journal article·2013-10

Evaluation method of sensitivity of hydrogen embrittlement for high strength bolts

Jong-Oh Ham, Yo-Han Jang, Geun-Pil Lee, Bok-Gi Kim, Ki-Ho Rhee, Chun-Kang Cho

Publisher page

Abstract

Abstract In this study, high strength bolts of 1100 MPa and 1300 MPa grades were charged with hydrogen to measure the sensitivity of hydrogen embrittlement (HE). Different levels of stress conditions based on various tensile stress and strain rates were applied. The bolts were then examined to see whether cracks were formed on the screw threads. The tensile stress and strain rate condition producing the most number of cracks on the screw thread of the bolt was decided as the most suitable test condition for the measurement of sensitivity of HE. For 1100 MPa grade high strength bolts, the most cracks were observed at the tensile stress ratio of 0.85 (load of 80 kN) and strain rate of 1.6×10E−5/s, while for 1300 MPa grades, the most cracks were observed at tensile stress ratio 0.87 (load of 100 kN) and strain rate of 1.6×10E−5/s. No cracks were found on the screw threads of bolt when the strain rate was increased over 8.3×10E−4/s.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Wang · Scr. Mater · 2005 · 52 · 40310.1016/j.scriptamat.2004.10.023 ↗
2. Yamasaki · Nippon Steel Tech. Rep. · 1999 · 80 · 50
3. Kitagawa · J. Mater. Sci. · 2008 · 43 · 1210.1007/s10853-007-2150-4 ↗
4. Godoi · Mater. Sci. Eng. A · 2003 · 354 · 25110.1016/S0921-5093(03)00014-5 ↗
5. Seo · Met. Mater. Int. · 2008 · 14 · 51510.3365/met.mat.2008.08.515 ↗
6. Bernstein · Int. Mater. Rev. · 1976 · 21 · 269
7. Shoda · ISIJ Int. · 2010 · 50 · 11510.2355/isijinternational.50.115 ↗
8. Takai · Acta Mater. · 2008 · 56 · 515810.1016/j.actamat.2008.06.031 ↗
9. Takasawa · ISIJ Int. · 2010 · 50 · 149610.2355/isijinternational.50.1496 ↗
10. ASTM E1019-11, Standard test methods for determination of carbon, sulfur, nitrogen, and oxygen in steel, iron, nickel, and cobalt alloys by various combustion and fusion techniques, Annual Book of ASTM Standards, ASTM, West Conshohocken, 2011.
11. ISO 15330:1999(E), Fasteners—Preloading Test for the Detection of Hydrogen Embrittlement—Parallel Bearing Surface Method, ISO, Switzerland, 1999.
12. ISO 3690:2012(E), Welding and Allied Processes—Determination of Hydrogen Content in Arc Weld Metal, ISO, Switzerland, 2012.
13. ISO 898-1: 2013(E), Mechanical Properties of Fasteners made of Carbon Steel and Alloy Steel—Part 1: Bolts, Screws and Studs with Specified Property Classes—Coarse Thread and Fine Pitch Thread, ISO, Switzerland, 2013.
14. ASTM A 1031-05, Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled, Annual Book of ASTM Standards, ASTM, West Conshohocken, 2005.
15. ASTM A 519-06(2012), Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing, Annual Book of ASTM Standards, ASTM, West Conshohocken, 2012.
16. Ham · Kor. J. Met. Mater. · 2011 · 49 · 110.3365/KJMM.2011.49.1.001 ↗
17. T. Nakamoto, H. Suzuki, Y. Hagihara, K. Takai,, Materials Science and Technology (MS&T) 2011, Columbus, Ohio, 2011, pp. 1226–1233.