Probability characterization of tensile strength of an aluminum casting
Source abstract
Abstract
Abstract The paper statistically studies fracture properties of an aluminum low-pressure die casting component on basis of 32 tensile tests on round bar specimens. It reveals that the probability distribution of both ultimate tensile strength and fracture strain can be described using either the Weibull or the Gaussian function. Goodness-of-fit tests based on the Anderson–Darling statistic fail to reject either of them. However, the extrapolation of the distribution of the fracture strain to a probability level of 0.01% gives an unrealistic low or even negative lower-bound value. This suggests that a pass of the goodness-of-fit tests is not sufficient for identifying a physically reasonable probability distribution. At the same time, three different methods for determining the tensile fracture strain are compared: the area reduction of the fracture surface, the critical elongation of the gauge section, and the combined experimental–numerical analysis. The first one gives the most reasonable estimate. It is also found that the ultimate tensile strength linearly correlates with the projected area of pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Green · Materials Science and Engineering A · 1993 · 173 · 26110.1016/0921-5093(93)90226-5 ↗
2. Campbell · 2003
3. Taghiabadi · Materials Science and Technology · 2003 · 19 · 49710.1179/026708303225010821 ↗
4. Cox · Materials Science and Technology · 2007 · 23 · 21410.1179/174328407X157263 ↗
5. Staley · Materials Science and Engineering A · 2007 · 460 · 32410.1016/j.msea.2007.01.049 ↗
6. Doremus · Journal of Applied Physics · 1983 · 54 · 19310.1063/1.331731 ↗
7. Lu · Physical Review E · 2002 · 65 · 6710210.1103/PhysRevE.65.067102 ↗
8. Neville · Journal of the Mechanics and Physics of Solids · 1986 · 34 · 24310.1016/0022-5096(86)90020-7 ↗
9. Zhang · Acta Materialia · 2000 · 48 · 213510.1016/S1359-6454(00)00055-0 ↗
10. Knott · Philosophical Magazine A · 2002 · 82 · 345510.1080/01418610208240455 ↗
11. Wu · Journal of the Mechanics and Physics of Solids · 2004 · 52 · 90710.1016/j.jmps.2003.07.005 ↗
12. Surappa · Scripta Metallurgica · 1986 · 20 · 128110.1016/0036-9748(86)90049-9 ↗
13. Gokhale · Scripta Materialia · 2005 · 52 · 23710.1016/j.scriptamat.2004.09.011 ↗
14. Gokhale · Materials Characterization · 2005 · 54 · 1310.1016/j.matchar.2004.10.003 ↗
15. Lee · Materials Science and Engineering A · 2006 · 427 · 25510.1016/j.msea.2006.04.108 ↗
16. Minnebo · Journal of Materials Engineering and Performance · 2007 · 16 · 3510.1007/s11665-006-9005-z ↗
17. Mae · Materials Science and Engineering A · 2007 · 459 · 15610.1016/j.msea.2007.01.047 ↗
18. Mae · International Journal of Solids and Structures · 2008 · 45 · 143010.1016/j.ijsolstr.2007.10.016 ↗
19. Teng · Engineering Fracture Mechanics · 2008 · 75 · 461010.1016/j.engfracmech.2008.04.016 ↗
20. Teng · Engineereing Fracture Mechanics · 2009 · 76 · 98310.1016/j.engfracmech.2009.01.001 ↗
21. Campbell · Materials Science and Technology · 2006 · 22 · 12710.1179/174328406X74248 ↗
22. Dai · Materials Science and Technology · 2004 · 20 · 50510.1179/026708304225012387 ↗
23. Weibull · Journal of Applied Mechanics · 1951 · 18 · 29310.1115/1.4010337 ↗
24. Francis · Materials Science and Engineering A · 2005 · 407 · 32210.1016/j.msea.2005.07.042 ↗
25. 1986
26. Stephens · Journal of the American Statistical Association · 1974 · 69 · 73010.2307/2286009 ↗
27. Department of Defense · 2002