journal article·2003-11

A submicron mild steel produced by simple warm deformation

Mingyuan Liu, Bi Shi, Gang Bi, Hanging Cao, X. Cai, Hongwei Song

Materials Science and Engineering: A· Volume 360· Issue 1-2
Publisher page

Abstract

One simple deformation process, through which a submicron ferrite grained mild steel was fabricated, was introduced. According to the transmission electron microscope images of the microstructures, most of the boundaries formed during the process might be low angle boundaries, which means that most of the ultrafine grains are subgrains. This deformation process is attractive because: (1) the necessary strain was only 1.5, (2) the deformation resistance decreased due to higher rolling temperature, and (3) the as warm-rolled mild steel had a microstructure with equiaxed grains of 0.7 μm in average diameter. The result of mechanical tests indicates that better properties, with comparison to its coarse-grained counterpart, were obtained, including doubled yield strength, high hardness, good work hardening and reliable elongation. Cross effect was observed during tensile process and interpreted from point view of conventional dislocation movement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Valiev · Prog. Mater. Sci. · 2000 · 45 · 10310.1016/S0079-6425(99)00007-9 ↗
2. Alexandrov · Nanostruct. Mater. · 1999 · 12 · 70910.1016/S0965-9773(99)00223-8 ↗
3. Valiev · Nanostruct. Mater. · 1999 · 12 · 3510.1016/S0965-9773(99)00061-6 ↗
4. Belyakov · Mater. Trans. JIM · 2000 · 41 · 47610.2320/matertrans1989.41.476 ↗
5. Tsuji · Scr. Mater. · 1999 · 40 · 79510.1016/S1359-6462(99)00015-9 ↗
6. Hurley · Mater. Sci. Eng. A · 2001 · 302 · 20610.1016/S0921-5093(00)01823-2 ↗
7. Ueji · Acta Mater. · 2002 · 50 · 417710.1016/S1359-6454(02)00260-4 ↗
8. Shin · Mater. Sci. Eng. A · 2002 · 325 · 3110.1016/S0921-5093(01)01415-0 ↗
9. Howe · Mater. Sci. Tech. · 2000 · 16 · 126410.1179/026708300101507488 ↗
10. Park · Metall. Mater. Trans. A · 2002 · 33A · 70510.1007/s11661-002-0134-1 ↗
11. Valiev · Acta Metal. Mater. · 1994 · 42 · 246710.1016/0956-7151(94)90326-3 ↗
12. Tsuji · Tetsu-to Hagane · 2002 · 88 · 110.2355/tetsutohagane1955.88.7_359 ↗
13. Shin · Acta Mater. · 2000 · 48 · 224710.1016/S1359-6454(00)00028-8 ↗
14. Shin · Acta Mater. · 2000 · 48 · 324510.1016/S1359-6454(00)00090-2 ↗
15. Park · Metall. Mater. Trans. · 2001 · 32A · 237310.1007/s11661-001-0211-x ↗
16. P.D. Hodgson, M.R. Hickson, R.K. Gibbs. US Patent 6027587, 2000.
17. Hurley · Scr. Mater. · 1999 · 40 · 43310.1016/S1359-6462(98)00442-4 ↗
18. Hodgson · Scr. Mater. · 1999 · 40 · 117910.1016/S1359-6462(98)00411-4 ↗
19. Young · J. Iron Steel Inst. Sep. · 1973 · 211 · 640
20. Bourell · Metall. Trans. · 1981 · 12A · 14010.1007/BF02648520 ↗
21. Sherby · Prog. Mater. Sci. · 1968 · 13 · 32510.1016/0079-6425(68)90024-8 ↗
22. Belyakov · Metall. Mater. Trans. · 1998 · 29A · 16110.1007/s11661-998-0169-z ↗
23. Niikura · J. Mater. Proc. Tech. · 2001 · 117 · 34110.1016/S0924-0136(01)00800-7 ↗
24. Akbari · Acta Mater. · 1997 · 45 · 504710.1016/S1359-6454(97)00170-5 ↗
25. Najafi-Zadeh · Mater. Sci. Forum · 1993 · 113–115 · 44110.4028/www.scientific.net/MSF.113-115.441 ↗
26. Strauven · Acta Metall. · 1987 · 35 · 102910.1016/0001-6160(87)90050-2 ↗
27. Hayes · Mater. Sci. Tech. · 2000 · 16 · 125910.1179/026708300101507479 ↗
28. Hull Derek. Introduction to Dislocations. Headington Hill Hall, Oxford, 1975, p. 359
29. Johnson · J. Appl. Phys. · 1959 · 30 · 12910.1063/1.1735121 ↗
30. Mughrabi · 1993 · 131