.16_2507 ↗
35. Control of microstructure and orientation distribution in Ni-Al-based (β/γ’) two phase alloys by thermomechanical processing10.1016/S1359-6454(01)00310-X ↗
36. Texture development during dynamic recrystallization in hot-deformed Fe-40at% Al alloy10.2355/isijinternational.42.903 ↗
37. Mechanism of texture formation during dynamic recrystallization of Ti-49 mol% Al10.2320/matertrans1989.35.794 ↗
38. The structure of aluminum after compression
39. Microstructure evolution of polycrystalline pure nickel during static recrystallization10.2320/matertrans.43.2243 ↗
40. Influence of the deformation conditions in the texture evolution in γ-TiAl10.1016/S0921-5093(97)00556-X ↗
41. Annealing texture development by multiple twinning in f.c.c crystals10.1016/0001-6160(84)90015-4 ↗
42. Dynamic recrystallization texture in ferritic and austenitic steels
43. Dynamic recrystallization behavior and texture evolution of NiAl intermetallic during hot deformation10.1007/s11665-017-2594-x ↗
44. Influence of texture and hydrostatic pressure on the room temperature compression of NiAl polycrystals10.1016/S0921-5093(01)01581-7 ↗