journal article·2008-08

VC-doped WC–NbC–Co hardmetals

S.G. Huang, O. Van der Biest, J. Vleugels

Materials Science and Engineering: A· Volume 488· Issue 1-2
Publisher page

Abstract

Abstract The influence of the addition of 0.9, 1.8, 3.6 and 5.4 wt.% VC on the microstructure and mechanical properties of WC–NbC–12 wt.% Co with 10, 20, 30 or 40 wt.% NbC hardmetals prepared by conventional liquid phase sintering in vacuum for 1 h at 1420 °C was investigated. Microstructural analysis revealed that the WC grain size as well as the amount of residual WC–Co in the sintered hardmetals was strongly influenced by the VC and NbC content. The WC grain growth could be strongly limited and even completely inhibited by the combined addition of NbC and VC, whereas the NbC phase converted into a (Nb,W,V)C solid solution during sintering. Microstructural investigation was supported by thermodynamic equilibrium calculations to predict the composition of the NbC phase as a function of the NbC and VC content in the starting powder. The fracture toughness and hardness of the hardmetals were evaluated and explained in terms of the final WC grain size and the residual WC–Co fraction in the hardmetal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Bock · Powder Metall. · 1992 · 24 · 20
2. Luyckx · Powder Metall. · 1996 · 39 · 21010.1179/pom.1996.39.3.210 ↗
3. Morton · Int. J. Refract. Met. Hard Mater. · 2005 · 23 · 28710.1016/j.ijrmhm.2005.05.011 ↗
4. VC, Cr3C2 and NbC doped WC–Co cemented carbides prepared by pulse electric current sintering10.1016/j.ijrmhm.2006.11.003 ↗
5. Arenas · Int. J. Refract. Met. Hard Mater. · 1999 · 17 · 9110.1016/S0263-4368(98)00061-4 ↗
6. Cho · Int. J. Refract. Met. Hard Mater. · 1997 · 15 · 20510.1016/S0263-4368(97)00005-X ↗
7. Huang · J. Alloys Compd. · 2005 · 395 · 6810.1016/j.jallcom.2004.11.047 ↗
8. Zackrisson · Int. J. Refract. Met. Hard Mater. · 1998 · 16 · 41710.1016/S0263-4368(98)00048-1 ↗
9. Huang · J. Alloys Compd. · 2007 · 430 · 15810.1016/j.jallcom.2006.05.015 ↗
10. S.G. Huang, R.L. Liu, L. Li, O. Van der Biest, NbC as grain growth inhibitor and carbide in WC–Co hardmetals, Int. J. Refract. Met. Hard Mater., 2007 in press.10.1016/j.ijrmhm.2007.09.003 ↗
11. Suryanarayana · 1998
12. ASTM Standard B 276-91, Standard Test Method for Apparent Porosity in Cemented Carbides, ASTM Annual Book of Standards, Philadelphia, PA, 1996.
13. Image-Pro Plus, Version 4, Media Cybernetics, Silver Spring, Maryland.
14. Shetty · J. Mater. Res. · 1985 · 20 · 1873
15. Sundman · Calphad · 1985 · 9 · 15310.1016/0364-5916(85)90021-5 ↗
16. Viatte · Int. J. Refract. Met. Hard Mater. · 1999 · 17 · 7910.1016/S0263-4368(98)00044-4 ↗
17. Lay · Int. J. Refract. Met. Hard Mater. · 2002 · 20 · 6110.1016/S0263-4368(01)00071-3 ↗
18. Choi · Powder Metall. · 2000 · 43 · 16810.1179/003258900665943 ↗
19. Taniuchi · 1997 · 644