journal article·2000-10

Dynamic fatigue of a Si3N4+SiC nanocomposite at 1350°C

Jan Dusza, Pavol Sajgalik, Marc Steen, Ernst Semerad

Materials Science and Engineering: A· Volume 291· Issue 1-2
Publisher page

Abstract

Abstract The dynamic fatigue strength of a hot pressed silicon nitride/silicon carbide nanocomposite and reference monolithic Si3N4 have been investigated in four-point bending at 1350°C in air using different loading rates from 0.01 to 1 mm min−1. The flexure strength significantly decreased with decreasing stress rate in both ceramics, however at all stress rates the strength of the composite was lower than that of the monolithic. The formation and growth of a stress-oxidation damage zone are primarily responsible for the strength degradation of the monolithic ceramic. In the composite intrinsic flaws were the main fracture origins, which extend by oxidation assisted slow crack growth and decrease the strength of the specimens significantly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Smyth · 1991 · 4 · 995
2. Matsui · Ceram. Int. · 1993 · 19 · 910.1016/0272-8842(93)90066-Z ↗
3. Raj · J. Am. Ceram. Soc. · 1993 · 76 · 214710.1111/j.1151-2916.1993.tb07750.x ↗
4. Becher · J. Am. Ceram. Soc. · 1998 · 81 · 282110.1111/j.1151-2916.1998.tb02702.x ↗
5. Sun · J. Am. Ceram. Soc. · 1998 · 81 · 283110.1111/j.1151-2916.1998.tb02703.x ↗
6. Wereszczak · J. Am. Ceram. Soc. · 1993 · 76 · 291910.1111/j.1151-2916.1993.tb04039.x ↗
7. Jack Lin · J. Eur. Ceram. Soc. · 1993 · 12 · 310.1016/0955-2219(93)90066-Z ↗
8. Dusza · J. Mater. Sci. Lett. · 1994 · 13 · 13110.1007/BF00416824 ↗
9. Ohji · J. Mater. Sci. · 1990 · 25 · 299010.1007/BF00584916 ↗
10. Wereszczak · J. Am. Ceram. Soc. · 1995 · 78 · 212910.1111/j.1151-2916.1995.tb08625.x ↗
11. Wereszczak · Mater. Sci. Eng. · 1995 · A191 · 157
12. Niihara · J. Ceram. Soc. Jpn. · 1991 · 99 · 97410.2109/jcersj.99.974 ↗
13. Sternitzke · J. Eur. Ceram. Soc. · 1997 · 17 · 106110.1016/S0955-2219(96)00222-1 ↗
14. Besson · J. Eur. Ceram. Soc. · 1998 · 18 · 189310.1016/S0955-2219(98)00128-9 ↗
15. Rendtel · J. Eur. Ceram. Soc. · 1999 · 19 · 21710.1016/S0955-2219(98)00192-7 ↗
16. Hollenberg · J. Am. Ceram. Soc. · 1971 · 54 · 19610.1111/j.1151-2916.1971.tb12263.x ↗
17. Sajgalik · J. Eur. Ceram. Soc. · 2000 · 20 · 45310.1016/S0955-2219(99)00176-4 ↗
18. Wiederhorn · 1974 · 2 · 613
19. S.R. Choi, K. Breder, Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-rate Flexural Testing at Elevated Temperatures, Provisional Standard, Rev. S.1/August, 1998.
20. Dusza · Key Eng. Mat. · 1999 · 175–176 · 31110.4028/www.scientific.net/KEM.175-176.311 ↗
21. Dusza · J. Am. Ceram. Soc. · 1999 · 82 · 361310.1111/j.1151-2916.1999.tb02287.x ↗
22. Gratwohl · 1984 · II · 573