High temperature mechanical behavior of tube stackings – Part I: Microstructural and mechanical characterization of Inconel® 600 constitutive material
Source abstract
Abstract
This paper is the first part of a set of two papers dedicated to the mechanical behavior of cellular materials at high temperatures. For that purpose, cellular materials made of brazed tube stacking cores have been considered here. This paper addresses the characterization of the elasto-viscoplastic properties of the constitutive material of the tubes, Inconel 600, by means of tensile tests. Various temperatures and strain rates were investigated, from room temperature to 800°C, in order to study the influence of both the brazing heat treatment and the test temperature on the mechanical properties of Inconel 600. Whereas the heat treatment drastically decreases the strength of the tubes, a significant viscous effect is revealed at 800°C. Electron backscattered diffraction analyses carried out post-mortem on samples showed that both dynamic recrystallization and recovery occurred during tensile tests performed at 800°C, especially at lower strain rates. In contrast, a highly deformed and textured microstructure was observed for the tubes loaded at lower temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Evans · 1997
2. Ochsner · 2009
3. About the use of micro-indentation to determine the constitutive material's mechanical behavior of cellular structures10.1051/epjconf/20100604003 ↗
4. Mechanical behavior of hollow-tube stackings: experimental characterization and modeling of therole of their constitutive material behavior10.1016/j.actamat.2012.06.045 ↗
5. Biaxial crushing of honeycombs – part I: experiments10.1016/S0020-7683(98)00224-8 ↗
6. In-plane biaxial crushing of honeycombs – part II analysis10.1016/S0020-7683(98)00225-X ↗
7. V. Marcadon, D. Lévêque, A. Rafray, F. Popoff, D. Mézières, C. Davoine, High temperature mechanical behavior of tube stackings – Part II: Comparison between experiment and modeling, Mater. Sci. Eng. A, 2016, 10.1016/j.msea.2016.09.052.10.1016/j.msea.2016.09.052 ↗
8. Microstructural aspects of the thermal treatment of inconel alloy 60010.1016/0026-0800(80)90020-8 ↗
9. Effect of heat treatment on fatigue crack growth rate of Inconel 690 and Inconel 60010.1016/0022-3115(96)00372-8 ↗
10. High voltage electron microscopy observations of microdefformation in alloys 600 tubing10.1016/0036-9748(86)90465-5 ↗
11. Effects of grain boundary carbides on the mechanical properties of Inconel 60010.1016/S0254-0584(00)00484-3 ↗
12. The microstructural response of mill-annealed and solution-annealed INCONEL 600 to heat treatment10.1007/BF02670327 ↗
13. Internal friction studies of carbon and its redistribution kinetics in inconel 600 and 690 alloys under dynamic strain aging conditions10.1016/j.msea.2006.02.207 ↗
14. The role of deformation temperature and strain on grain boundary engineering of inconel 60010.1016/j.msea.2014.02.078 ↗
15. Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 60010.1016/j.matdes.2009.05.033 ↗
16. Constitutive model for nickel alloy 690 (inconel 690) at various strain rates and temperatures10.1016/j.ijplas.2015.08.010 ↗
17. The influence of strain-induced damage on the mechanical response of open-cell aluminum foam10.1016/j.actamat.2007.10.034 ↗
18. On the plastic collapse stress of open-cell aluminum foam10.1016/j.scriptamat.2008.05.025 ↗
19. The microstructural origin of strain hardening in two-dimensional open-cell metal foams10.1016/j.ijsolstr.2010.04.009 ↗
20. Besson · 2010
21. Creep constitutive equations for a 0.5Cr-0.5Mo-0.25V ferritic steel in the temperature range 600–675°C10.1243/03093247V314299 ↗
22. High-temperature creep rupture of low alloy ferritic steel butt-welded pipes subjected to combined internal pressure and end loadings10.1098/rsta.2005.1583 ↗
23. Viscoplastic constitutive equations of combustion chambers materials including cyclic hardening and strain aging10.1016/j.ijplas.2012.09.011 ↗
24. An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue10.1016/j.ijfatigue.2012.11.001 ↗
25. A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel10.1115/1.4025618 ↗