journal article·2017-08

Extraordinary strength and ductility obtained in transformation-induced plasticity steel by slightly modifying its chemical composition

N. Saeidi, M. Raeissi, H.R. Vaghei, M.M. Abdar

Publisher page

Abstract

Abstract Extraordinary mechanical properties were obtained in a low-carbon transformation-induced plasticity (TRIP) steel by modifying its chemical composition and employing thermo-mechanical processing. It was found that Cu addition to the conventional CMnSiAl TRIP steel could improve the thermal stability of high temperature austenite by decreasing the A c3 temperature and retarding the bainitic transformation, which led to the formation of retained austenite with higher volume fraction but lower carbon content. The combined effects of high strain hardening due to the TRIP effect, uniform strain distribution, higher volume fraction of thermal martensite, and nano-scale precipitation of e-Cu particles in the Cu-TRIP steel led to a high strength of 1 GPa and total elongation of approximately 50%. Moreover, a detailed scanning electron microscopy analysis showed that the copper had a noticeable effect on the morphology of the martensite phase created within the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The enhancement of ductility in high strength steels
2. Formation of austenite during intercritical annealing of dual-phase steels10.1007/BF02643686 ↗
3. Effect of retained austenite on the yielding and deformation behavior of a dual phase steel10.1016/0001-6160(83)90021-4 ↗
4. Bainite transformation in a silicon steel10.1007/BF02658309 ↗
5. Effects of volume fraction and stability of retained austenite on ductility of TRIP-aided dual-phase steels10.2355/isijinternational.32.1311 ↗
6. Mechanical properties and retained austenite in intercritically heat-treated bainite transformed steel and their variation with Si and Mn additions10.1007/BF02656816 ↗
7. Structure-properties relationship in TRIP steels containing carbide-free bainite10.1016/j.cossms.2004.10.002 ↗
8. Enhancement of the mechanical properties of a low-carbon, low-silicon steel by formation of a multiphased microstructure containing retained Austenite10.1007/s11661-998-0114-1 ↗
9. Bhadeshia · 2001
10. Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel10.2355/isijinternational1966.27.570 ↗
11. Galvanisability of silicon free CMnAI TRIP steels10.1179/026708303225009300 ↗
12. Influence of partial replacement of Si by Al on the change of phase fraction during heat treatment of TRIP steels10.1016/j.scriptamat.2007.08.022 ↗
13. The influence of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels10.2355/isijinternational.39.813 ↗
14. Influence of silicon, aluminium, phosphorus and copper on the phase transformations of low alloyed TRIP steels10.1002/srin.200200206 ↗
15. A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel10.1016/j.actamat.2004.02.044 ↗
16. A novel design to enhance the amount of retained austenite and mechanical properties in low-alloyed steel10.1016/j.scriptamat.2014.06.014 ↗
17. Quenching and partitioning martensite- A novel steel heat treatment10.1016/j.msea.2006.02.133 ↗
18. High strength low-carbon alloyed steel with good ductility by combining the retained austenite and nano-sized precipitates10.1016/j.msea.2013.06.022 ↗
19. Fundamental metallurgical considerations
20. Copper-containing structural steels
21. Effects of Cu on diffusional transformation behavior and microstructure in Fe-Mn-Si-C steels10.2355/isijinternational.37.296 ↗
22. Jatczak · 1980
23. Effect of alloying additions on lattice parameter of austenite
24. Splat quenching of iron-carbon alloys
25. Effect of continuous galvanizing heat treatments on the microstructure and mechanical properties of high Al-low Si transformation induced plasticity steels10.1007/s11661-010-0185-7 ↗
26. Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel10.1016/j.msea.2015.03.069 ↗
27. A.A. Gorni, Steel Forming and Heat Treating Handbook, Sao Vicente, 2017.
28. Effects of initial microstructure and thermomechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels10.1016/j.msea.2014.06.031 ↗
29. EBSD study of damage mechanisms in a high-strength ferrite-martensite dual-phase steel10.1007/s11665-014-1257-4 ↗
30. EBSD study of micromechanisms involved in high deformation ability of DP steels10.1016/j.matdes.2015.07.134 ↗
31. Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel10.1016/j.scriptamat.2016.10.025 ↗
32. Effects of second phase morphology on retained austenite morphology and tensile properties in a TRIP-aided dual-phase steel sheet10.2355/isijinternational.33.775 ↗
33. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗
34. Thermo-mechanical processing of TRIP-aided steels10.1007/s11661-015-2885-5 ↗
35. Examination and modeling of void growth kinetics in modern high strength dual phase steels during uniaxial tensile deformation10.1016/j.matchemphys.2015.12.059 ↗
36. Evaluation of fracture micromechanisms in a fine-grained dual phase steel during uniaxial tensile deformation10.1002/srin.201300344 ↗