journal article·2008-03

Study on microstructure and tensile properties of in situ fiber reinforced aluminum matrix composites

Wenxing Zhang, Donglang Chai, Guang Ran, Jing’en Zhou

Materials Science and Engineering: A· Volume 476· Issue 1-2
Publisher page

Abstract

Abstract A new in situ fiber reinforced aluminum matrix composites (in situ Al-MMCs) was fabricated based on powder metallurgy (PM). The reinforced fiber was in situ synthesized during hot extrusion procedure of a mixed pure metal powders compact of Al–10 wt%Mg. The microstructure and tensile properties of the in situ Al-MMCs were analyzed and measured. The experimental results showed that the in situ aluminum matrix composites consists of aluminum matrix and fibrous β-Al3Mg2 reinforcement with about tens of microns in diameter and 1 mm in length. Quantitative analysis showed that the content of reinforced fiber is about 18.9 wt%. The tensile stress–strain curve of in situ Al-MMCs involved a remarkable nonlinear deformation region and a long yield plateau region, and the reason is believed to result from deformation induced phase transition of β-Al3Mg2. The yield strength σ0.2, tensile strength and elongation of in situ Al-MMCs is 137 MPa, 147 MPa and 7.0%, respectively. No any fibers pulled out from aluminum matrix can be observed in fracture surface after tensile test. The tensile fracture mechanism of in situ Al-MMCs is quasi-cleavage feature model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Breval · Compos. Eng. · 1995 · 5 · 112710.1016/0961-9526(95)00048-R ↗
2. Kaczmar · J. Mater. Process. Technol. · 2000 · 106 · 5810.1016/S0924-0136(00)00639-7 ↗
3. Blucher · Composites · 2001 · A32 · 175910.1016/S1359-835X(01)00024-0 ↗
4. Torralba · J. Mater. Process. Technol. · 2003 · 133 · 20310.1016/S0924-0136(02)00234-0 ↗
5. Gotrnan · Mater. Sci. Eng. A · 1994 · 187 · 18910.1016/0921-5093(94)90347-6 ↗
6. Yamamoto · Mater. Sci. Eng. A · 1997 · 239–240 · 64710.1016/S0921-5093(97)00643-6 ↗
7. Horvitz · Acta Mater. · 2002 · 50 · 196110.1016/S1359-6454(02)00041-1 ↗
8. J.M. Brupbacher, L. Christodoulou, D.C. Nagli, Process for Forming Metal Ceramic Composites, US Patent No. 4,710,348 (1987).
9. Kuruvilla · Scripta Metall. Mater. · 1990 · 24 · 87310.1016/0956-716X(90)90128-4 ↗
10. Jiang · Scripta Mater. · 2003 · 48 · 71310.1016/S1359-6462(02)00551-1 ↗
11. Benjamin · Metall. Trans. · 1970 · 1 · 294310.1007/BF03037835 ↗
12. Wu · J. Alloys Compd. · 2000 · 299 · 910.1016/S0925-8388(99)00643-X ↗
13. Lu · Mater. Sci. Eng. A · 2002 · 334 · 16310.1016/S0921-5093(01)01790-7 ↗
14. Tjong · Mater. Sci. Eng. A · 2000 · 29 · 4910.1016/S0927-796X(00)00024-3 ↗
15. Hashim · J. Mater. Process. Technol. · 2001 · 119 · 32410.1016/S0924-0136(01)00975-X ↗
16. Magnin · Metal. Trans. A · 1988 · 19 · 195510.1007/BF02645199 ↗
17. Bi · J. Mater. Eng. (Chin.) · 2004 · 9 · 48
18. Wenxing · Rare Metal Mater. Eng. (Chin.) · 2005 · 34 · 489
19. Brandes · 1998
20. Kishimoto · J. Alloys Compd. · 2003 · 355 · 16110.1016/S0925-8388(03)00258-5 ↗