journal article·2008-12

The impact of various cooling environments on the distribution of macroscopic residual stresses in near-surface layers of ground steels

Z. Pala, N. Ganev

Materials Science and Engineering: A· Volume 497· Issue 1-2
Publisher page

Abstract

Abstract Grinding often plays the role of final machining, and, therefore, its parameters significantly affect the properties of the treated surface. In this study, the state of surface residual stresses (RSs) and their depth distribution into the bulk is investigated with respect to various cooling environments during grinding. In order to acquire complete stress tensors, the sample surfaces were analysed using the X-ray diffraction technique. Since ɛφψ(sin2 ψ) dependences in grinding direction are non-linear and exhibit psi-splitting, the method proposed by Dolle and Hauk was used to evaluate the tensors of anisotropic triaxial state of RS. The effective penetration depth of Cr Kα X-ray radiation into ferrous materials is approximately 4 μm, and, therefore, removal of surface layers is necessary in order to pinpoint the distribution of RSs beneath the surface. The process of electro-chemical polishing ensures that the impact of material removal causes minimal or negligible mechanical and thermal distortions of the investigated state of stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Engineering and Environmental Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Youtsos · 2006
2. Abu-Nabah · NDT&E Int. · 2007 · 40 · 40510.1016/j.ndteint.2007.01.003 ↗
3. Lee · Proc. IMechE · 2006 · 220 · 52510.1243/0954405054JEM232 ↗
4. Chen · J. Mater. Process. Technol. · 2000 · 107 · 21610.1016/S0924-0136(00)00692-0 ↗
5. Balart · Mater. Sci. Eng. A · 2004 · 367 · 13210.1016/j.msea.2003.10.239 ↗
6. Mahdi · J. Mater. Process. Technol. · 1999 · 95 · 23810.1016/S0924-0136(99)00327-1 ↗
7. Guo · Int. J. Mech. Sci. · 2007 · 46 · 37110.1016/j.ijmecsci.2004.03.014 ↗
8. Kohli · Trans. ASME · 1995 · 117 · 160
9. Moving sources of heat and temperature at sliding contact
10. Carslaw · 1959
11. Fürbacher · 2007
12. Howes · 1991
13. Hwang · ASME J. Tribol. · 2003 · 125 · 37710.1115/1.1537748 ↗
14. Outwater · Trans. ASME · 1952 · 74 · 73
15. Babic · Key Eng. Mater. · 2005 · 291–292 · 23910.4028/www.scientific.net/KEM.291-292.239 ↗
16. Gao · Cryogenics · 2005 · 45 · 17310.1016/j.cryogenics.2004.09.004 ↗
17. Macherauch · Zeitsch. angew. Physik · 1961 · 13 · 33
18. Welzel · J. Appl. Cryst. · 2005 · 38 · 2110.1107/S0021889804029516 ↗
19. Zantopulos · Adv. X-ray Anal. · 1971 · 14 · 360
20. Residual Stress and Stress Gradients
21. Dölle · Materialprüf · 1976 · 18 · 427
22. Hauk · 1997
23. Hauk · Adv. X-ray Anal. · 1983 · 81
24. Moore · SAE Trans. · 1958 · 66 · 340
25. Sikarskie · Trans. Metall. Soc. AIME · 1967 · 239 · 577
26. Possibilities of FEM for verification of X-ray measurements of residual stresses depth distribution
27. Okolo · Mater. Sci. Forum · 2006 · 524–525 · 68510.4028/www.scientific.net/MSF.524-525.685 ↗
28. Behnken · Mater. Sci. Forum · 2002 · 404–407 · 26910.4028/www.scientific.net/MSF.404-407.269 ↗
29. Gondi · Z. Metallkd. · 1990 · 81 · 570
30. Wassermann · 1962
31. Hanabusa · Thin Solid Films · 1999 · 343–344 · 16410.1016/S0040-6090(98)01654-X ↗