journal article·2007-04

Modeling of the effect of cavitation on tensile failure of superplastic alloys

A.R. Ragab

Publisher page

Abstract

Abstract A model for creep deformation due to combined diffusion and plastic flow is applied to tensile failure of superplastic alloys by cavitation. The model requires input of strain-rate sensitivity, initial void radius and its volume fraction. Failure due to void coalescence is detected by micro-necking of the intervoid matrix material. The void shape change due to plastic flow is incorporated in the model. It is found that the effect of grain-boundary sliding as described by the local stress system in vicinity of the cavitating facet has a major influence on predictions of cavity growth rate and hence the resulting fracture strains. The model is applied to predict fracture strains of various superplastic materials, e.g. Al–Li, Cu–Zn and Ti–Al alloys. Comparison of these predictions with experiments is in fair agreement. Discrepancies may be due to neglecting the occurrence of diffuse necking in reporting ductility at fracture. The lack of quantified micro-mechanical parameters and hence the inevitable resort to assuming their values represent another shortcoming in applying the model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Ghandi · 1989 · 419
2. Ridely · Journal de Physique · 1987 · 48 · C252
3. Ma · 1989 · 367
4. Lombard · Metall. Mater. Trans. A · 2001 · 32A · 276910.1007/s11661-001-1028-3 ↗
5. Nicolaou · Metall. Mater. Trans. A · 1996 · 27A · 367510.1007/BF02595459 ↗
6. Semiatin · Mater. Sci. Eng. · 1998 · A243 · 110.1016/S0921-5093(97)00776-4 ↗
7. Lian · Mater. Sci. Technol. · 1986 · 2 · 109310.1179/mst.1986.2.11.1093 ↗
8. Zaki · 1991 · 467
9. Caceres · Acta Metall. · 1984 · 32 · 42310.1016/0001-6160(84)90116-0 ↗
10. Chandra · J. Aust. Inst. Met. · 1975 · 20 · 220
11. Kaibyshev · Mater. Sci. Technol. · 2003 · 19 · 149110.1179/026708303225008167 ↗
12. Stowell · Met. Sci. · 1983 · 17 · 10
13. Stowell · Acta Metall. · 1984 · 32 · 3510.1016/0001-6160(84)90199-8 ↗
14. Needleman · Acta Metall. · 1980 · 28 · 131510.1016/0001-6160(80)90001-2 ↗
15. Rice · Acta Metall. · 1981 · 29 · 67510.1016/0001-6160(81)90150-4 ↗
16. Cocks · Met. Sci. · 1980 · 14 · 39510.1016/0036-9748(80)90333-6 ↗
17. Wilkinson · Mater. Sci. Technol. · 1986 · 2 · 108610.1179/mst.1986.2.11.1086 ↗
18. Tvergaard · J. Mech. Phys. Solids · 1984 · 32 · 37310.1016/0022-5096(84)90021-8 ↗
19. Tvergaard · Acta Metall. · 1984 · 32 · 197710.1016/0001-6160(84)90178-0 ↗
20. Ragab · Mater. Sci. Technol. · 2005 · 21 · 39910.1179/174328405X36584 ↗
21. Thomason · 1990
22. Pilling · Mater. Sci. Technol. · 1985 · 1 · 46110.1179/mst.1985.1.6.461 ↗
23. Kannan · Scripta Mater. · 1997 · 37 · 45510.1016/S1359-6462(97)00108-5 ↗
24. Khaleel · Int. J. Plasticity · 2001 · 17 · 27710.1016/S0749-6419(00)00036-X ↗
25. Rice · J. Mech. Phys. Solids · 1969 · 138 · 601
26. Hancock · Met. Sci. · 1976 · 10 · 31910.1016/0036-9748(76)90084-3 ↗
27. Ragab · Acta Mater. · 2004 · 52 · 399710.1016/j.actamat.2004.05.015 ↗
28. Yadava · Mater. Sci. Eng. · 1979 · 37 · 12710.1016/0025-5416(79)90076-4 ↗
29. Ghosh · Metall. Trans. A · 1982 · 13A · 73310.1007/BF02642386 ↗
30. Bridgman · 1952
31. Ragab · Memoires Scientifiques Metallurgie · 1975 · 205
32. Budiansky · 1982 · vol. 13
33. Worswick · J. Mech. Phys. Solids · 1990 · 38 · 60110.1016/0022-5096(90)90025-Y ↗
34. Pardoen · Metall. Trans. A · 1998 · 29A · 189510.1007/s11661-998-0014-4 ↗