journal article·2009-01

Influence of internal pressure on hydroforming of double handles crankshaft

J.F. Lin, S.J. Yuan

Materials Science and Engineering: A· Volume 499· Issue 1-2
Publisher page

Abstract

The hydroforming process of a double handles crankshaft with the biggest expansion ratio up to 54% is studied by means of simulation and experiment in this paper. The effects of loading paths during hydroforming process on the failure modes are analyzed. The simulation results show that the part can be formed successfully with the feeding pressure selected in the range from 65 to 75 MPa. A successful crankshaft component can be manufactured in the experiment as the internal pressure is 70 MPa. Folding back occurs as the internal pressure 75 MPa. The most serious thinning occurs in the top of crankshaft handle. The maximum thickness appears in the area of the opposite to crankshaft handle. The maximum of thinning rate by the simulation is about 11%, which is close to 10% that is obtained in experiment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (5)

Show source-provided references
1. Ahmetogh · J. Mater. Proc. Technol. · 2000 · 98 · 22410.1016/S0924-0136(99)00203-4 ↗
2. Hydorforming a method to manufacture light weight parts10.1016/0924-0136(96)02403-X ↗
3. Lin · Trans. Nonferrous Metals Soc. China · 2005 · 15 · 132
4. M.Kleiner,W.Homberg,A.Brosius, Process and control of sheet metal hydroforming. Proceedings of the 6th International Conference on Technology of Plasticity (ICTP), Nuremberg, Germany, 1999, pp.1243-1252.
5. Yuan · 2002