Microstructural analysis of the 〈111〉 and 〈110〉 nickel single crystals subjected to severe plastic deformation by hydroextrusion
Source abstract
Abstract
Abstract The effect of hydrostatic extrusion (HE) on the microstructure and crystalline orientation of the 〈111〉 and 〈110〉 nickel single crystals was examined. The crystals were deformed by two-step hydrostatic extrusion to achieve the true strain e r =2.4. After the extrusion the samples had the form of cylindrical rods. The mechanical properties of the extruded samples (expressed in terms of their microhardness) were compared with the mechanical properties of ultra-fine grained nickel obtained by subjecting polycrystalline nickel to HE. The microhardness of the two deformed crystals appeared to be similar. The microstructure of the samples and the orientation evolution were examined using transmission electron microscopy (TEM), electron back scattered diffraction (EBSD) and X-Ray diffraction (XRD). Both the deformed crystals had an inhomogeneous ultra-fine-grained structure (as observed by TEM). The average grain diameter was 300 nm. The majority of the grain boundaries had high angle disorientations (EBSD). In both the deformed samples the predominating orientation was 〈111〉 (XRD). In the 〈111〉 oriented crystal 95% of the initial orientation was preserved whereas in the 〈110〉 oriented crystal the initial orientation was predominantly transformed into 〈111〉 and 〈100〉.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Cziráki · Nanostruct. Mater. · 1995 · 6 · 54710.1016/0965-9773(95)00117-4 ↗
2. Kilmametov · Z. Kristallogr · 2007 · 26 · 33910.1524/zksu.2007.2007.suppl_26.339 ↗
3. Gu · Scr. Mater. · 2006 · 54 · 57910.1016/j.scriptamat.2005.10.041 ↗
4. Yang · Scr. Mater. · 2008 · 58 · 79010.1016/j.scriptamat.2007.12.039 ↗
5. Han · Mater. Sci. Forum · 2010 · 633–634 · 511
6. Kulczyk · Mater. Sci. · 2005 · 23
7. M. Kulczyk, Application of Hydrostatic Extrusion a Method of Microstructure Refinement of Pure Ni, Ph.D. Thesis, Warsaw University of Technology, Materials Science and Engineering Faculty, 2007.
8. R. Hill, Proc. R. Soc., 193A, 1948, 281.10.1098/rspa.1948.0045 ↗
9. W.F. Hosford, W.A. Backofen, Fundamentals of Deformation Processing, 1964.
10. Lee · Trans. Metall. Soc. AIME · 1966 · 236 · 1077
11. Reed · Trans. Metall. Soc. AIME · 1988 · 242 · 180
12. Zhu · J. Microsc · 2004 · 56 · 58