journal article·2016-05

Plastic deformation mechanisms of NiCuCrMoTiAlNb Ni-based alloys at cryogenic temperature

Shuyong Jiang, Dong Sun, Yanqiu Zhang, Xiaoming Zhu, Man Wang, Chengzhi Zhao

Publisher page

Abstract

Abstract Three kinds of Ni-based alloys with a nominal chemical composition of Ni 57−x Cu 20 Cr 15 Mo 5 Ti 2 Al 1 Nb x (wt%), where x stood for 1, 3 and 5, respectively, were fabricated in order to be used for cryogenic environments. The microstructures of three as-cast Ni-based alloys are characterized by dendrite structure, where the matrix belongs to γ-Ni solid solution phase. The emphasis was laid on plastic deformation mechanisms of three as-cast Ni-based alloys under cryogenic environments. Nb element was found to play a significant role in strengthening the Ni-based alloys, where the strength of Ni-based alloys increased with the increase in the content of Nb element. With the increase in the content of Nb element, in particular, nanocrystallization becomes more and more predominant. It would be proposed that geometrically necessary dislocations play a more dominant role in nanocrystallization of Ni-based alloy with high Nb content. At cryogenic temperature, with the increase in the plastic strain and the resultant dislocation density, dislocation slip along with deformation twinning became dominant in the plastic deformation mechanisms. Based on dislocation slip and deformation twinning, the microstructures of Ni-based alloy were able to be refined so consecutively that nanocrystalline grains appeared in the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Constitutive models for high-temperature flow behaviors of a Ni-based superalloy10.1016/j.matdes.2014.02.041 ↗
2. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation10.1016/j.matdes.2013.12.072 ↗
3. Microstructural characteristics of forged and heat treated Inconel-718 disks10.1016/j.matdes.2013.06.004 ↗
4. Work hardening and aging contribution on the mechanical properties of X-750 nickel-based superalloy10.1016/j.msea.2012.10.095 ↗
5. Cryogenic reliability of composite insulation panels for liquefied natural gas (LNG) ships10.1016/j.compstruct.2011.08.009 ↗
6. Numerical study of transient natural convection in a pressurized LNG storage tank10.1016/j.applthermaleng.2012.11.021 ↗
7. Numerical model to predict deformation of corrugated austenitic stainless steel sheet under cryogenic temperatures for design of liquefied natural gas insulation system10.1016/j.matdes.2013.12.037 ↗
8. Investigation on the microstructure and toughness properties of austenitic and duplex stainless steels weldments under cryogenic conditions10.1016/j.matdes.2015.04.008 ↗
9. Crystallographic, microstructure and mechanical characteristics of dynamically processed IN718 superalloy10.1016/j.jallcom.2014.02.011 ↗
10. Hot deformation and processing maps of X-750 nickel-based superalloy10.1016/j.matdes.2013.03.081 ↗
11. Corrosion wear synergistic behavior of Hastelloy C276 alloy in artificial seawater10.1016/S1003-6326(15)63650-0 ↗
12. Constitutive modelling and identification of parameters of the plastic strain-induced martensitic transformation in 316L stainless steel at cryogenic temperatures10.1016/j.ijplas.2005.08.002 ↗
13. Computational evaluation of resistance of fracture capacity for SUS304L of liquefied natural gas insulation system under cryogenic temperatures using ABAQUS user-defined material subroutine10.1016/j.matdes.2013.03.064 ↗
14. Variation of the deformation mechanisms in a nanocrystalline Pd–10at% Au alloy at room and cryogenic temperatures10.1016/j.ijplas.2014.04.011 ↗
15. Microstructure of 1Cr18Ni9Ti stainless steely by cryogenic compression deformation and annealing10.1016/j.msea.2005.06.022 ↗
16. Enhancing grain refinement in polycrystalline materials using surface mechanical attrition treatment at cryogenic temperatures10.1016/j.scriptamat.2013.05.036 ↗
17. Comparison of microstructures and strengths of an Al–2.5Mg alloy subjected to severe plastic deformation at room and liquid nitrogen temperatures10.1016/j.msea.2013.05.073 ↗
18. Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of pure metals: investigation using high-pressure torsion10.1016/j.msea.2014.06.084 ↗
19. Deformation mechanism of NiTi shape memory alloy subjected to severe plastic deformation at low temperature10.1016/j.msea.2012.08.149 ↗
20. Enhanced mechanical properties in Cu–Zn alloys with a gradient structure by surface mechanical attrition treatment at cryogenic temperature10.1016/j.msea.2014.12.070 ↗
21. On the current understanding of strain gradient plasticity10.1016/j.msea.2004.01.086 ↗
22. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗