Gauge volume effects in residual stress determination by neutron diffraction: The strength differential effect in metal matrix composites
Source abstract
Abstract
In this work, the residual stress (RS) in two differently prepared 6061Al-15 vol.% SiCw composites and their respective unreinforced alloys has been studied by neutron diffraction (ND). Hydrostatic and deviatoric stresses were found in both unreinforced alloys and composites. The presence of hydrostatic microscopic RS agrees with the fact that a large fraction of the SiC composites whiskers is randomly oriented. The axial deviatoric microscopic stress arises from the remaining population of the SiC whiskers aligned along the extrusion axis. Different hydrostatic macro- and micro-RS were determined upon using different instrumental set-ups, and therefore different gauge volumes. This can be attributed to the different size of the sampled regions in the specimens, to the direct dependence of the micro- (elastic mismatch) on the macro-stress and to the sensitivity of the SiC powder reference to the set-up. On the contrary, the deviatoric macro and micro-RS did not vary with the gauge volume. Therefore, all phenomena (e.g. the strength differential effect) linked to the deviatoric micro-RS can be considered to be independent of the experimental set-up. © 2006 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Ledbetter · Mater. Sci. Eng. · 1987 · 89 · 5310.1016/0025-5416(87)90249-7 ↗
2. Arsenault · Acta Metall. · 1987 · 35 · 65110.1016/0001-6160(87)90188-X ↗
3. Hirth · Metall. Trans. · 1970 · 1 · 310.1007/BF02642816 ↗
4. Arsenault · Mater. Sci. Eng. · 1987 · 96 · 7710.1016/0025-5416(87)90542-8 ↗
5. Dutta · Acta Metall. Mater. · 1993 · 41 · 88510.1016/0956-7151(93)90023-L ↗
6. Shen · Acta Metall. Mater. · 1995 · 43 · 170110.1016/0956-7151(94)00346-J ↗
7. Levy · J. Eng. Mater. Technol. · 1993 · 115 · 12910.1115/1.2902145 ↗
8. Fernández · Acta Mater. · 2004 · 52 · 547110.1016/j.actamat.2004.08.005 ↗
9. Withers · Mater. Sci. Technol. · 2001 · 17 · 35510.1179/026708301101509980 ↗
10. Wolfstieg · HTM · 1976 · 31 · 110.1515/htm-1976-311-201 ↗
11. Takao · J. Appl. Mech. · 1982 · 53610.1115/1.3162509 ↗
12. Maeda · Scripta Mater. · 1997 · 36 · 33510.1016/S1359-6462(96)00372-7 ↗
13. Borrego · Composite Sci. Technol. · 2002 · 62 · 73110.1016/S0266-3538(02)00043-X ↗
14. Borrego · Scripta Mater. · 1996 · 34 · 47110.1016/0956-716X(95)00542-4 ↗
15. R. Fernández, G. Bruno, G. González-Doncel, Proceedings of ICCM 15, Durban, South Africa, July 2005 (Available on CD only).
16. R. Fernández, PhD thesis, University of Complutense, Madrid, Spain, 2003.
17. Appendino · Mater. Sci. Eng. A · 1991 · 135 · 27510.1016/0921-5093(91)90575-8 ↗
18. Kouzeli · Acta Mater. · 2002 · 50 · 3910.1016/S1359-6454(01)00327-5 ↗
19. Olsen · Trans. ASM · 1969 · 62 · 711
20. Dölle · HTM · 1979 · 34 · 27210.1515/htm-1979-340605 ↗
21. Faninger · HTM · 1976 · 31 · 16
22. Fernández · Appl. Phys. · 2002 · A74 · S114610.1007/s003390101207 ↗
23. VAMAS TWA 20 standard, ISO/TTA 3, 2001.
24. A.D. Krawitz, Measurements of residual and applied stresses using neutron diffraction, in: M.T. Hutchings, A.D. Krawitz (Eds.), Conference Proceedings, Kluwer Academic Publishers, Boston, 1992, pp. 405–420.10.1007/978-94-011-2797-4_34 ↗
25. Fitzpatrick · Acta Mater. · 1997 · 45 · 486710.1016/S1359-6454(97)00209-7 ↗
26. Kröner · Z. F. Phys. · 1958 · 151 · 50410.1007/BF01337948 ↗
27. Sen · Int. J. Mech. Sci. · 2000 · 42 · 201310.1016/S0020-7403(99)00063-6 ↗
28. Withers · Acta Metall. · 1989 · 37 · 306110.1016/0001-6160(89)90341-6 ↗
29. Clyne · 1993
30. Eshelby · Proc. R. Soc. · 1957 · A241 · 37610.1098/rspa.1957.0133 ↗
31. Levy-Tubiana · Mater. Sci. Eng. · 2003 · A341 · 7410.1016/S0921-5093(02)00204-6 ↗
32. P. Fernández, G. González-Doncel, G. Bruno, Proceedings of ICCM 15, Durban, South Africa, 2005 (Available on CD only).