journal article·2004-09

Properties of 316L/PSZ composites fabricated by means of extrusion forming and gas-pressure sintering

Wenquan Zhang, Jianxin Xie, Congzeng Wang

Materials Science and Engineering: A· Volume 382· Issue 1-2
Publisher page

Abstract

Abstract To fabricate metal–ceramic multilayer hollow functionally gradient materials (FGMs) that might meet the requirement of repeated service and long working time of high temperature burners, such as spacecraft engine, the microstructure and properties of composites of stainless steel and partially stabilized zirconia were investigated. Samples of different proportions of stainless steel (316L) to partially yttria-stabilized zirconia (PSZ) were fabricated by powder extrusion and sintering method. Shrinkage, relative density, microstructure, micro-Vickers hardness, compression strength, bending strength, fractographic morphology, Young’s modulus, coefficient of thermal expansion, thermal diffusivity and thermal conductivity and electric-resistivity of gas-pressure sintered samples with different proportions of stainless steel were measured. The results shows that threshold of ceramic matrix composites (CMCs) and metal matrix composites (MMCs) are approximately equal to 50 vol.% 316L and 60 vol.% 316L, respectively, and there is some difference between mechanical properties and physical properties in transient point.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Niino · J. Jpn. Soc. Compos. Mater. · 1987 · 13 · 25710.6089/jscm.13.257 ↗
2. Zheng · Technol. Astron. Mater. · 1992 · 6 · 17
3. A. Kawasaki, R. Watanabe, in: S. Somiya, M. Shimada, R. Watanabe (Eds.), Proceedings of the 4th International Symposium on Science and Technology of Sintering, vol. 2, Elsevier Applied Science, Tokyo, Japan, 1987, pp. 1197–1202.10.1007/978-94-009-1373-8_201 ↗
4. Sasaki · J. Ceram. Soc. Jpn. Int. Ed. · 1991 · 99 · 970
5. M. Gasik, in: Proceedings of 1998 Powder Metallurgy World Congress, vol. 5, European Powder Metallurgy Association, Granada, 1998, pp. 357–362.
6. Kawasaki · Ceram. Int. · 1997 · 23 · 7310.1016/0272-8842(95)00143-3 ↗
7. J.X. Xie, T.Y. Zuo, Z.C. Chen, K. Ikeda, T. Murakami, Chin. J. Mater. Res. Suppl. 9 (1995) 652–658.
8. Chen · J. Jpn. Soc. Technol. Plast. · 1995 · 36 · 1003
9. Chen · J. Jpn. Soc. Technol. Plast. · 1996 · 37 · 647
10. Chen · J. Jpn. Soc. Technol. Plast. · 1996 · 37 · 653
11. Xie · J. Univ. Sci. Technol. Beijing · 1997 · 19 · 590
12. Chen · J. Mater. Sci. · 2000 · 35 · 251710.1023/A:1004786222621 ↗
13. Saravanan · Mater. Sci. Eng. · 2000 · A276 · 10810.1016/S0921-5093(99)00498-0 ↗
14. C.M. Zhou, W. Xiao, Z.X. Lin, J. Nanchang Inst. Aeron. Technol. Suppl. 1 (1996) 35–40.
15. Sui · J. South Chin. Univ. Technol. Nat. Sci. · 1996 · 24 · 17
16. Wang · Tribology · 1997 · 17 · 89
17. Ted Guo · Compos. Sci. Technol. · 2000 · 60 · 6510.1016/S0266-3538(99)00106-2 ↗
18. Deng · J. South Chin. Univ. Technol. Nat. Sci. Ed. · 2001 · 29 · 62
19. J.G. L, Y.Y. L, H.Q. Ru, W. Sun, Z.J. Zhao, X.D. Sun, Chin. J. Nonferrous Met. 8 (Suppl. 2) (1998) 145–146.
20. Liu · Acta Mater. · 1996 · 44 · 81310.1016/1359-6454(95)00205-7 ↗
21. Nan · Acta Phys. Sin. · 1987 · 36 · 51110.7498/aps.36.511 ↗
22. Nan · J. Chin. Ceram. Soc. · 1993 · 21 · 272
23. Fan · Sci. Chin. Ser. A · 1995 · 25 · 777
24. Fan · J. Inorg. Mater. · 1997 · 12 · 115
25. Fan · Mater. Sci. Eng. · 1999 · A261 · 84