Oxide formation in the Sprayform Tool Process
Source abstract
Abstract
The Sprayform Tool Process is a novel alternative to CNC machining for the rapid manufacture of hard tooling. The process is based on the robot controlled sprayforming of molten steel droplets onto a ceramic master pattern to form a thick, dimensionally accurate steel shell. This paper describes the Sprayform Tool Process, and investigates the evolution of microstructure in thick steel shells in terms of the oxide fraction as a function of process parameters: (i) spray height; (ii) atomising gas pressure; (iii) wire feed rate; and (iv) manipulating robot velocity. Spray height had the strongest influence on oxide content; by reducing spray height from 160 to 120 mm the oxide fraction in the microstructure was halved. The role of droplet splashing on the subsequent oxidation of splash droplets has been revealed as an important phenomenon controlling sprayed microstructure and oxide fraction. On the basis of the presented experimental results, the implications for the manufacture of large steel shells by the Sprayform Tool Process are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Additive Manufacturing and 3D Printing Technologies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley, 1995.
2. A.P. Newbery, P.S. Grant, R.M. Jordan, A.D. Roche, T.C. Carr, in: Proceedings of the Fifteenth International Thermal Spray Conference, Nice, France, 25–28 May 1998, ASM International, OH, pp. 1223.10.31399/asm.cp.itsc1998p1223 ↗
3. Chua · Int. J. Adv. Manuf. Technol. · 1999 · 15 · 60910.1007/s001700050109 ↗
4. B. Zu, X. Liu, S. Ma, Z. Chen, in: Proceedings of the Fifteenth International Thermal Spray Conference, Nice, France, 25–28 May 1988, ASM International, OH, pp. 1039.
5. R.M. Jordan, A.D. Roche, United States Patent 5952056 (1999).
6. M.T. Lusk, R. Jaramillo, A.D. Roche, C. Mgbokwere, S. Deshpande, in: R. Srinivasan, S.L. Semiatin, A. Beaudoin, S. Fox, Z. Jin (Eds.), Microstructural Modeling and Prediction During Thermomechanical Processing, The Minerals, Metals and Materials Society, Pennsylvania, 2001, pp. 75–84.
7. Wang · J. Therm. Spray Technol. · 1999 · 8 · 56510.1361/105996399770350269 ↗
8. P.S. Grant, T. Rayment, Z. Djuric, S. Hoile, P. Jones, S. Duncan, A.D. Roche, D. Field, in: Proceedings of the Seventh Time Compression Technologies Conference, Manchester, UK, 16–17 October 2002, Rapid News Publications PLC and Time-Compression Technologies, Cheshire, 2002.
9. Neiser · J. Therm. Spray Technol. · 1998 · 7 · 53710.1361/105996398770350765 ↗
10. P.D.A. Jones, S.R. Duncan, T. Rayment, P.S. Grant, UK Patent Application GB/0115731.2 (2001).
11. Newbery · J. Therm. Spray Technol. · 2000 · 9 · 25010.1361/105996300770350005 ↗
12. Djurić · Modell. Simul. Mater. Sci. Eng. · 2001 · 9 · 11110.1088/0965-0393/9/2/305 ↗
13. Watanabe · Thin Solid Films · 1998 · 316 · 16910.1016/S0040-6090(98)00409-X ↗
14. A.P. Newbery, P.S. Grant, Powder Metall. 46 (2003) 229.10.1179/003258902225000000 ↗
15. P.S. Grant, A.P. Newbery, Surf. Coat. Technol. (August 2003), submitted for publication.
16. Jandin · Mater. Sci. Eng. · 2003 · A349 · 29810.1016/S0921-5093(02)00767-0 ↗
17. Hedges · Mater. Sci. Eng. · 2002 · A326 · 7910.1016/S0921-5093(01)01431-9 ↗
18. T. Rayment, P.S. Grant, in: Proceedings of the Thirteenth International Federation for Heat Treatment and Surface Engineering Congress/International Surface Engineering Congress, Columbia, OH, 7–10 October 2002, ASM International, OH.