journal article·2013-01

Role of grain boundaries in the high temperature performance of a highly stabilized beta titanium alloy I: Thermal stability

S.W. Xin, Y.Q. Zhao, Y.F. Lu, Q. Li, H.Y. Yang

Publisher page

Abstract

Abstract Two different microstructures with straight and bending grain boundaries were obtained after two typical heat treatments (1) annealing treatment (AnT) at 600 °C for 4 h followed by air cooling and (2) solution treatment at 850 °C for 1 h, water quenching followed by aging treatment at 550 °C for 6 h, air cooling (S-AT). The mechanical properties under room-temperature and thermal exposure conditions were tested for the alloy with different grain boundary morphologies. The results show that the grain boundaries morphology plays important role in thermal stability. The alloy with bending grain boundaries microstructure after AnT shows higher thermal plasticity in comparison to the ones with straight grain boundaries microstructure after S-AT, which is mainly resulting from the relatively small quantity and intermittent precipitations along bending grain boundaries in comparison to straight grain boundaries. The sequent microstructure evolution experiment for solution treatment at different temperatures shows the critical transformation temperature from bending grain boundaries to straight boundaries is in temperature range from 800 °C to 820 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Bania · 1988 · 825
2. Madsen · J. Mater. Eng. Perform. · 1995 · 4 · 30110.1007/BF02649067 ↗
3. Andres · 1993 · 311
4. Es-Souni · Mater. Charact. · 2001 · 46 · 36510.1016/S1044-5803(01)00136-X ↗
5. Bashir · 1993 · 319
6. Cho · 1988 · 187
7. Donlon · 1993 · 295
8. Peters · 1993 · 303
9. Viswanathan · Acta Mater. · 2002 · 50 · 496510.1016/S1359-6454(02)00280-X ↗
10. Lee · Scr. Mater. · 1999 · 40 · 26510.1016/S1359-6462(98)00433-3 ↗
11. Word · 1995 · 2377
12. Zhao · Mater. Sci. Eng. A · 2000 · 282 · 15310.1016/S0921-5093(99)00761-3 ↗
13. Leyens · 2003
14. Lütjering · 2007
15. Zhu · J. Mater. Sci. · 2004 · 39 · 238710.1023/B:JMSC.0000020000.64702.b8 ↗
16. Xin · Mater. Sci. Eng. A · 2008 · 477 · 37210.1016/j.msea.2007.06.024 ↗
17. Zhao · J. Alloys Compd. · 2006 · 407 · 11810.1016/j.jallcom.2005.06.014 ↗
18. Wang · Mater. Lett. · 2004 · 58 · 324810.1016/j.matlet.2004.06.007 ↗
19. Li · Acta Mater. · 1998 · 46 · 577710.1016/S1359-6454(98)00238-9 ↗
20. Li · Acta Mater. · 1999 · 47 · 288910.1016/S1359-6454(99)00173-1 ↗
21. Li · Acta Mater. · 2001 · 49 · 301110.1016/S1359-6454(01)00206-3 ↗