Stress-induced phase transformation characteristics and its effect on the enhanced ductility in continuous columnar-grained polycrystalline Cu–12wt%Al alloy
Source abstract
Abstract
Abstract The microstructure evolution and stress-induced phase transformation (SIPT) characteristics of continuous columnar-grained (CCG) polycrystalline Cu–12 wt % Al alloy during the tensile deformation process were investigated to understand the ductility enhancement mechanism, which shows a tensile elongation of 28%, nine times as high as that of the conventional as-cast polycrystalline counterpart. The results show that the CCG alloy has highly-oriented 〈001〉β texture and straight low-energy grain boundaries (GBs) along solidification direction, which significantly promote grains compatibility during plastic deformation. Additionally, besides β 1 '→α 1 ' transformation, β 1 '→γ 1 '→α 1 ' SIPT was also observed simultaneously in the CCG polycrystalline Cu–12 wt % Al alloy, which is different from single crystalline and conventional polycrystalline counterparts. As a consequence of the special phase transformations, high phase transformation plasticity (15–20%) and prominent subsequent plastic deformation (8–13%) of the phase transformation product α 1 ' martensite can be obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. ASM Metals Handbook, Properties and Selection Nonferrous Alloys and Special Purpose Materials, ASM International, Materials Park, Ohio, 1991.
2. Davis · 2001
3. Ahlers · Prog. Mater. Sci. · 1986 · 30 · 13510.1016/0079-6425(86)90007-1 ↗
4. Sato · Acta Metall. · 1967 · 15 · 138110.1016/0001-6160(67)90013-2 ↗
5. Kajiwara · J. Phys. Soc. Jpn. · 1969 · 27 · 71210.1143/JPSJ.27.712 ↗
6. Tas · Scr. Metall. · 1971 · 5 · 111710.1016/0036-9748(71)90184-0 ↗
7. Tas · Z. Metallkd. · 1973 · 64 · 855
8. Tas · Z. Metallkd. · 1973 · 64 · 862
9. Warlimont · Prog. Mater. Sci. · 1974 · 18 · 110.1016/0079-6425(74)90001-2 ↗
10. Gyobu · J. Phys. Colloq. · 1982 · 43 · 64110.1051/jphyscol:19824103 ↗
11. Huang · Mater. Lett. · 2012 · 79 · 5110.1016/j.matlet.2012.03.088 ↗
12. Khan · J. Mater. Sci. · 1972 · 7 · 140110.1007/BF00574932 ↗
13. Motoyasu · Metall. Mater. Trans. A · 2001 · 32 · 58510.1007/s11661-001-0075-0 ↗
14. H. Zhang (Volume Dissertation of Doctoral Degree), University of Science and Technology Beijing, Beijing, 2003.
15. Drar · Mater. Lett. · 2007 · 61 · 39210.1016/j.matlet.2006.04.112 ↗
16. Luan · Mater. Sci. Eng. A · 2010 · 527 · 448410.1016/j.msea.2010.03.096 ↗
17. Okayasu · Mater. Sci. Eng. A · 2010 · 527 · 312010.1016/j.msea.2010.01.071 ↗
18. Fu · Mater. Lett. · 2011 · 65 · 141610.1016/j.matlet.2011.02.020 ↗
19. Gao · Mater. Sci. Eng. A · 2010 · 527 · 475010.1016/j.msea.2010.04.019 ↗
20. Wang · Mater. Sci. Eng. A · 2011 · 530 · 41810.1016/j.msea.2011.09.105 ↗
21. Wang · Mater. Lett. · 2011 · 65 · 112310.1016/j.matlet.2011.01.039 ↗
22. Efstathiou · Acta Mater. · 2008 · 56 · 379110.1016/j.actamat.2008.04.033 ↗
23. Manchiraju · Int. J. Plasticity · 2010 · 26 · 150810.1016/j.ijplas.2010.01.009 ↗
24. Levitas · Appl. Phys. Lett. · 2013 · 102 · 25190410.1063/1.4812488 ↗
25. Barbe · Int. J. Plasticity · 2011 · 27 · 82310.1016/j.ijplas.2010.09.008 ↗
26. Kubler · Int. J. Plasticity · 2011 · 27 · 29910.1016/j.ijplas.2010.05.002 ↗
27. Lee · Int. J. Plasticity · 2010 · 26 · 68810.1016/j.ijplas.2009.10.001 ↗
28. Yu · Int. J. Plasticity · 2013 · 44 · 16110.1016/j.ijplas.2013.01.001 ↗
29. Nishiyama · Jpn. J. Appl. Phys. · 1963 · 2 · 47810.1143/JJAP.2.478 ↗
30. Ye · Metall. Trans. A · 1990 · 21 · 266910.1007/BF02646062 ↗
31. Otsuka · Trans. Jpn. Inst. Met. · 1974 · 15 · 21110.2320/matertrans1960.15.211 ↗
32. Kim · Surf. Coat. Technol. · 2005 · 199 · 4310.1016/j.surfcoat.2004.11.035 ↗