Comparison between impression creep and uni-axial tensile creep performed on nickel-based single crystal superalloys
Source abstract
Abstract
Abstract The purpose of the present work is to build the relationship between impression creep and conventional uni-axial tensile creep in determining crystallographic creep parameters for face centered cubic (FCC) nickel-based single crystal superalloys. To this aim, the impression creep performed on [0 0 1]-, [0 1 1]-, and [1 1 1]-oriented nickel-based single crystal superalloys were respectively investigated and the data was compared with those obtained with uni-axial tensile creep counterparts. It shows that the determination of crystallographic creep stress exponent is independent of crystallographic orientations, and the results agree reasonably well between impression creep and uni-axial tensile creep. However, some reveres dependence of crystallographic orientation was observed between impression creep and uni-axial tensile creep, such as the steady-state punch velocity for impression creep and steady-state elongation rate for uni-axial tensile creep, and this induced different stress conversion factors among different crystallographic orientations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Han · 1993 · 194
2. Pan · Acta Metall. Mater. · 1995 · 43 · 137510.1016/0956-7151(94)00383-S ↗
3. Mo · 1993 · 84
4. Cseh · Mater. Sci. Eng. A · 1999 · 272 · 14510.1016/S0921-5093(99)00466-9 ↗
5. Li · Mater. Sci. Eng. A · 2002 · 322 · 2310.1016/S0921-5093(01)01116-9 ↗
6. Sastry · Mater. Sci. Eng. A · 2005 · 409 · 6710.1016/j.msea.2005.05.110 ↗
7. Peng · Mater. Sci. Eng. A · 2005 · 410–411 · 4210.1016/j.msea.2005.08.031 ↗
8. Yu · J. Mater. Sci. · 1977 · 12 · 221410.1007/BF00552243 ↗
9. J.C.M. Li, in: J.C. Earthman, F.A. Mohamed (Eds.), Proceedings of the Seventh International Conference on Creep and Fracture of Engineering Materials and Structures, The Minerals, Metals & Materials Society, Warrendale, 1997, pp. 109–117.
10. Dorner · Mater. Sci. Eng. A · 2003 · 357 · 34610.1016/S0921-5093(03)00205-3 ↗
11. Xu · Mater. Sci. Eng. A · 2008 · 478 · 18710.1016/j.msea.2007.07.038 ↗
12. B.X. Xu. A. Yonezu, Z.F. Yue, et al., Comput. Mater. Sci. (2009), doi:10.1016/j.commatsci.2009.03.004.10.1016/j.commatsci.2009.03.004 ↗
13. ABAQUS, ABAQUS 6.4 User's Manual, ABAQUS Inc., Pawtucket, Rhode Island, 2004.
14. Yu · Mater. Sci. Eng. A · 2008 · 477 · 31910.1016/j.msea.2007.05.080 ↗
15. Yin · 2003
16. Tian · Mater. Sci. Eng. · 2004 · 379 · 14110.1016/j.msea.2004.01.049 ↗
17. Heredia · Acta Metall. · 1986 · 34 · 27910.1016/0001-6160(86)90198-7 ↗
18. Yue · Theor. Appl. Fract. Mech. · 1996 · 25 · 12710.1016/0167-8442(96)00015-8 ↗
19. Yu · Philos. Mag. · 1977 · 36 · 81110.1080/14786437708239760 ↗
20. Hyde · Int. J. Mech. Sci. · 1993 · 35 · 45110.1016/0020-7403(93)90035-S ↗
21. Hyde · Mater. High. Temp. · 1995 · 13 · 13310.1080/09603409.1995.11689511 ↗
22. Takagi · Philos. Mag. · 2003 · 83 · 395910.1080/14786430310001616045 ↗
23. Liu · Mater. Sci. Eng. A · 2007 · 456 · 10310.1016/j.msea.2006.11.098 ↗
24. Chu · Mater. Sci. Eng. · 1979 · 39 · 110.1016/0025-5416(79)90164-2 ↗
25. Butt · J. Mater. Res. · 1996 · 11 · 152810.1557/JMR.1996.0191 ↗
26. Chiang · J. Mater. Res. · 1994 · 9 · 90310.1557/JMR.1994.0903 ↗