journal article·2016-09

A novel approach for modeling the flow stress curves of austenite under transient deformation conditions

E.S. Puchi-Cabrera, J.D. Guérin, M. Dubar, L. Dubar, A. Dubois

Publisher page

Abstract

A novel differential form of the integrated constitutive description earlier advanced by Jonas et al., for modeling the flow stress of austenite, is developed. The temperature and strain rate dependencies are introduced in the formalism through the temperature-dependent shear modulus of the material, the yield, saturation and steady-state stresses, as well as the time to achieve 50% dynamic recrystallization. The correlation between each of the above stresses and the Zener-Hollomon parameter is carried out by means of the Sellars-Tegart-Garofalo model employing the activation energy for the self-diffusion of Fe in austenite (Q=284 kJ mol−1). The proposed formalism involves the determination of the flow stress of the material by means of the numerical integration of three differential equations. In this way, it is possible to compute the flow stress both during the work-hardening and dynamic recovery stage, as well as from the onset of dynamic recrystallization up to the work softening transient and final achievement of the steady-state stress. Therefore, it is possible to predict the flow stress curves of austenite under both sharp and ramped transient loading conditions leading to the occurrence of dynamic recrystallization, a novel feature that cannot be accomplished by means of the early advanced model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Test a constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable10.1016/0001-6160(88)90030-2 ↗
2. Effect of changing strain rate on flow stress during hot deformation of Type 316L stainless steel10.1016/j.msea.2008.02.005 ↗
3. On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model10.1016/j.msea.2013.11.030 ↗
4. The flow behaviors of CLAM steel at high temperature10.1016/j.msea.2014.01.038 ↗
5. Physically based constitutive analysis to predict flow stress of medium carbon and vanadium microalloyed steels10.1016/j.msea.2014.02.068 ↗
6. Constitutive analysis of the hot deformation behavior of Fe–23Mn–2Al–0.2C twinning induced plasticity steel in consideration of strain10.1016/j.matdes.2012.08.004 ↗
7. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
8. A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation10.1016/j.matdes.2015.04.005 ↗
9. Dislocation-mechanics-based constitutive relations for material dynamics calculations10.1063/1.338024 ↗
10. A modified Zerilli–Armstrong constitutive model to predict hot deformation behavior of 20CrMo alloy steel10.1016/j.matdes.2013.10.080 ↗
11. Effect of carbon content on hot deformation behaviors of vanadium microalloyed steels10.1016/j.msea.2013.12.063 ↗
12. Analysis of deformation behavior and workability of advanced 9Cr–Nb–V ferritic heat resistant steels10.1016/j.msea.2014.02.050 ↗
13. The kinetics of dynamic recrystallization of a low carbon vanadium-nitride microalloyed steel10.1016/j.msea.2014.03.019 ↗
14. Hot deformation behavior,dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels10.1016/j.msea.2015.03.104 ↗
15. Modified Arrhenius-type constitutive model and artificial neural network-based model for constitutive relationship of 316LN stainless steel during hot deformation10.1016/S1006-706X(15)30063-7 ↗
16. A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel10.1016/j.commatsci.2014.10.044 ↗
17. Modeling the hot flow behavior of a Fe–22Mn–0.41C–1.6Al–1.4Si TWIP steel microalloyed with Ti, V and Nb10.1016/j.msea.2015.07.078 ↗
18. Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels10.1016/j.msea.2015.10.123 ↗
19. Constitutive modeling for flow behaviors of superaustenitic stainless steel S32654 during hot deformation10.1016/S1006-706X(16)30031-0 ↗
20. A physically-based constitutive model for SA508-IIIsteel: modeling and experimental verification10.1016/j.msea.2015.03.036 ↗
21. A unified internal state variable material model for inelastic deformation and microstructure evolution in SS30410.1016/j.msea.2013.11.071 ↗
22. Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel10.1016/j.matdes.2016.05.118 ↗
23. A new unified approach for modeling recrystallization during hot rolling of steel10.1016/j.msea.2015.08.085 ↗
24. Flow curve modelling of an austenitic stainless steel at high temperatures starting from the one-parameter model of strain hardening10.4028/www.scientific.net/MSF.706-709.1361 ↗
25. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗
26. A new approach to modeling the flow curve of hot deformed austenite10.2355/isijinternational.51.945 ↗
27. Modeling the flow curve of hot deformed austenite10.4028/www.scientific.net/MSF.715-716.81 ↗
28. Simulation of austenite flow curves under industrial rolling conditions using a physical dynamic recrystallization model10.2355/isijinternational.52.1145 ↗
29. A unified phenomenological description of the work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
30. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
31. Laws for work-hardening and low-temperature creep10.1115/1.3443340 ↗
32. Development of a computer code for the interpretation of results of hot plane strain compression tests10.2355/isijinternational.40.1230 ↗
33. Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation10.1016/0001-6160(69)90049-2 ↗
34. Simple constitutive equations for steel at high temperature10.1007/BF02675567 ↗
35. Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions10.1016/j.ijmecsci.2015.04.021 ↗
36. Constitutive description for the design of hot-working operations of a 20MnCr5steel grade10.1016/j.matdes.2014.05.011 ↗
37. Dynamic recrystallization during the transient deformation of a vanadium microalloyed steel10.1016/0001-6160(83)90053-6 ↗
38. Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
39. Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 747510.1016/j.actamat.2008.09.001 ↗
40. Mechanical behavior and microstructure evolution during steady-state dynamic recrystallization in the austenitic steel 800H10.1016/j.msea.2008.11.035 ↗
41. Multi-phase-field simulations of dynamic recrystallization during transient deformation10.2355/isijinternational.51.1717 ↗