Preparation, characterization and microstructural optimization of a thin γ-alumina membrane on a porous stainless steel substrate
Source abstract
Abstract
Abstract In this work, a supported mesoporous (MEP) γ-Al 2 O 3 membrane was synthesized on conventional α-Al 2 O 3 substrates by sol–gel dip coating process. In the following, the preparation of a novel metallic–ceramic composite membrane was studied, which incorporated desirable properties of both ceramic membrane and porous metallic substrate. For this purpose, mesoporous alumina membrane layer was developed on a porous 316L stainless steel substrate. The substrate was prepared by loose powder sintering and modified by soaking–rolling and fast drying method. The prepared membranes were characterized using scanning electron microscope (SEM), field emission scanning electron microscope (FESEM), X-ray diffractometer (XRD) and N 2 -adsorption/desorption measurements (BET analyses). The results revealed that a defect-free γ-alumina membrane with 2.1 nm average pore size can be produced. Permeation tests with N 2 gas revealed that the stainless steel substrate had 40 times more permeability than conventionally used alumina support. Additionally, single gas permeation of γ-alumina membrane for CO 2 and N 2 was compared. It was observed that CO 2 could be separated from N 2 by the MEP γ-Al 2 O 3 membrane in high pressure permeation condition, where stainless steel presents superior mechanical strength than alumina as a substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Advanced ceramic materials synthesis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lee · Sep. Purif. Technol. · 2006 · 49 · 4910.1016/j.seppur.2005.08.007 ↗
2. Babaluo · J. Eur. Ceram. Soc. · 2004 · 24 · 377910.1016/j.jeurceramsoc.2004.01.007 ↗
3. Kuzniatsova · J. Membr. Sci. · 2008 · 316 · 8010.1016/j.memsci.2007.11.047 ↗
4. Ahmad · J. Membr. Sci. · 2005 · 262 · 12910.1016/j.memsci.2005.06.042 ↗
5. Othman · Micropor. Mesopor. Mater. · 2008 · 112 · 40310.1016/j.micromeso.2007.10.016 ↗
6. Chen · Appl. Catal. B: Environ. · 2006 · 69 · 2410.1016/j.apcatb.2006.05.002 ↗
7. Li · J. Membr. Sci. · 2009 · 326 · 53310.1016/j.memsci.2008.10.035 ↗
8. Gestel · Solid State Ionics · 2008 · 179 · 136010.1016/j.ssi.2008.02.046 ↗
9. T. Tanaka, H. Mitani, K. Yamamoto, K. Yura, T. Sato, US Patent 0067344 Al (2005).
10. K.H. Lee, Y.K. Lee, D.W. Lee, B.K. Sea, US Patent 0059514 Al (2007).
11. Schaep · J. Membr. Sci. · 1999 · 163 · 22910.1016/S0376-7388(99)00163-5 ↗
12. Cheong · J. Alloys Compd. · 1999 · 290 · 30410.1016/S0925-8388(99)00240-6 ↗
13. Sun · J. Colloid Interface Sci. · 2008 · 319 · 24710.1016/j.jcis.2007.11.023 ↗
14. Keizer · J. Membr. Sci. · 1988 · 39 · 28510.1016/S0376-7388(00)80935-7 ↗
15. Uhlhorn · J. Membr. Sci. · 1989 · 46 · 22510.1016/S0376-7388(00)80337-3 ↗
16. Ch. Ahslund, K.H.T. Andersson, S.S. Bergh, US Patent 4435483 (1982).
17. Li · 2008
18. D. Yu, PhD Thesis, The Ohio State University, USA, 2006, pp. 118–119.
19. Lee · J. Membr. Sci. · 2007 · 302 · 26510.1016/j.memsci.2007.06.054 ↗
20. Lafarga · J. Membr. Sci. · 1998 · 147 · 17310.1016/S0376-7388(98)00134-3 ↗
21. Gestel · J. Membr. Sci. · 2002 · 207 · 7310.1016/S0376-7388(02)00053-4 ↗
22. Verweij · J. Mater. Sci. · 2003 · 38 · 467710.1023/A:1027410616041 ↗
23. Chowdhury · Langmuir · 2004 · 20 · 454810.1021/la0364237 ↗
24. Samuel de Lint · J. Membr. Sci. · 2005 · 248 · 14910.1016/j.memsci.2004.08.026 ↗
25. Schillo · J. Membr. Sci. · 2010 · 362 · 12710.1016/j.memsci.2010.06.030 ↗