journal article·2008-09

Simulation of radial forging conditions by third hits hot compression tests

Afshin Bapari, Abbas Najafizadeh, Mohammad Moazeny, Ali Shafyei

Materials Science and Engineering: A· Volume 491· Issue 1-2
Publisher page

Abstract

Radial forging conditions of ultra-high strength 32CrMoV1210 steel was investigated by using multi-pass hot compression tests. Compression continuous cooling transformation (CCCT) diagram after final deformation pass was plotted and compared with CCT diagram in order to identify the effects of deformation on transformation behavior. Comparison between these two diagrams showed that prior deformation increased martensite start temperature, Ms from 45 to 85 ◦ C. The microstructural observation illustrated that application of prior deformation leads to finer lath martensite. It also showed that when deformation temperatures decreased, the grain size and its distributions became finer and inhomogeneous, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Tamura · 1988
2. McQueen · J. Appl. Metalworking · 1985 · 3 · 41010.1007/BF02833663 ↗
3. Priestner · J. Iron Steel Inst. · 1968 · 206 · 1252
4. Sekine · Metals Soc. · 1973 · 1 · 85
5. Dilamore · Metal. Tech. · 1975 · 2 · 29410.1179/030716975803277276 ↗
6. Jandova · Mater. Sci. Eng. · 2003 · A349 · 3610.1016/S0921-5093(02)00373-8 ↗
7. Müllner · Mater. Sci. Eng. A · 1997 · 230 · 10710.1016/S0921-5093(97)00023-3 ↗
8. Mahajan · Int. Metall. Rev. · 1973 · 18 · 4310.1179/imr.1973.18.2.43 ↗
9. Mizera · Mater. Sci. Eng. · 1989 · A112 · 3910.1016/0921-5093(89)90341-9 ↗
10. Lee · Metal. Trans. A · 1990 · 21 · 243710.1007/BF02646988 ↗
11. Inagaki · Trans. Iron Steel Inst. · 1983 · 23 · 61
12. Umemoto · Testsu to Hagane · 1982 · 68 · S1384
13. Robert · Metal Soc. · 1980 · 368
14. Dorazil · 1990
15. Marder · Trans. Q · 1967 · 60 · 651
16. Marder · Trans. ASM · 1969 · 62 · 1
17. Maki · Trans. Iron Steel Inst. Jpn. · 1980 · 20 · 20710.2355/isijinternational1966.20.207 ↗
18. Morito · Acta Mater. · 2003 · 51 · 178910.1016/S1359-6454(02)00577-3 ↗
19. Matsuda · 1971 · 47
20. Swarr · Metall. Trans. A · 1976 · 7A · 4110.1007/BF02644037 ↗
21. Nörstrom · Scand. J. Metall. · 1976 · 5 · 159
22. F. B. Pickering, Hardenability Concepts with Applications to Steel, American Institute of Min. Metall. and Petroleum Engin., Warrendale, PA, (1978) 179.
23. Krauss · Mater. Sci. Eng. · 1999 · A40 · 273
24. Roberts · Metall. Trans. · 1970 · 1 · 328710.1007/BF03037855 ↗
25. Katsumata · Mater. Trans. JIM · 1991 · 32 · 71510.2320/matertrans1989.32.715 ↗
26. Garcia-Mateo · Mater. Sci. Eng. · 2004 · A378 · 28910.1016/j.msea.2003.10.355 ↗
27. Cech · Trans. AIME · 1956 · 206 · 124
28. Esterling · Acta Metall. · 1971 · 19 · 11710.1016/0001-6160(71)90124-6 ↗
29. Porter · 1981
30. Patel · Acta Metall. · 1953 · 1 · 53110.1016/0001-6160(53)90083-2 ↗
31. H.K.D.H. Bhadeshia, Martensite in Steels; http://www.msm.cam.ac.uk/phase-trans/2002/martensite.html, 2006.
32. Nichol · Metall. Trans. A · 1977 · 8A · 187710.1007/BF02646560 ↗
33. Breinan · Metall. Trans. · 1970 · 1 · 151310.1007/BF02641994 ↗
34. Metalravne Web Site: http://www.metalravne.si/selector/steels/po209.html, 2008.
35. ASM Handbook, vol. 14 (1988) 145.
36. ASM Handbook, vol. 8 (2000) 143.
37. Bodnar · Metallography · 1984 · 17 · 10910.1016/0026-0800(84)90009-0 ↗
38. Vander Voort · 1984
39. Liu · Can. Metall. Q · 1987 · 26 · 14510.1179/cmq.1987.26.2.145 ↗
40. Krauss · 1980