journal article·2016-07Open access

Fracture strength and Weibull analysis of Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3−δ oxygen transport membranes evaluated by biaxial and uniaxial bending tests

Li Wang, Rui Dou, Gong Wang, Yizhe Li, Mingwen Bai, David Hall, Ying Chen

Abstract

The present study evaluates the fracture strengths and the Weibull modulus of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxygen transport membranes by means of biaxial and uniaxial bending tests at both room temperature (RT) and 800 °C. The fracture strengths obtained from the biaxial bending tests are much lower than those obtained from the uniaxial bending tests while Weibull moduli (m) are similar. By utilising Weibull statistics the uniaxial strengths can be predicted from the biaxial values at both RT and 800 °C. Fracture surfaces at both RT and 800 °C show only a transgranular fracture mode. Failure origins are also determined by scanning electron microscope (SEM) based on the fractographic principles. Most defects determining the fracture strength of this particular material are found to be pores with a relatively large size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Advanced Condensed Matter Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Ba effect in doped Sr(Co0.8Fe0.2)O3−δ on the phase structure and oxygen permeation properties of the dense ceramic membranes10.1016/S1383-5866(01)00071-5 ↗
2. Dense ceramic membranes for oxygen separation10.1016/S0927-5193(96)80013-1 ↗
3. Mixed conducting ceramics for catalytic membrane processing10.1080/01614940600631348 ↗
4. Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation10.1016/j.memsci.2008.03.074 ↗
5. Oxygen permeation and stability investigations on MIEC membrane materials under operating conditions for power plant processes10.1016/j.memsci.2010.12.021 ↗
6. Mechanical properties and lifetime predictions for Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane material10.1016/j.memsci.2011.10.005 ↗
7. Synthesis, oxygen permeation study and membrane performance of a Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen-permeable dense ceramic reactor for partial oxidation of methane to syngas10.1016/S1383-5866(01)00095-8 ↗
8. Investigation of the permeation behavior and stability of a Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen membrane10.1016/S0376-7388(00)00337-9 ↗
9. Strength degradation and failure limits of dense and porous ceramic membrane materials10.1016/j.jeurceramsoc.2013.04.018 ↗
10. Anomalies in the thermomechanical behavior of BaSrCoFeO ceramic oxygen conductive membranes at intermediate temperatures10.1063/1.3193657 ↗
11. Mechanical characterization of porous Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1016/j.jeurceramsoc.2011.07.002 ↗
12. Biaxial and uniaxial data for statistical comparisons of a ceramic’s strength10.1111/j.1151-2916.1979.tb19117.x ↗
13. B., Rutkowski, Mechanical properties and Microstructure of Dense Ceramic Membranes for Oxygen Separation in Zero-Emission power plants, 2012: Universitätsbibliothek.
14. Creep behaviour of tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ gas separation membranes10.1016/j.jeurceramsoc.2010.10.030 ↗
15. Influence of thermal history on the cubic-to-hexagonal phase transformation and creep behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3-[delta] ceramics10.1016/j.memsci.2011.07.036 ↗
16. Transitions of Ba0.5Sr0.5Co0.8Fe0.2O3−δ and La0.58Sr0.4Co0.2Fe0.8O3−δ10.1016/j.matlet.2014.06.093 ↗
17. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures10.1016/S0109-5641(03)00010-1 ↗
18. Fracture Strength of α-and β-SiAION Measured by Biaxial and Four-Point Bending10.1111/j.1151-2916.1990.tb05285.x ↗
19. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
20. Analysis of fracture probabilities in nonuniformly stressed brittle materials10.1111/j.1151-2916.1964.tb14413.x ↗
21. Green · 1998
22. A biaxial-flexure test for evaluating ceramic strengths10.1111/j.1151-2916.1983.tb09964.x ↗
23. Some approximate treatments of fracture statistics for polyaxial tension10.1007/BF00040871 ↗
24. Weibull strength scaling for standardized rectangular flexure specimens10.1111/j.1151-2916.2003.tb03329.x ↗
25. A., Standard, C1499–05: Standard test method for monotonic equibiaxial flexural strength of advanced ceramics at ambient temperature, 2003, Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.
26. Standard · 2013
27. Characterisation of microstructure and hardness of perovskite-structured Ba0.5Sr0.5Co0.8Fe0.2O3−δ under different sintering conditions10.1016/j.jeurceramsoc.2016.02.010 ↗
28. Standard · 2010
29. Flexural strength of dental composite restoratives: Comparison of biaxial and three-point bending test10.1002/jbm.b.30103 ↗
30. Defect formation and mechanical stability of perovskites based on LaCrO< sub>3} for solid oxide fuel cells (SOFC)10.1016/S0955-2219(03)00097-9 ↗
31. Thermal and electrical properties of new cathode material Ba0.5Sr0.5Co0.8Fe0.2O3−δ for solid oxide fuel cells10.1149/1.1951232 ↗
32. Structure and oxygen stoichiometry of SrCo0.8Fe0.2O3−δ and Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1016/j.ssi.2006.03.041 ↗
33. Investigation of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ based cathode SOFC: II. The effect of CO2 on the chemical stability10.1016/j.apcatb.2007.06.010 ↗
34. Influence of granule character and compaction on the mechanical properties of sintered silicon nitride10.1111/j.1151-2916.1996.tb08515.x ↗
35. Indentation strength method to determine the fracture toughness of La0.58Sr0.4Co0.2Fe0.8O3−δ and Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1007/s10853-011-6095-2 ↗